Internet #205040340

Model #DS0906CWX

Store SKU #1000049075

Store SO SKU #1000990992

9 in. 5/7-TPI Carbide-Tipped Demo Demon Nail-Embedded Wood Cutting Reciprocating Saw Blade

  • Compatible with all corded and cordless reciprocating saws
  • Carbide Demo Demon blade ideal for nail-embedded wood cutting
  • Carbide teeth for 50x longer life vs. standard bi-metal blades
  • See More Details

Frequently Bought Together

+
+
Price:
$1064

Product Overview

This is an image of Diablo's reciprocating saw blades, cuts more.

Diablo Carbide Reciprocating Saw Blades

Ultimate cutting performance, greater durability & superior life in both wood and metal cutting applications allowing you to cut more on the jobsite.

This is an image of Diablo's cut more, do more, save more.

A Carbide Reciprocating Blade for Every Application

Do more on the jobsite with Diablo’s full range of Carbide Reciprocating Blades for wood and metal.

This is an image of save more, one Diablo blade has up to 50x longer life vs standard bi-metal blades.

Diablo Carbide Reciprocating Saw Blades

Provide up to 50x longer life vs standard bi-metal blades.

This is an image of pruning and clean wood material applications.

Pruning & Fast Clean Wood Carbide Blades

Ideal for use in pruning & clean wood applications.

This is an image of nail-embedded wood material application.

Nail-Embedded Wood Carbide Blades

Ideal for use in clean wood & nail-embedded wood.

This is an image of Diablo's metal and general purpose material applications.

General Purpose Carbide Blades

Ideal for use in clean wood, nail-embedded wood, metal 3/32”-1/4”, plastics, angle & tubing.

This is an image of stainless steel, cast iron pipes, and other metal material applications.

Metal Carbide Reciprocating Blades

Ideal for use in stainless steel, cast iron pipe, pipe, high-strength alloys, stainless sheet, sheet steel, copper, angle & tubing.

This is an image of a Diablo 9" carbide pruning and clean wood reciprocating saw blade.

Pruning & Fast Clean Wood Carbide Blades

The 3 TPI design has large blade gullets for easy and fast chip removal.

This is an image of a Diablo carbide 9" nail embedded wood reciprocating saw blade.

Nail-Embedded Wood & Reciprocating Blades

5/7 blade variable tooth design provides faster cuts with less vibration in nail-embedded wood.

This is an image of Diablo's 9" Carbide general purpose reciprocating saw blade.

General Purpose Carbide Reciprocating Blade

Unique plunge tip design with 6/9 TPI enables faster and easier plunging in wood. Also cuts metal from 1/8”–3/8”.

This is an image of a Diablo 9" thick metal carbide reciprocating saw blade.

Thick Metal Carbide Blades 3/16”- 9/16” Thickness

8 TPI features enhanced carbide tip to blade connection for extreme impact resistance.

This is an image of a Diablo 9" Carbide medium metal reciprocating saw blade.

Medium Metal Blades 1/16” - 1/8” Thickness

10 TPI tooth geometry for clean/ smooth finishes on medium metal applications.

This is an image of Diablo 9" and 6" thin metal carbide reciprocating saw blades

Thin Metal Blades - Less than 1/8” Thickness

20 TPI for greater durability and cutting performance in thin metal.

DIABLO's next generation of Demo Demon Carbide-tipped reciprocating blades with new Variable Tooth Design are specifically designed for maximum performance in nail-embedded wood. This high performance carbide-tipped blade delivers unmatched 50X longer cutting life than bi-metal blades in nail-embedded wood. DIABLOs patented variable tooth technology provides faster cuts with less vibration.
  • High-performance carbide for greater durability and cutting performance
  • Enhanced carbide tip to blade connection for extreme impact resistance
  • Unique plunge tip design enables faster and easier plunging
  • 1 in. oversized blade body for straighter cuts with less vibration
  • Perma-Shield non-stick coating for less heat and friction
  • Ideal for nail-embedded wood
  • Red reciprocating blades are a registered trademark of Freud America, Inc.

Specifications

Dimensions

Blade Length (in.)
9
Blade Width (in.)
1"

Details

Color Family
Red
Demolition
Yes
Material Cut
Wood
Number in Package
1
Number of Teeth
67
Power Tool Accessory Type
Reciprocating Saw Blade
Returnable
180-Day
Saw Blade Material
Carbide
Teeth Per Inch
0.7
Tools Product Type
Power Tool

Questions & Answers

4Questions13Answers

Can this blade be used in the Porter Cable PCC670 cordless reciprocating saw with 20V battery?

Asked by GrandmotherJ June 8, 2020
1
Answer

All blades are the same and can be used in any recip saw.

Product picture and Diablo's website show this part number to be a 5/7 tpi, but here it's listed as 6/9 t. Which is it?

Asked by JP December 30, 2018
3
Answers

Not sure what the part number is since I'm not a Home Depot employee, maybe you should ask an associate...

Will this a Milwaukee sawsall

Asked by Steve June 2, 2018
4
Answers

No, Porter-Cable, "Tiger Saw" old one still works great.

Will this blade fit my Ryobi Sawsall?

