#1 Home Improvement Retailer

Internet #100017783

Model #D0740R

Store SKU #793618

Store SO SKU #1000698623

7-1/4 in. x 40-Teeth Finish Saw Blade

  • Compatible with any 7-1/4" corded or cordless circular saw
  • Cuts hardwoods, 2x lumber, laminate, melamine, plywood & OSB
  • Hardened steel body for longer life and sharper cutting edge
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

This is an image of Diablo's "Lead Never Follow"

Diablo Saw Blades

Dominate the jobsite with Diablo circular saw blades for wood cutting applications.

This is an image of Diablo's optimized for corded or cordless saws claim.

Diablo Wood Cutting Blades

Are optimized for use in both corded & cordless saws for jobsite flexibility.

This is an image of Diablo's more cuts, less time, up to 65% more cuts per charge.

More Cuts Per Charge

Diablo circular saw blades provide you the maximum cuts per charge in cordless saws.

This is an image of a Diablo small diameter framing blade.

Circular Framing Saw Blades

Diablo’s Tracking Point Framing saw blade delivers up to 2x the durability in the most difficult cutting applications.

This is an image of a Diablo small diameter framing / demolition circular saw blade.

Circular Framing & Demolition Blades

Demo Demon saw blade withTracking Point Amped tooth geometry delivers extreme durability in abrasive materials such as shingles, bolts and nail-embedded wood.

This is an image of a Diablo small diameter finish circular saw blade.

Finish Blades

The ideal combination of cutting speed and long life. A great choice for the jobsite finish cuts in 1X, decking, fencing, fascia, OSB and stacked plywood.

This is an image of a Diablo small diameter ultra finish circular saw blade.

Ultra Finish Blades

For clean chip-free cuts with little to no sanding re-work required. Ideal for hard-woods, 2x lumber, dimensional lumber, laminate, melamine & veneered plywood.

This is an image of a nail embedded wood material application.

Ideal for

demolition & cutting wood with nails.

This is an image of hardwood material application.

Ideal for

hardwood cutting.

This is an image of lumber material application.

Ideal for

2x and dimensional lumber cutting.

This is an image of a pressure treated wood material application.

Ideal for

pressure treated wood cutting.

This is an image of OSB and plywood material application.

Ideal for

OSB and plywood cutting.

This is an image of laminate, melamine, and veneered plywood material applications.

Ideal for

laminate, melamine and veneered plywood cutting.

The advanced laser-cut slim kerf on the Diablo 7-1/4 in. x 40-Tooth Finishing Saw Blade creates a thin swath for less material removal and fast, effortless operation. Constructed with TiCo Hi-Density special-blend carbide, this durable circular saw blade is outfitted with 40 teeth to make smooth, finely finished cuts in wood and plywood. The Perma-SHIELD nonstick coating reduces drag while stabilizer vents absorb noise and vibration to keep the blade straight.
  • Laser-cut heat expansion slots foster true and straight cutting
  • Perma-SHIELD non-stick coating protects against heat, gumming and corrosion
  • TiCo high-density titanium carbide composition increases performance and maximizes cutting life
  • Fashioned with 5/8 in. laser-cut arbor for accurate blade rotation
  • Laser-cut stabilizer vents trap noise and vibration, keeping the blade straight
  • Blade won't bog down when sawing damp wood

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Saw Blade Diameter (in)
7-1/4

Details

Arbor Size
0.625 In.
Color Family
Red
Material Cut
Wood
Number in Package
1
Number of Teeth
40
Power Tool Accessory Type
Circular Saw Blade
Returnable
90-Day
Saw Blade Material
Carbide
Tools Product Type
Power Tool

Questions & Answers

27Questions40Answers

What size is the arbor?

Asked by teest March 31, 2021
3
Answers

Hi Teest! This blade is fashioned with 5/8 in. laser-cut arbor for accurate blade rotation. Thanks for the terrific question!

Can you use this blade on a Milwaukee panel cutter that came with a 8 and a quarter blade for cut...

Asked by Rick February 14, 2021
1
Answer

THEY MAKE ALL SIZES OF THIS DIABLO WOOD AND METAL CARBIDE SAW BLADE. CHECK YOUR MANUFACTURERS MANUAL AS WHAT BLADES YOU CAN USE WITH A MILWAUKEE PANEL CUTTER.

Does this blade have ATB tooth design? (Alternate top bevel)

Asked by rjs98 December 19, 2020
3
Answers

Yes, this blade is an ATB tooth design.

How does it perform on 3/4" baltic birch. Any Splintering?

Asked by lcp13 August 20, 2020
5
Answers

Hey lcp13 The best answers for Diablo tools will be found on diablotools(dot)com. The filters are awesome! Click saw blades, then click circular saw, then pick your material. Diablo is all I buy and their product selection site makes it easy.

Can I use this blade to cut Hardieboard? If not, any suggestions?

Asked by RadioactivePuma August 13, 2020
4
Answers

Personally that Diablo blade is use more for wood. Diablo D0704DH is the blade that you need for cutting Hardieboard. Brian

I'm using this with a Ryobi P508 cordless. The direction of rotation on the blade when compared w...

Asked by RadioactivePuma August 13, 2020
5
Answers

The blade can be mounted and used in whatever orientation you require. I have a saw similar to yours, blade left. Mounting the blade with printed side in does not affect the cutting.

How do you remove this blade out of the package? May sound like a silly question, but i can’t find any info on the web

Asked by JFig August 11, 2020
4
Answers

Use a pair of scissors or a sharp utility knife - cut along just inside the package edges.

Is this carbine tip

Asked by Rap May 29, 2020
5
Answers

No it’s a carbide tip.

Will this work for cutting vinyl plank flooring?

Asked by Timewarpone April 14, 2020
5
Answers

I would think so, my only concern would be if more teeth are needed to avoid chipping

will this work on a ryobi table saw

Asked by jay April 4, 2020
5
Answers

If you have at least a 7 1/4 inch saw blade I'm sure it will.

7-1/4 in. x 40-Teeth Finish Saw Blade - page 2

Customer Reviews

  • 4.7
    out of 848 reviews
  • 95% recommend this product
Filter by:
Showing 1-10 of 848 reviews
excellent blade when i was a the home Depot
purchased one these blades at same time I also purchased a Ridgid 5 price cordless combo kit. this blade had cut great ! no wobble don't bind . 5 STAR all the way!!?
by Carmine
Let 'er rip!
Hi had an old fiberglass boat that I couldn't get rid of. Couldn't even give it away! But this blade ripped thru the old hull like it was 3/8 plywood. Love it!
by MysteriousTraveler
Constructing a new deck and I used this blade to trim the ends of the composite decking. Cut like...
Constructing a new deck and I used this blade to trim the ends of the composite decking. Cut like a hot knife through butter. Perfectly clean ends with no loose or hanging materials.
by Dean
We were cutting conveyor belt material for Rubber Razors to complete a DES SOAK project for water...
We were cutting conveyor belt material for Rubber Razors to complete a DES SOAK project for water diversion. We didn't know if the belt had metal fibers or not. The blade worked well. We will continue using it on future cuts.
by HomeDepotCustomer
I absolutely love these blades. I've tried just about every brand on the market and nothing lasts...
I absolutely love these blades. I've tried just about every brand on the market and nothing lasts as long. They are extremely sharp and have great temperature resistance. I always buy them from Home Depot because they often have the double pacts. The 12inch blade I've been using on my miter saw I've had for about two years and it's still sharp and shows almost no wear. Fantastic. However, there is one drawback. They cost. A lot. The 7 1/4 blades aren't too bad, but the 10 and 12 inch blades are terrible. Quality is, however, just super. As stated above, I'm still using the 12inch after two years. I go through about one 7 1/4 blade per year, so, the price is justified. I get my money's worth. I DO highly recommend this entire family of brand blades.
by Hammer
2 people found this helpful
very good this blade, the cut is perfect in laminates, looks laser, very precise and long lasting...
very good this blade, the cut is perfect in laminates, looks laser, very precise and long lasting blade
by Alfamedic
Beware this Diablo bade, Model # D0740R, Store SKU #793618 is just slightly undersized as it meas...
Beware this Diablo bade, Model # D0740R, Store SKU #793618 is just slightly undersized as it measures approximately 7-1/8 inch in diameter rather than 7-1/4 inch as advertised on the blade and by Home Depot. This smaller diameter size does make a difference on some miter saws as they will not quite cut all the way through the stock when making 45 degree or greater angle cut with this Diablo blade installed. We followed the saw manufacturer's instructions and maxed out the depth of cut to no avail with this undersized Diablo blade installed. Even more troubling is that while visiting Home Depot on 7/9/2018, I did a quick measurement of several in-stock Diablo 7-¼ inch saw blades and found all of them to also be undersized at approximately 7-1/8 inch in diameter. If I worked for Home Depot, I would sure want someone to let me know that there was a size issue with these Diablo 7-1/4" saw blades. Home Depot, why the size discrepancy?
by JoRoWheeler
22 people found this helpful
The blade was fantastic.
The blade was fantastic.
by Tooter
I needed to cut a bedroom door and didn’t want it to splinter and this blade preformed perfectly.
I needed to cut a bedroom door and didn’t want it to splinter and this blade preformed perfectly.
by Hypster
1 person found this helpful
Great for maple butcher block! Throughly impressed with how this blade cut through 1 3/4” thick m...
Great for maple butcher block! Throughly impressed with how this blade cut through 1 3/4” thick maple butcher block. I got a sweet deal on a maple butcher block work bench top. 6ft wide by 3ft deep. Only problem was that at 3ft, the top was a little too deep to be practical in my garage. Still, I couldn’t pass up this deal. So I decided to cut it down. This meant i had to rip cut 6 inches off and wanted the cut clean enough to repurpose the piece that was cut off. I set up a fiber board with c-clamps as a guide and went to work with my 15a Milwaukee tilt-lok circular saw. The blade ate it up and asked for seconds. The results and pictures speak for the selves. No splintering or break out and not a hint of burning. Just a nice, clean, precise cut. 10/10 would buy again and would recommend for this application.
by jr
4 people found this helpful
Showing 1-10 of 848 reviews