Internet #203162379

Model #D0770F

7-1/4 in. x 70-Tooth Steel Demon Ultra Fine Ferrous Metal Cutting Saw Blade

  • Compatible with any 7 1/4" corded or cordless circular saw
  • Cuts roofing, siding, decking, corrugated sheets & steel studs
  • Up to 40x the life of standard abrasive discs
  • See More Details
($45.55 /unit)
$45.55

Frequently Bought Together

+
+
Price:
$4555

Product Overview

This is an image of Diablo's "Lead Never Follow"

Diablo Saw Blades

Dominate the jobsite with Diablo circular saw blades for wood cutting applications.

This is an image of Diablo's optimized for corded or cordless saws claim.

Diablo Wood Cutting Blades

Are optimized for use in both corded & cordless saws for jobsite flexibility.

This is an image of Diablo's more cuts, less time, up to 65% more cuts per charge.

More Cuts Per Charge

Diablo circular saw blades provide you the maximum cuts per charge in cordless saws.

This is an image of a Diablo small diameter framing blade.

Circular Framing Saw Blades

Diablo’s Tracking Point Framing saw blade delivers up to 2x the durability in the most difficult cutting applications.

This is an image of a Diablo small diameter framing / demolition circular saw blade.

Circular Framing & Demolition Blades

Demo Demon saw blade withTracking Point Amped tooth geometry delivers extreme durability in abrasive materials such as shingles, bolts and nail-embedded wood.

This is an image of a Diablo small diameter finish circular saw blade.

Finish Blades

The ideal combination of cutting speed and long life. A great choice for the jobsite finish cuts in 1X, decking, fencing, fascia, OSB and stacked plywood.

This is an image of a Diablo small diameter ultra finish circular saw blade.

Ultra Finish Blades

For clean chip-free cuts with little to no sanding re-work required. Ideal for hard-woods, 2x lumber, dimensional lumber, laminate, melamine & veneered plywood.

This is an image of a nail embedded wood material application.

Ideal for

demolition & cutting wood with nails.

This is an image of hardwood material application.

Ideal for

hardwood cutting.

This is an image of lumber material application.

Ideal for

2x and dimensional lumber cutting.

This is an image of a pressure treated wood material application.

Ideal for

pressure treated wood cutting.

This is an image of OSB and plywood material application.

Ideal for

OSB and plywood cutting.

This is an image of laminate, melamine, and veneered plywood material applications.

Ideal for

laminate, melamine and veneered plywood cutting.

Diablo's premium Steel Demon 7-1/4 in. x 70 Tooth Carbide Ferrous Metal Ultra Fine Saw Blade has teeth made of Ti-Co high density carbide with titanium for a design that withstands impact, reduces wear, and lasts longer that standard carbide in metal cutting applications. Tri-metal shock resistant brazing allows metal cutting carbide tips to withstand extreme impact for maximum durability. Non-stick Perma-Shield coating protects the blade from heat and corrosion, reduces friction and pitch buildup. Laser-cut stabilizer vents absorb noise and reduce vibration for a cleaner cut and longer life.
  • Efficiently cut through ferrous metals quickly and accurately, leaving clean, burr free cuts
  • Ideal for cutting steel studs, steel pipe, and steel sheet
  • Ideal for most mild steels under 1/8 in. thickness
  • Laser-cut stabilizer vents for reduced vibration and precise cuts
  • Durable Triple Chip Grind (TCG) tooth design for clean, chip free and long life cuts
  • Perma-shield permanent coating prevents gumming and corrosion
  • Laser-cut thin kerf design gives fast, clean cuts
  • Covered by limited lifetime warranty
  • Diameter: 7-1/4 in.
  • Teeth: 70 TCG
  • Hook angle: -5 degrees
  • Arbor: 5/8 in. diamond arbor

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Saw Blade Diameter (in)
7-1/4

Details

Arbor Size
5/8 in. Diamond Arbor
Color Family
Red
Material Cut
Metal
Number in Package
1
Number of Teeth
70
Power Tool Accessory Type
Circular Saw Blade
Returnable
180-Day
Saw Blade Material
Carbide
Tools Product Type
Power Tool

Questions & Answers

10Questions8Answers

Can this blade be used to cut a coroan countertop?

Asked by Jon October 20, 2020
0
Answers

Can this blade be used to cut 1/8" stainless steel rod and 1/4" stainless steel rod?

Asked by MakerMan August 21, 2020
0
Answers

Can this blade be used to cut 15 gauge sheet metal?

Asked by AlanR June 11, 2020
1
Answer

Hi AlanR, the 7 1/4 inch x 70T Steel Demon Ultra Fine Ferrous Metal Cutting Saw Blade (D0770F) will work great on 15ga sheet metal. - Adam M.

