#1 Home Improvement Retailer

Internet #

310016301

Model #

D055030FMX

Store SKU #

1004497566

Steel Demon 5-1/2 in. x 30-Tooth Metal Cutting Circular Saw Blade with Bushings

$36.87
Apply Now
Pay $11.87 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Ideal with cordless arbor saws for clean cuts on all mild steels
  • Includes 3 bushings to fit 1/2 in., 5/8 in., 10 and 20 mm saws
  • TiCo Hi-Density Carbide for 40x longer life than standard blades
  • View More Details
Store
0 in stock
caret

Product Details

Diablos Steel Demon metal cutting saw blades produce fast, accurate cuts in mild steels without bogging down your cordless saws battery. This 20 mm arbor saw blade includes 3 additional bushings that allow your blade to also fit on 1/2 in., 5/8 in. or 10 mm arbor saws. These blades feature Diablo made TiCo Hi-Density Carbide engineered exclusively to deliver up to 40 times longer life when compared to 1 standard bonded abrasive disc in mild steel applications. Designed with a Triple Chip Grind (TCG), the blades carbide teeth produce clean, burr-free finishes, virtually eliminating any type of rework. The thin kerf body minimizes material removal and requires less cutting power, delivering fast, clean cuts.
  • Diablo made TiCo hi-density carbide specifically designed for mild steel applications to provide maximum performance, durability and up to 40X longer life
  • Durable Triple Chip Grind (TCG) tooth design for clean, burr-free cuts for virtually no rework
  • Tri-metal shock resistant brazing allows metal cutting carbide tips to withstand extreme impact for maximum durability
  • Advanced laser cut thin kerf blade gives extremely fast, effortless cuts in cordless saws
  • Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
  • Non-stick Perma-Shield coating reduces gumming, rusting and corrosion
  • Optimized for 1/2 in., 5/8 in., 10 mm and 20 mm cordless saws
  • Compatible with: DeWalt (20 mm arbor), Makita (5/8 arbor), Black and Decker (1/2 arbor), Ryobi (10 mm arbor), Porter Cable (10 mm arbor) and Craftsman (10 mm arbor)
  • Ideal for mild steels with 1/8 maximum wall thickness: steel studs, angle iron, channel, flat bar, EMT conduit
  • Ideal for mild steels, such as threaded rod, with 1 maximum diameter
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

308Questions
caret
Q:What is the difference between the D0518x (Store SKU #451622) 18-tooth fast framing blade and the D055018WMX (Store SKU #1004497548) 18-tooth fast framing blade?
by|May 31, 2023
0 Answer
Answer This Question
caret
Q:What is the size of the arbor?
by|May 24, 2023
0 Answer
Answer This Question
caret
Q:Do you sell a arbor adapter for this blade to fit a 10 mm arbor saw
by|May 21, 2023
0 Answer
Answer This Question
caret
Q:Does it cut well for 25 ga roofing panels ?
by|May 20, 2023
1 Answer
Answer This Question

A:  Yup like butter.

by|May 21, 2023
    Showing 1-4 of 308
    caret

    Customer Reviews

    4.7 out of 5
    (6,533)
    • 4.7
      out of 6,533 reviews
    • 94% recommend this product
    Filter by:
    Showing 1-10 of 6,533 reviews
    Great blade for finer woodwork. I used this blade for...
    Great blade for finer woodwork. I used this blade for initial rip cuts for a table top. The extra teeth gave a cleaner cut and also discharged sawdust very well.
    by
    • Verified Purchase
    Cuts aluminum nicely
    I had to shorten an automatic dog door frame. Purchased this blade at Home Depot and installed on my miter saw. Did a couple of test cut, then cut frame where needed. Was rectangle 2” by 3” aluminum tubing. This blade cut a smooth surface and worked well for the project. I have had great service from all Diablo blades I have used.
    by
    • Verified Purchase
    • Recommended
    36 tooth game changer. Cut plaster wall
    This is one of the most versatile blades given the teeth count. I have cut hardwood floor and subflooring with it as I was installing a bathroom shower kit. Then I needed to cut part of the Plaster/concrete wall because of needing to install more sheet rock to get the shower to be in right. All I did was draw my line in the same cut over 22' of concrete plaster with no problems and still went back to cutting wood. I bought another one to replace it as by the end of the demo it was pretty well shocked but I've never had another blade go near this far. The main thing is the 36 tooth is a big game changer and yes it's set up for mild steel if you'll look at how the carbide is set into the blade it's not like your regular blade.
    by
    • Verified Purchase
    • Recommended
    Cuts thinner aluminum Diamond Plate like butter. But best to...
    Cuts thinner aluminum Diamond Plate like butter. But best to cut from smooth backside because the circular saw gets caught on the actual raised diamond plate. Also make sure to cut as close as possible to work table to eliminate vibrations of the plate being cut.
    by
    • Verified Purchase
    2 found this review helpful
    Used them on my Dewalt brushless circular saw on treated...
    Used them on my Dewalt brushless circular saw on treated lumber (2x6 to 2x 10 and 4x4) and they went through it like a hot knife thru butter. Very impressed with Diablo tracking point blades.
    by
    • Verified Purchase
    3 found this review helpful
    You get what you pay for - learn from me
    The blade in expensive, but you get what you pay for. I sided my 2,000 sq ft house and went through a couple of blades. At some point I used a blue blade from the other HIW store trying to save a buck and that was a mistake. It quickly dulled and started to smoke and bent. Just buy it, you will be happy with the results.
    by
    • Verified Purchase
    • Recommended
    2 found this review helpful
    The Diablo made me do it
    The 50 tooth Diablo worked better then expected. I used it to rip cut 6’ of 0.80 Aluminum the one thing I will recommend is let the blade do the job it’s designed for. Stay slow and steady on the saw.
    by
    • Verified Purchase
    • Recommended
    3 found this review helpful
    A color other then red possible?
    I cut 3/8 mill plate easily! It would be nice if it had ananother color in the middle so it looked diffent then the other diablo blades.
    by
      • Recommended
      4 found this review helpful
      Yeah there's nothing because I cut all the bushes. The...
      Yeah there's nothing because I cut all the bushes. The blade really did the job. It cut smoothly and precise. It was like cutting butter. Great product and quality.
      by
      • Verified Purchase
      2 found this review helpful
      For the price and durability there are none better! Diablo for me ! Highly recommended!
      For the price and durability there are none better! Diablo for me ! Highly recommended!
      by
      • Verified Purchase
      • Recommended
      1 found this review helpful
      Showing 1-10 of 6,533 reviews

      Frequently Bought Together

      Top Rated
      +
      +
      Price:
      $3687