#1 Home Improvement Retailer

Internet # 313022304

Model # DAG1900-S3

Store SKU # 1005310883

High Speed Steel Auger Drill Bit Set (3-Piece)

$36.97
Apply Now
Pay $11.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Use in corded or cordless impact & drill drivers
  • Use to drill in clean & nail-embedded wood
  • Deep flutes for enhanced chip removal & more holes per charge
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
This is an image of Diablo's SPEEDEMON spade bits and self feed bits.

Diablo Wood Boring

Diablo’s SPEEDEMON spade bits & self-feed bits deliver speed, ease of use, & more holes per charge when using cordless drills and drilling in clean wood.

This is an image of Diablo's "Lead Never Follow"

Diablo Leading the Way in Wood Boring

Diablo offers a full range of wood boring accessories from spade bits, auger bits, installer bits and self feed bits.

This is an image of a Diablo auger bit.

Diablo Durable and Smooth Auger Bits

Diablo’s auger bits deliver exceptional durability & smooth drilling in nail-embedded wood.

This is an image of a Diablo spade bit.

Up to 10x Faster Spade Bits

The speed tip design & curved paddles deliver up to 10x faster holes than a standard chisel point and allows for more holes per charge when using a cordless drill.

This is an image of Diablo's Self Feed Bit with Aggressive Tip.

Self-Feed Bits with Aggressive Tip

Diablo self-feed bits include a unique 2 cutter design & an aggressive screw tip for more holes per charge.

This is an image of a Diablo ultra sharp installer bit.

Ultra-Sharp Tip Installer Bits

Maximizes durability for fast, straight holes in clean wood or stacked lumber.

This is an image of a Diablo auger bit with a dura tip.

Auger Bits with Dura-Tip

Self feeding tip delivers extreme durability in wood with nails.

This is an image of a clean wood material application.

Ideal for Clean Wood

SPEEDEMON spade bits, self-feed bits & installer bits are ideal for drilling in clean wood.

This is an image of a Diablo 1/4" shank impact strong.

1/4” Shank

SPEEDEMON spade bits are impact strong and can be used with impact drivers or drills/ drivers.

This is an image of a Diablo self feed bit range.

Self-Feed Bit Range

Self-feed bits ranging from 1-1/8” - 3-5/8” sizes are ideal for boring large holes for pipes, cables, and ductwork.

This is an image of an installer bit.

Installer Bits with Optimized Flute Design

Small hole in flute for effortless feeding of wires and cables through walls, ceilings, and floors.

This is an image of a Diablo woodboring drill bit.

Ideal for Nail-Embedded Wood

Are ideal for use in nail-embedded wood.

This is an image of a Diablo woodboring drill bit.

Dual Cutting Edge Design

Two cutting edges provide effortless, smooth hole drilling in nail-embedded wood.

About This Product

DIABLO's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. The self-feeding Dura-Tip pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. 3-piece set includes the following sizes - 5/8 in, 3/4 in & 1 in.

Highlights

  • Dura-tip for extreme durability in nail-embedded wood
  • Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
  • Smooth drilling in wood with nails
  • 3-piece set for up to 30% savings
  • Return Policy

Product Information

Internet # 313022304

Model # DAG1900-S3

Store SKU # 1005310883

Additional Resources

Shop All DIABLO

Specifications

Drilling Depth (in): 6

Dimensions

Drilling Depth (in)6

Details

Auger Bit TypeLong Auger BitBit MaterialHigh Carbon Steel
Drill Bit TypeAuger BitDrill Bit Type(s) IncludedAuger Bit
FeaturesSelf-FeedingIndividual/SetSet
Material ApplicationWoodNumber of Pieces2-4 Pieces
Number of Pieces3Returnable90-Day
Shank StyleHexTools Product TypePower Tool

Questions & Answers

4Questions
caret
Q:What sizes are the bits?
by|May 18, 2023
1 Answer
Answer This Question

A:  Hi James! The set includes a 5/8 in. x 7-1/2 in. Auger Bit, 3/4 in. x 7-1/2 in. Auger Bit, & a 1 in. x 7-1/2 in. Auger Bit! If you have any further questions, please call 800-334-4107 or email customerservice@diablotools.com. We're here to help!

by|Sep 20, 2023
    1 found this answer helpful
    caret
    Q:Is this a ship bit?
    by|May 5, 2023
    0 Answer
    Answer This Question
    caret
    Q:Is the chuck 7/16?
    by|Aug 3, 2020
    2 Answers
    Answer This Question

