
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Decorates and waterproofs masonry walls. An economical masonry water proofer. Mixes easily with water. Prevents water penetration of masonry surfaces, interior, exterior, above or below grade.
Container Size | 3 Gallon |
|---|---|
Coverage Area (sq. ft.) | 210 sq ft |
Application | Concrete Waterproofer/Sealer |
|---|---|
Application Method | Brush, Roller |
Base Material | Other |
Color Family | White |
Color/Finish | White / Flat |
Dry To Touch Time (hh:mm) | 04:00 |
Finish Family | Flat |
Interior/Exterior | Exterior, Interior |
Maximum hydrostatic pressure (lb.) | 10 |
Maximum Optimal Temperature (F) | 90 |
Minimum Optimal Temperature (F) | 50 |
Number per Package | 1 |
Paint/Stain Features | Low Odor, Textured |
Recommended Number of Coats | 2 |
Returnable | 90-Day |
Substrate/Surface Material Use | Brick, Concrete, Stone |
Surface Location | Basement, Basement Wall, Garage Wall |
Transparency | Solid |
Vertical/Horizontal | Vertical |
MIXING Add 2 pints of cold water for each 10 pounds (7 pints per 35 pound container) of DRYLOK® Powdered Basement & Masonry Waterproofer. Stir until mixture is free of lumps. Thin with an additional 2 pints (950mL) of water for normal application or 11/2 pints (700mL) of water for heavy application. Stir until smooth. Wait for 15 minutes, restir and apply. Use the same proportions of water and DRYLOK® Powdered Basement & Masonry Waterproofer in succeeding mixes to ensure a uniform color tone. Mix no more material than can be used in 3 to 4 hours. You can see the rest of the information at https://images.thdstatic.com/catalog/pdfImages/2a/2a11b57f-11dd-4dae-95bd-aa8b04efded4.pdf
TLW22 - Not sure what you mean by early - Give us a call at 1-800-845-5227.
danm - Please allow 30 days before applying any latex based products. You can review the full Product Data Sheet at this link: https://images.thdstatic.com/catalog/pdfImages/2a/2a11b57f-11dd-4dae-95bd-aa8b04efded4.pdf
Ezra - No, the surface needs to be clean and dry of all contaminants.
Sorry - This product is for application to masonry surfaces only.
Nolan - Powdered DRYLOK® Waterproofer is not for use on floors. For floors subject to foot traffic, we recommend using DRYLOK® Floor & Wall Waterproofer. See it here: https://www.homedepot.com/p/DRYLOK-1-gal-Clear-Interior-Exterior-Floor-and-Wall-Basement-and-Masonry-Waterproofer-20913/205079075
Carolyn - Yes. DRYLOK Powdered Waterproofer is one option for your leakage. DRYLOK® Original, Extreme, and HD-9000 are all ready-mixed waterproofers that may be easier to use as they are ready-mixed in the can. Give us a call to discuss your options at 1-800-845-5227.
Shoshik - Applying DRYLOK® over a masonry substrate that is not structurally sound is not advised. Perhaps I am not fully understanding your situation, I suggest calling our Technical Service at 1-800-272-3235 to discuss your project in greater detail. Thanks for choosing DRYLOK®
Viewing 1-8 of 26
4.4 out of 5