|Product Depth (in.)||13 in||Product Height (in.)||16 in|
|Product Length (in.)||13 in|
|Drying Time (hours)||Less than 10 minutes||Features||Fast Setting, High-Strength, Hydraulic Cement, Paintable|
|Interior/Exterior||Exterior, Interior||Product Weight (lb.)||50 lb|
|Recommended Application||Cement, Concrete, Masonry, Mortar, Stucco||Repair Type||Anchoring, Crack Filler, Patch, Sealant|
|Returnable||90-Day||Use Location||Columns, Floor, Foundation, General Purpose, Wall|
A: Shiva - No problem at all. DRYLOK® Fast Plug must be mixed in small batches due to the fast-setting nature of the product. Doing your project over several days will not be an issue. Thank you for choosing DRYLOK®
A: Darren - That is not an application for DRYLOK® Fast Plug. It's not designed as a surface coating, it's designed for application in holes or cracks. Applying in the manner you are asking about will be a failure.
A: We suggest waiting 7 days before applying latex based coatings such as DRYLOK® Waterproofer. If you need a quicker application, you can apply DRYLOK® Wet Wall Primer once the ph level is 13 or below.
A: HDSS- Our DRYLOK Fast Plug will cover approximately 16 cubic inches of patching material per pound. Actual coverage will vary depending upon application method, surface texture, and porosity. Link to our technical data sheet: https://d2w8l4nyjr77a0.cloudfront.net/resources/Product-Data-Sheets/drylok-fast-plug-pds.pdf