    A:  Hi John, yes it is.

    by|Oct 15, 2021

      A:  You are correct. Per Diablo: 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers. https://www.diablotools.com/products/DAG1900-S3

      by|Jan 23, 2024
      1 found this answer helpful
      caret
      Q:What are the dimensions of the product?
      by|Jul 9, 2020
      3 Answers
      Answer This Question

      A:  The dimensions of this are Product Depth (in.) 1.22 in Product Height (in.) 10.04 in Product Width (in.) 6.1 in

      by|Oct 22, 2020
        1 found this answer helpful

        A:  Here are the Diablo specs: https://www.diablotools.com/products/DAG1900-S3

        by|Aug 25, 2021
        1 found this answer helpful

        A:  Hi Mike, The diameters included in this set are 5/8 in., 3/4 in., & 1 in.

        by|Sep 20, 2023
          16 found this answer helpful
          Showing 1-4 of 4

          Customer Reviews

          4.8 out of 5

          • 4.8 out of 129 reviews
          • 94% recommend this product
          Filter by:
          Showing 1-10 of 129 reviews
          I bought this set because these bits looked like they would make quick work of the 3/4" bench dog holes I needed. Plus I've used plenty of other Diablo parts in the past. All just fine. My first use was on a piece of plywood. The pilot worked great, but the leading sharp points of the auger broke off. Not expecting that! Consequently it wasn't drilling anything after that. I'd like to take them back...
          by
          • Verified Purchase
          These bits are very sharp. They drill wood very quickly and cleanly. I used all three in some scr...
          These bits are very sharp. They drill wood very quickly and cleanly. I used all three in some scrap wood and you have to be careful when they grab they grab. They cut cleanly with very little break out on the other side. I was a little concerned when I got the bit out and seen the hex end but it chucked up in the drill just right. The length is nice to reach through multiple layers of 2 by.
          by
          • Recommended
          This is a pretty unique design. I have some short auger spade bits which I really like. There are times where pushing the bit difficult, and the auger really does a good job of pulling it through. The short bits are convenient when attached to a right-angle drill, as you can drill header plates with limited clearance. These bits are kind of a combination. They have an auger tip, then a short section like a spade bit, and then the final edge 1/8” edge or so is then a twist bit. This results in a cleaner exit hole. See photo showing a typical auger bit with a spade type cutter (bottom hole) vs the cleaner hole on top. Often when using a spade bit, I’ll drill through from both sides, when there is sufficient room, in order to keep the exit hole clean. These bits feed fast, which means it takes a lot of drill power. The pitch on the auger is more aggressive than some other auger bits I have. If you are using a cordless drill, it definitely needs to be fully charged, and even then, some drills may not have enough power. The shank of the drill bits have a large octagon shank, which is a nice feature. Guarantees no slip, even when using a keyless drill chuck. However, it does require a ½” chuck. The size is identified on a recessed portion of the bit. Bits are made in China.
          by
          • Recommended
          This Diablo High Carbon Steel Auger Bit Set (3-Piece) has a place. I took them into the woodshop...
          This Diablo High Carbon Steel Auger Bit Set (3-Piece) has a place. I took them into the woodshop and played a bit. I tried them in my 18v cordless drill, my 20v cordless drill, my corded drill, my drill press, and, don’t laugh, my brace. These were probably never meant for a drill press and trying them out on ¾” hickory wasn’t the best of ideas. Just so you know, I routinely split the hickory. For whatever reason, a clamped piece of 5/8” cherry from the farm proved to be too much for both the corded and cordless drills with a 5/8” auger bit inserted. Both stalled. As to the brace? Wow, it sent the bit through that same piece of cherry like it was cutting butter. The Auger Bits worked well in the brace no matter what crazy job I attempted. When I tried the Auger Bits on some 2”X4”’s (treated and untreated) the Augers really showed their stuff. No challenge, and way faster than any spade bit I’ve ever used. No matter what tool, the Auger Bits turned out hole after hole easily and quickly. The Augers performed very well when they were doing what they were designed to do. Did not have any wood with nails in it to try them out on but I’m sure that will happen soon enough. Nice to know the Bits will be able to take it. I really like the design of these. They work much better than spade bits and the hex shank provides for a meaningful grip by the chuck. The threaded tip is aggressive in getting the cut started and then the auger does the rest. They are massively heavy duty yet just the right size for making holes once inserted in the drill. Inserted in my DeWalt 20v XR Max drill, the length from the tip of the Auger to the back of the handle was under 13 1/2”. As to the brand, every tool that I own that has a blade has a Diablo blade installed. So, for me there’s confidence there. This is a nice, serious set of Auger Bits that is ready, willing, and able to do the job.
          by
          • Recommended
          This is a set of auger bits that have a very specific function. If you need to hog out a big hole...
          This is a set of auger bits that have a very specific function. If you need to hog out a big hole in a 2x4 or bigger for conduit, piping or anything else up to 1 inch this will make really short work of the job. It has a special tip for centering and for helping with existing nails or screws. This is for rough work. Do not expect a clean hole when you are done. You also need to have a good grip on your drill. This bit uses all of the torque your drill puts out. Do not use these with a cheap drill either. You might risk damage due to the torque requirements. These bits are beastly. Overall, highly recommended.
          by
          • Recommended
          This is a high quality auger set that will take care of most of your boring needs. I use it for r...
          This is a high quality auger set that will take care of most of your boring needs. I use it for running electrical and PEX plumbing. The smaller sized bits are just right for electrical and drill faster. The hex chuck area is a real benefit because there is no slipping, especially on key-less chucks. The self-feeding auger screw at the front has coarse threads so it pulls strongly in soft framing lumber like Pine or Fir. The coated flutes help the shavings feed out of the hole and reduce clogging and jamming. These are a great set for you tool bag.
          by
          • Recommended
          I have been testing the Diablo 3-piece Auger Bit Set this week. The set includes a 5/8', a 3/4",...
          I have been testing the Diablo 3-piece Auger Bit Set this week. The set includes a 5/8', a 3/4", and a 1" sized bit. I have mixed feelings about the product. They are very aggressive in boring holes, including nail imbedded wood. There is a high torque effect as one is drilling. First recommendation is to use a slow speed heavy duty 1/2" drill that enables a 2 hand grip. The drill will have a tendency to twist in one's hands so a firm grip is necessary. Secondly, ,make sure the screw tip is in direct contact with the material when you begin drilling. The tip will immediately penetrate the material and pull itself through. I think the product would be ideal for electricians who must drill multiple holes in studs to run wiring. I would caution using them in an overhead application due to the torque effect. Quality wise, I feel they are extremely durable and should provide long lasting service.
          by
          • Recommended
          The DIABLO High Carbon Steel Auger Bit Set (3-Piece) will make a handy addition to our selection ...
          The DIABLO High Carbon Steel Auger Bit Set (3-Piece) will make a handy addition to our selection of drill bits. They arrived well packaged. The unique shoulder to the drill bit allows it to cut the nails that you will encounter while working with the different woods that you encounter while remodeling houses. They are short enough to allow you to get between the joists without too much trouble. As brand new, they drill very well. Time will tell how they perform drilling through nails and the occasional screw. Down the road, as they get worn, I will find out how easy they are to resharpen the bits, as you will eventually hit a hardened nail or screw that will knock the edge off. But as a good brand name, I am confident that they will perform well.
          by
          • Recommended
          My 12 inch mitre saw and all of my circular saws are using Freud America Diablo brand blades beca...
          My 12 inch mitre saw and all of my circular saws are using Freud America Diablo brand blades because their performance is superior to all other blades in this price range. Since wood construction and renovations are always ongoing, I decided to try this 3-piece auger bit set. At the moment, I only needed one inch size bit. However, the three-piece set comes with a lower price per bit than buying each individually. The self-feeding tips insure that the bit will not stray from the desired location. These bits are sharp. The manufacturer states that it would be okay to drill in nail-embedded wood. These bits leave a fairly clean surface at the exit side of the hole.
          by
          • Recommended
          I always find the Diablo brand to be high quality material. My usual experience is with their cir...
          I always find the Diablo brand to be high quality material. My usual experience is with their circular saw blades, which are excellent. This three piece auger drill bit set is excellent quality, also. Large flutes, a lead-in screw to pull the bit through the wood, hex shank for easy drill chuck grip, etc. We used them to remodel a bathroom, mainly drilling studs and joists for 1/2" copper pipe. They produce nice clean and straight holes.The flutes do a good job of keeping the debris clear of the drilling. Do be aware that the flutes are very sharp, don't handle them casually.
          by
          • Recommended
          Showing 1-10 of 129 reviews