PERGOBlade 10 in. x 12-Tooth Polycrystalline Diamond (PCD) Tipped Ultimate Flooring Circular Saw Blade
$84.97
Pay $59.97 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Use with 10" miter saw, slide miter saw or table saw
- Cuts Pergo & laminate flooring, bamboo, hard & softwoods
- 75x the cutting performance vs standard carbide tipped blade
- View More Details
Product Details
Diablo’s Hardie Blade Circular Saw Blades
The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade
Diablo’s Trex Blade Circular Saw Blades
Diablo’s TrexBlade is the only blade recommended for composite decking materials by the Trex Company.
Diablo Pergo Blade Saw Blades
Diablo’s PergoBlades are the only blades approved by the Pergo brand for cutting their material.
Optimized for Corded and Cordless Saws
All Diablo Hardie, Pergo and Trex blades are optimized for use on corded or cordless saws
Over 75x Longer Life
Diablo’s Hardie and Pergo Blades deliver over 75x longer life vs. standard carbide blades
Polycrystalline Diamond (PCD) Tooth
Diablo’s Hardie and Pergo Blades feature Polycrystaline Diamond (PCD) Tooth geometry which delivers unmatched cutting life
TiCo Hi-Density Carbide
Diablo’s Trex Blade features TiCo Hi-Density Carbide to maximize cutting life in composite decking materials and plastics
Hardie Blade Fiber Cement Circular Saw Blades
Available in 5”, 6-1/2”, 7-1/4”, 10” and 12”
Hardie Blades Ideal for Cutting
All Fiber Cement Products
Pergo Laminate Flooring Circular Saw Blades
Available in 7-1/4”, 10” and 12”
Pergo Blades Ideal for Cutting
Pergo Flooring, Laminate Flooring, Bamboo, Hardwoods and Softwoods
Trex Composite Materials/Plastics Circular Saw Blades
Available in 7-1/4”, 10” and 12”
Trex Blades Ideal for Cutting
Composite Decking and Cellular PVC
Specially designed for cutting flooring, the 10 in. x 72-Tooth Diablo PergoBlade features new laser-cut stabilizer vents for precise and clean cuts in a variety laminate and wood materials. The advanced stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through your material cleanly, quickly and accurately. The Polycrystalline Diamond-tipped tooth geometry provides for exceptional durability in cutting highly abrasive materials. Engineered to outlast ordinary carbide-tipped blades by 75X, this saw blade effortlessly cuts through laminate planks to create finely honed edges without burnout. Also suitable for cutting bamboo, hardwood and engineered flooring, the Perma-SHIELD non-stick coating on this blade reduces drag so there is minimal friction and heat buildup.
- Polycrystalline Diamond (PCD) teeth with unique tooth geometry delivers over 75 times longer cutting life
- High-tech anti-kickback design re-enforces the tooth for longer life
- Laser-cut anti-vibration design reduces vibration and stabilizes the blade
- New advanced laser-cut stabilizer vents absord noise and vibration, and prevent sideways movement for precise, clean cuts
- Perma-SHIELD non-stick coating reduces drag and shields the blade against heat and friction
- Ideal for cutting flooring materials such as laminate, hardwood, engineered flooring, bamboo and wood
- Approved by the Pergo brand for cutting their flooring material
- For use with miter, slide miter and table saws
- Stands up to heavy-duty use for large project installs
- Red saw blades are a registered trademark of Freud America, Inc.
- Return Policy
Specifications
Questions & Answers
24Questions
Q:Just tried this blade on pergo defense+ w/ 10" new blade on a table saw & it struggled through the cuts, tearing more than cutting it seemed. Does the pergo need to be face down? if not, this is going to be the biggest waste of money.
by|Sep 3, 2023
0 Answer
Q:Does anyone have any recommendations on which blade do you recommend for cutting Lifeproof Vinyl Floor Planks from Home Depot? Can you please provide diameter, number of teeth, and/or the item #? Is the Pergo one best?
by|Jul 4, 2022
0 Answer
Q:can I use this blade for generalized rip cuts on a table saw? How about cross cuts on a table ...
by|Apr 11, 2021
4 Answers
Q:Can you use this blade to cut 3/16 inch Lexan?
by|Apr 20, 2020
1 Answer
Showing 1-4 of 24
5
169
4
10
3
3
2
1
1
4
Mar 17, 2023
Well worth the money.
I purchased the saw blade so I could put down 46 boxes of Pergo flooring. It cut my flooring perfectly it also cut my trim perfectly well worth the money.
by
Dec 26, 2020
Don’t use on bamboo engineered flooring
Took it back after three test cuts using a brand new DeWalt miter saw. Even when going slow on bamboo engineered flooring it rips and jars the fibers from the board. Yes I waited until the motor was at nominal speed. For $99 bucks I expect a clean cut
by
Response from DiabloProductExpertMay 24, 2021
Thank you very much for the thoughtful feedback! We'd love an opportunity to help with this. Please contact us and we'll get started right away: call 800-334-4107 or email customerservice@diablotools.com. We look forward to speaking with you!
Jun 2, 2020
Great purchase installed 45 boxes of 1/2” laminate. Blade still looks brand new no chipping burni...
Great purchase installed 45 boxes of 1/2” laminate. Blade still looks brand new no chipping burning or paint transfer from the blade.
by
Jan 2, 2020
I used this blade to install 270 sq ft of Pergo Outlast flooring in my Basement. It made a clean ...
I used this blade to install 270 sq ft of Pergo Outlast flooring in my Basement. It made a clean cut, even with the padding on the back of the Pergo. A much better option than a board cutter ( I tried that first). Used it to cut laminate moulding as well.
by
Apr 16, 2019
Not hype. This blade was used to install Pergo on about 1000 sq. ft of flooring. It held up well ...
Not hype. This blade was used to install Pergo on about 1000 sq. ft of flooring. It held up well and is still sharp.
by
Aug 7, 2018
Best blade ever using it to cut solid bamboo flooring. This blade cuts thru the flooring effortle...
Best blade ever using it to cut solid bamboo flooring. This blade cuts thru the flooring effortlessly, no chipping. I will be putting this type of blade on my other saws.
.
by
Apr 25, 2018
Blade cut like butter from the first to the last cut through pergo outlast+. Very impressed. Burn...
Blade cut like butter from the first to the last cut through pergo outlast+. Very impressed. Burned up a normal saw blade previously on a different install and ended up buying a new blade. Worth the money to buy a specific blade for the application.
by
Mar 27, 2015
Simply Fantastic!
I’ve had this blade for a while, but I am only now starting my current laminate floor installation, and have a chance to share my opinion. In the past I was using an 84 tooth Diablo 10” blade, and although it provided smooth cuts, it required a lot of downward saw pressure on my chop saw to make the cuts, often resulting in some minor “burn” on the edges of the laminate.
I tried this blade for the first time today, and WOW – what a noticeable difference. Yes, it’s a cliché often used by others, but I can think of no better phrase than that it cuts like a hot knife through butter.
Because it zips through the laminate so easily, It is tempting to move the saw quickly through the stock, but doing so seems to result in tiny chipping at the edges. Taking a slow pass through the laminate completely avoids chipping, resulting in a finely honed edge (see picture).
Can't say how long it will last, since I just started using it, but I love this blade right out of the box! Only wish that I had it before I started my last laminate flooring job. So glad I’ve got it now for the 2000 SF of Pergo XP that I'm putting down now.
by
Feb 11, 2015
Good blade
This blade is really sharp and cuts through things really well.
by
Jan 4, 2015
Super Clean Cuts
I was a little skeptical about a 12-tooth 10" saw blade, but Diablo makes good stuff, so I guess they know what they're doing. Sure enough, this thing cuts through laminate like a hot knife though butter. No tearout or chipping at all, and I was getting the same cut quality at the start of my project as I was a the end of it.
I only did one 130 sq. ft. room with an AC-4 rated 8mm laminate, so I can't really testify to the 75x longer cutting life that Diablo claims. However, I certainly didn't notice any degradation in cut quality for the 24' of rip cuts I made.
One side note: the whole blade is coated in Diablo's red permashield coating. It stays on the whole blade for cut after cut, but the first few will leave red marks on the cut surface as the coating wears off the cutting teeth. Not a big deal though, since no one will ever see the ends of the laminate boards.
If you've got a 10" miter saw and a 10" table saw, you could even get by with just this one blade. Rip cuts are only needed on the first and last rows, and for the first row you can crosscut the last piece on the table saw before changing out the blade.
If you've got a laminate flooring project in your future, this blade is definitely worth picking up!
by
0/0
Explore More on homedepot.com