#1 Home Improvement Retailer

5-3/8 in. x 16-Tooth x 3/8 in. Arbor Framing Circular Saw Blade

$12.97
  • Compatible with 5 3/8" trim saws, portable and low powered saws
  • Cuts 2x lumber, pressure treated, OSB and hardwoods
  • Super thin laser cut kerf for fast, durable, & clean cuts
  • View More Details
How to Get It

Frequently Bought Together

+
+
Price:
$1297

Product Overview

Diablo's premium 5-3/8 in. x 16 Tooth Cordless Trim Saw Blade has teeth made of Ti-Co high density carbide with titanium and cobalt for a design that is durable and long-lasting. Cut from Hardcore Steel with high precision lasers, the blade's ultra thin kerf design provides fast, effortless cuts. Non-stick Perma-Shield coating protects the blade from heat and corrosion, reduces friction and pitch buildup. Laser-cut stabilizer vents absorb noise and reduce vibration for a cleaner cut and longer life.
  • Kickback reducing design
  • Super thin kerf design requires less power, thus extending the battery life of cordless saws and motor life of corded saws
  • Laser-cut thin kerf design gives fast, clean cuts
  • Laser-cut stabilizer vents for reduced vibration and precise cuts
  • Alternate Top Bevel (ATB) tooth geometry where the top bevel alternates from right to left providing for a smooth, clean cut
  • Durable TiCo high-density carbide teeth for razor-sharp cuts and longer blade life
  • Perma-shield permanent coating prevents gumming and corrosion
  • Covered by limited lifetime warranty
  • Diameter: 5-3/8 in.
  • Teeth: 16 ATB
  • Hook angle: 18 degrees
  • Arbor: 10mm

Additional Resources

From the Manufacturer

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.7
    out of 6,681 reviews
  • 94%recommend this product
Filter by:
Showing 1-10 of 6,681 reviews
Smooth as Butter
This blade I've noticed cuts a bit more quiet than other brands I've used. The mitered ends are smooth and most of the time leave a few if any burrs. I use this blade in my evolution chop saw. Much better of a blade over the old asphalt blades. Buy this!! You won't be disappointed
by
    • Recommended
    Cuts thinner aluminum Diamond Plate like butter. But best to...
    Cuts thinner aluminum Diamond Plate like butter. But best to cut from smooth backside because the circular saw gets caught on the actual raised diamond plate. Also make sure to cut as close as possible to work table to eliminate vibrations of the plate being cut.
    by
    • Verified Purchase
    Junk
    Bought this Steel Demon blade to make 6 mitered cuts in 1x1x0.63" square tube for a mailbox mounting bracket. Right out of the packaging, it did nothing but throw sparks and turn the metal red hot. Managed to use excessive force to jam it through the metal to get the bracket done. I'll be returning it tomorrow, and seeking another brand for future projects. Absolutely terrible product.
    by
    Response from DiabloProductExpertMay 24, 2022
    Thank you for posting! We're especially glad you did because it sounds like your experience fell short of expectations. Please contact us and we'll sort this out together: https://www.diablotools.com/contact
      2 found this review helpful
      Used them on my Dewalt brushless circular saw on treated...
      Used them on my Dewalt brushless circular saw on treated lumber (2x6 to 2x 10 and 4x4) and they went through it like a hot knife thru butter. Very impressed with Diablo tracking point blades.
      by
      • Verified Purchase
      2 found this review helpful
      You get what you pay for - learn from me
      The blade in expensive, but you get what you pay for. I sided my 2,000 sq ft house and went through a couple of blades. At some point I used a blue blade from the other HIW store trying to save a buck and that was a mistake. It quickly dulled and started to smoke and bent. Just buy it, you will be happy with the results.
      by
      • Verified Purchase
      • Recommended
      1 found this review helpful
      The Diablo made me do it
      The 50 tooth Diablo worked better then expected. I used it to rip cut 6’ of 0.80 Aluminum the one thing I will recommend is let the blade do the job it’s designed for. Stay slow and steady on the saw.
      by
      • Verified Purchase
      • Recommended
      2 found this review helpful
      A color other then red possible?
      I cut 3/8 mill plate easily! It would be nice if it had ananother color in the middle so it looked diffent then the other diablo blades.
      by
        • Recommended
        3 found this review helpful
        Only use Diablo
        This is the first I've bought to cut through soft metals. I was installing a few closet doors and needed to cut through the rails. At first, I went slowly and that made it burn the metal. Instead, once the blade got up to full speed, I just pushed it down and it cut through. It did take some force and there was a good amount of sparks, so be careful.
        by
          • Recommended
          1 found this review helpful
          The blade was used to cut screen rail using a low cost miter saw. Neat miter cuts of the thin met...
          The blade was used to cut screen rail using a low cost miter saw. Neat miter cuts of the thin metal profiles could be attained by moving the blade very slowly through the pieces, but given the cross section of the rails they still cut quickly. Impatience caused the thin profiles to bend and left burrs.
          by
          • Verified Purchase
          • Recommended
          2 found this review helpful
          Yeah there's nothing because I cut all the bushes. The...
          Yeah there's nothing because I cut all the bushes. The blade really did the job. It cut smoothly and precise. It was like cutting butter. Great product and quality.
          by
          • Verified Purchase
          1 found this review helpful
          Showing 1-10 of 6,681 reviews