What is considered mild steel?

Asked by AlanR June 11, 2020
1
Answer

Alanr, thank you for your question. Mild steel would be anything that is not a hardened steel and not stainless steel. Think of materials like angle iron, black iron pipe, & conduit. Thanks, Marc H.

Can this blade be used on exotic hard woods?

Asked by PCRC51 March 28, 2020
1
Answer

PCRC51, This blade is meant for thin ferrous metals such as steel. The most ideal 7-1/4" blade for hardwoods is D0760R.

Will this work to cut my standing seam metal roofing? Will it cut clean with no kick back?

Asked by SH September 25, 2019
1
Answer

Yes, see my review submitted October 29. I used a “jig” I built that is not as wide as the panels, so I could put the panels on it - face/seams down - and saw across the panels through a notched “saw path."

Is this sawblade designed for my Skilsaw wormdrive saw? It looks to me that the rotation is in th...

Asked by rcph June 30, 2019
1
Answer

Yes! Remember, one can turn blades over to change its rotation (the center notch comes out) - I used my Skilsaw worm drive magnesium saw; I installed the blade with the label in (unlabeled side out). And, the Skilsaw’s RPMs are within the Diablo’s recommended RPM range.

Will this work well on repeated cuts to a 6" steel purlin 14gauge?

Asked by JR December 5, 2018
1
Answer

Hi JR, The Diablo 7-1/4" 48T blade will work great for repeated cuts on 14 gauge steel. -Brady M.

What blade would i use to cut through 1/4" mild steel plate?

Asked by jb1 November 15, 2016
1
Answer

Jb1 D0748F is designed to cut up to 1/4" mild ferrous metal.

can i use this blade on a chop saw

Asked by tracks September 30, 2015
1
Answer

Technically, it will fit, but this blade is designed for use in a circular saw.

7-1/4 in. x 70-Tooth Steel Demon Ultra Fine Ferrous Metal Cutting Saw Blade - page 2

Customer Reviews

  • 8 Customer Reviews
  • 5 out of 5 stars overall
100% of customers recommended.
Overall Ratings
5star-icon(8)
4star-icon(0)
3star-icon(0)
2star-icon(0)
1star-icon(0)
Sort By:
Makes cutting r panel no longer “work”. Fast, efficient and easy.
Makes cutting r panel no longer “work”. Fast, efficient and easy.
Was this helpful?
0
0
The Diablo 7-1/4 in. Steel Demon Ultra Fine Metal Cutting Blade works very well for cutting thin ...
The Diablo 7-1/4 in. Steel Demon Ultra Fine Metal Cutting Blade works very well for cutting thin metal. Used it to slice up some old metal roofing to build a raised garden bed and as other reviewers have said, it cuts like a hot knife through butter. Very happy with the blade, make sure you wear leather gloves and a face mask.
Was this helpful?
1
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
I purchased this blade to cut the corrugated metal that...
I purchased this blade to cut the corrugated metal that I was using in my outdoor kitchen. It blazed through the metal like cutting though butter. This is my first diablo blade that I purchased and own. I bought this blade based upon the reviews. If I ever need another blade, it'll be a diablo!
Was this helpful?
1
0
I mounted the blade on a Skilsaw worm drive magnesium saw to cut some spare 24 gauge (not 26 gaug...
I mounted the blade on a Skilsaw worm drive magnesium saw to cut some spare 24 gauge (not 26 gauge) commercial/industrial metal roofing like what is installed on my house, garage, and garden shed. After the destructive snow storm of Feb/Mar 2019 - when my standby generator wouldn’t start - I decided to build a shelter for the generator, which is hard-wired and behind the garage. I wanted the roofing to match up with the seamed roofing on the garage - and relatively smooth cuts were desired. I also built a small wooden setup to place the 16’ roof panels on to measure and cut them. While one wouldn’t want to run a finger down the cut metal edges after sawing (I quickly filed, sanded and painted the edges [with the spray can of matching paint the contractor gave me] to mitigate rusting]), the cuts were straight and surprisingly ‘clean’ - and the blade cut relatively easy. *Observe basic safety rules for sawing, and use a transparent face protector to guard against micro bits of sawn metal*
Was this helpful?
1
0
This blade was amazing for roofing steel!
This blade was amazing for roofing steel!
Was this helpful?
1
0
The Diablo Steel Demon cut my roofing steel like butter,...
The Diablo Steel Demon cut my roofing steel like butter, with virtually no burred edges. I hihhly recommend it.
Was this helpful?
1
0
Great product!
Cuts great. Looks like a factory cut. Would recommend to anybody
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers