Dominate the jobsite with Diablo’s full line up of sanding solutions.
For maximum sanding performance & longer sanding life.
Universal and reusable sanding technology for up to 10x longer life vs standard sanding discs.
SandNet is reusable and specifically designed with anti-clogging technology to reduce pitch build-up, and is ideal for sanding wood, metal and plastics.
Cleaning SandNet is as easy as shaking, vacuuming or rinsing it to clear dust particles for repeated use.
Come in a variety of grits and are ideal for paint refinishing, deck surface prep and re-conditioning, floor refinishing, wood furniture building and refinishing, & project construction.
Diablo’s range includes a variety of sandpaper discs featuring a universal hole pattern, sanding belts & sheets, & cat/mouse hook & lock.
Ideal for the removal of heavy layers of finish, paint, & primer on walls, doorframes & trim on wood.
Removal & stripping of paint without damaging the under-lying surface on wood.
For moderate stock removal & sanding preparation before paint on wood, metal & plastics.
Light stock removal & final sanding preparation before paint on wood, metal & plastics.
Intercoat sanding of stain/ varnish & trim on wood, metal & plastics.
Final surface finish and intercoat final finish on wood, metal & plastics.
I would imagine the 60Grit would work well, just let the paper do the work- don't lean into it. Should take off chipped and loose paint quickly.
You will have to buy a psa to hook and loop conversion pad. It will attach to your psa sander and the other side is hook and loop so you can attach these sanding discs to it. I use only hook and loop sanding discs, and I find them to be economical and quicker to change from one grit to another. Hope this helps.
I know DIABLO makes multiple sizes of round, center whole sanding discs, some even larger than 9", but not sure about about 9" rounds per se. I think Eagle and Norton make 9" center whole discs but not sure where to purchase those brands except perhaps on line.
Hi Frank, These discs will work with any 5" ROS sander.
No. Im using them on a dewalt orbital sander that has the hook on it. They are just the basic pads.
Fabric. It works like velcro. It doesn't work very long if you are applying pressure to the sander, but these do the job.
60 or 80 grit is recommended
Hi Hutch, These ROS sanding discs use Hook and Lock backing to attach to the sander.
Hello Mike, If you're looking to scuff sand the concrete use a 40grit to 60grit sandpaper. I hope this helps. Cheers, Chris