Asked by SolarGuy January 25, 2016
5
Answers

they come in different types I would say YES

Customer Reviews

  • 375 Customer Reviews
  • 4.6 out of 5 stars overall
95% of customers recommended.
Overall Ratings
5star-icon(302)
4star-icon(42)
3star-icon(11)
2star-icon(8)
1star-icon(12)
Sort By:
I was using this blade to cut railroad ties. It worked wonderful, smooth cut. I cut 11 ties prob...
I was using this blade to cut railroad ties. It worked wonderful, smooth cut. I cut 11 ties probably make 30 cuts. Many the last 2 cuts were a little slower but still a clean, straight cuts. I then ran 4-10' rebar to pin it down.
Was this helpful?
2
0
Honaunau Hawaii
Blade doesn’t bend, keeps cut straight.
Customer review from diablotools.com logo
Cut some slots in 4x6 for air conditioner tubing worked great also cut off studs in frame work.
Was this helpful?
0
0
My standard blades lasted far longer
Really disappointed by these blades. Used them to cut up some pallets and withing the first pallet the carbide teeth started breaking off and by the end of the second pallet nearly all of the teeth in the center of the blade were gone. I had just finished cutting up 6 pallets with one standard none carbide tooth blade without losing any teeth and other than losing some speed on my cuts the blade was still doing its job, two pallets in on the carbide blade and its out of service. I think I will stick with the cheaper standard blades from now on.
Was this helpful?
1
0
Response from DiabloProductExpertApril 19, 2018
Hi Mike, I regret to hear this reciprocating saw blade did not meet your expectations. So I can better understand the issue, please feel free to contact me at mhenderson@freudtools.com. Thank you, Marc H.
Poplar Grove, IL
My standard blades lasted far longer
Customer review from diablotools.com logo
Really disappointed by these blades. Used them to cut up some pallets and withing the first pallet the carbide teeth started breaking off and by the end of the second pallet nearly all of the teeth in the center of the blade were gone. I had just finished cutting up 6 pallets with one standard none carbide tooth blade without losing any teeth and other than losing some speed on my cuts the blade was still doing its job, two pallets in on the carbide blade and its out of service. I think I will stick with the cheaper standard blades from now on.
Was this helpful?
0
0
This blade cut through plaster walls and 2x4 studs with nails in a straight line with no hesitati...
This blade cut through plaster walls and 2x4 studs with nails in a straight line with no hesitation. Great product!
Was this helpful?
1
0
DEMOLITION MAN'S BLADE
Quality :
4
Value :
4
Seeds Program Review
(What's this)
This is the definitive demolition blade that will cut through wood, wire, nails, metal, screws, pipe, just about anything. Nothing gets in its way. Cuts clean and cool. Stands up well to jab error bends without breaking. Can be mounted right side up or down for pull cuts. This blade will make short work of cutting through whatever you want. Thought the carbide tips could have stayed sharp longer but I did ask a lot of the blade.
Was this helpful?
2
0
Woodruff, SC
Store special with a good price
Quality :
5
Value :
5
I purchased this blade to cut out the window and door openings in a new building I was putting up. The blade was long enough to extend beyond the 2x4's and cutout the OSB sheathing with no problems. It worked well for my application and I expect it will a lot more work before I wear it out.
Was this helpful?
0
0
Great blade and smooth cut!!!
I am a woodworker who enjoys harvesting my own lumber and milling it on the tablesaw. Lately I have found a few white oak trees that have fallen and are about 6" in diameter. I have been holding out on the reciprocating saw. Been using a bow pruning saw and muscle power. Though it's a great work out, the speed isn't very cost effective. I'm on a low budget and the pruning saw worked for a while. So for my first experience with the recip and this blade I am now a believer. I wouldn't say my time perfecting my milling methods was waisted. I would say the blade and new saw speed up the process. The blade, though not the fastest, cut right through the 6" white oak logs just fine. Left behind a smooth cut in the end grain. Perfect for a surface to seal and let the log dry for a week or two before milling. Mind the logs had fallen before the summer at least and had dried some already this year if not last year too. I did accidentally run in into the dirt a couple times. Still sharp and cut great. With a little in and out action, the saw dust cleared just fine too. Otherwise it does bog slightly if you don't clear the dust frequently. Highly recommend it.
Was this helpful?
2
0
Fine cut
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I purposely got this 9 in. x 6/9 TPI Diablo Demo Demon Next Gen Carbide-Tipped Reciprocating Blade for Nail-Embedded Wood, not for cutting wood with nails, but for cutting branches off trees for the purpose of an easier method of pruning. This blade worked well, in fact it cut up to 5" log, with blade to spare. Cutting was a little slower than a chain saw, but with out all the fuss and noise of a chain saw. Great for pruning that occasional broken tree limb. Please take notice of the fine smooth cut. I think this would be great for craft persons making projects from tree branches.
Was this helpful?
4
0
Wow! What a Blade!
Quality :
5
Value :
4
Excellent cutting with this blade... Although I pulled all the nails I could see I just wanted to be sure I could complete the task. It is long wearing & works very well. Has stayed sharp even after cutting 6x8 oak timbers & the blade metal is strong. I dinged on value coz they are pricey however the turn out to be worth it... I used it in a Ryobi One+ Saws All & it did the trick!
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers