Internet #206438193

Model #DSR

Store SKU #1001633331

Store SO SKU #531677

Sprinkler Riser-Drip Conversion Kit

  • Ideal for converting a riser to 2-way compression connection
  • Plastic construction is UV-resistant
  • Set includes adapter, pressure regulator, and swivel tee
  • See More Details

Frequently Bought Together

+
+
Price:
$997

Product Overview

The 1/2 in. FPT x 0.700 O.D. compression tee Sprinkler Riser to Drip Conversion Kit model DSR is used to convert a 1/2 in. sprinkler riser into a low flow drip irrigation zone. The DSR includes a 1/2 in. conversion adapter, a 25 psi preset pressure regulator, and a 0.700 O.D. swivel tee to start a drip irrigation system for a landscape plantings or lawn replacement from any 1/2 in. sprinkler riser. Constructed of molded ultraviolet-resistant high impact plastic, the Sprinkler Riser to Drip Conversion Kit allows a 1/2 in. sprinkler riser to serve as the point of connection from the 1/2 in. riser to 1/2 in. drip line or drip tubing. The 25 psi pressure regulator reduces the outgoing pressure, providing protection to the zone.
  • Converts a 1/2 in. male pipe thread riser to a 2-ways 0.700 O.D. compression connection; allows the start of a drip irrigation zone from any sprinkler riser; reduces incoming water pressure to the ideal working pressure for a drip system
  • Simple and easy solution for starting a drip irrigation system; provides flexibility in converting a 1/2 in. riser into a drip irrigation zone in a few steps; secure and easy installation of drip line or drip tubing without glue or clamps
  • Tee’s black insert fits all drip line or polyethylene drip tubing with 0.670 O.D., 0.700 O.D., and 0.704 O.D., high-strength plastic construction with UV protection for durability and long life
  • Kit includes: one 1/2 in. adapter, one 25 psi pressure regulator, and 1 swivel tee with 60 mesh screen
  • Maximum operating pressure: up to 100 psi, flow rate: up to 5 GPM; outlet preset pressure: 25 psi
  • Outlet 0.700 O.D. compression tee fits drip line and poly tubing with 0.690 O.D., 0.700 O.D., and 0.704 O.D.; screen: 60 mesh, temperature range: up to 130°F, materials: high impact plastic with UV protection

Compare Similar Drip Irrigation Kits

current product
Sprinkler Riser-Drip Conversion Kit
Drip Zone Faucet Connection Kit with a 2-Way SplitterDrip and Soaker Vegetable Watering KitLandscape Drip Watering Kit
BrandDIGDIGDIGDIG
NameSprinkler Riser-Drip Conversion KitDrip Zone Faucet Connection Kit with a 2-Way SplitterDrip and Soaker Vegetable Watering KitLandscape Drip Watering Kit
Price
$997
$1208
$1992
$2497
Ratings
(31)
(14)
(19)
(8)
IncludedPressure RegulatorBackflow Preventer,Pressure RegulatorBackflow Preventer,TubingPressure Regulator,Tubing,Tubing Clips
Kit TypeDrip Riser KitsDrip Hose Bib Kits,Drip Irrigation KitDrip Hose Bib Kits,Drip Irrigation KitDrip Hose Bib Kits,Drip Irrigation Kit
View ProductView ProductView ProductView Product

Specifications

Details

Color Family
Blacks
Included
Pressure Regulator
Irrigation System Component
Kit
Kit Type
Drip Riser Kits
Number of pieces included
3
Pack Size
1
Package Quantity
1
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
3 year warranty

Questions & Answers

7Questions24Answers

Can the kit be at soil level and cover with mulch?

Asked by JVW October 5, 2020
3
Answers

I don't see a problem with it as long as you don't bury it in soil. It has a filter in it, so you'll probably want to clean it out occasionally, but I would think it should be OK under mulch.

Why does the Product Overview list 1/2" FHT x 0.7 OD when it is supposed to connect to a 1/2" ris...

Asked by RM September 25, 2020
2
Answers

You are correct this is a type-o it should read ½” FPT or FNPT. Thank you for bringing this to our attention.

3 YEAR WARRANTY - via HD or DIG? Installed two of these conversion kits 07/19. Nice kits. Ran one...

Asked by LoveToGarden May 11, 2020
1
Answer

Thank you for including the photos, the conversion elbow and pressure regulator in the photos show signs of over tightening which would defiantly cause the crack and the broken threads. We recommend only hand tightening the pressure regulator onto the conversion elbow. Now the 3 year warranty is serviced directly through us, when you have a moment please give our Technical service department a call to start the warranty process 1-800-344-1172.

How do you cap off one side if you only need to run one length of tubing?

Asked by JC September 5, 2018
5
Answers

Use a short section of 0.700 OD drip tubing with a cap fitting.

Once I retrofit one zone of my sprinkler with this drip conversion kit (I know I have to cap off ...

Asked by sk February 9, 2018
4
Answers

No snow here.

Will this work with a Hunter PGP pop-up sprinkler?

Asked by FlbrkMike June 5, 2016
4
Answers

This connects to the riser, not the sprinkler head. Hunter PGP's use 3/4" risers, while the DIG conversion kit requires a 1/2" riser. After removing the sprinkler head, you'll need a 3/4" to 1/2" adapter for the correct connection, and a 1/2" cut-off riser.

if i run the drip line off this riser will it effect the other srinkler heads in this zone?

Asked by jim1234 April 27, 2016
5
Answers

Not sure, but recommend separate zones for 2 watering schedules. Drips usually require longer durations. It includes its own pressure regulator, so it may work fine.

Customer Reviews

  • 31 Customer Reviews
  • 4.7 out of 5 stars overall
90% of customers recommended.
Overall Ratings
5star-icon(24)
4star-icon(6)
3star-icon(0)
2star-icon(0)
1star-icon(1)
Sort By:
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
If it comes with an "o" ring located at the...
If it comes with an "o" ring located at the riser connector it will avoid water leak from that part of the connection.
Was this helpful?
0
0
Easy to install, works as expected. Hopefully it lasts in this high heat.
Easy to install, works as expected. Hopefully it lasts in this high heat.
Was this helpful?
0
0
Was this helpful?
0
0
I like it. It’s simple to install and effective....
I like it. It’s simple to install and effective.
Was this helpful?
0
0
I went with this product when I converted to drip because I wanted a lower profile than the Rainb...
I went with this product when I converted to drip because I wanted a lower profile than the Rainbird product. This was easy to install and was far less visible. In fact I just covered it with landscape fabric and then a light layer of soil so you don't see it at all, yet I can still easily reach it should the filter screen need cleaning or the pressure regulator need replacing. The filter is just a simple screen so unless you have clean water (we do) you may need a more serious filter. I'm only in two months but everything is working perfectly. I plan to buy this again soon when I do another conversion in our back yard.
Was this helpful?
0
0
Sets up flush to the ground.
Sets up flush to the ground.
Was this helpful?
0
0
Worked great...
Worked great
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
It work like a charm. ...
It work like a charm.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers