#1 Home Improvement Retailer

Internet #314756021

Model #28915

Store SKU #1005785096

WETLOOK 5 gal. Clear High Gloss Penetrating Sealer

$16054
Apply Now
Save up to $100 on your qualifying purchase.
Apply for a Home Depot Consumer Card
  • High-gloss finish with SALTLOK® Technology
  • Ideal for concrete driveways, sidewalks, patio, brick, slate
  • Can be used over DRYLOK® Concrete Floor Paint or E-1 Epoxy
  • View More Details
Store
0 in stock
Text to Me

Frequently Bought Together

++
Price:
$16054

Product Overview

Just like natural and man-made stone, concrete and masonry are porous materials that will start to break down, dust, pit, crack, and/or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. DRYLOK WetLook Clear High Gloss Penetrating Sealer is a non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high gloss, wet look finish is desired. DRYLOK WetLook Clear High Gloss Penetrating Sealer is a premium quality finish that protects and beautifies stucco, brick, bare or painted concrete, pavers, stamped concrete, and exposed aggregate, as well as natural and artificial stone.
  • Our highest level of moisture vapor barrier protection (25% solids)
  • Resists de-icing salts
  • Interior/exterior
  • Use on bare masonry or previously painted surfaces
  • SaltLok technology helps prevent the leaching of minerals and salt
  • Coverage: 200-400 sq. ft. per gallon depending on porosity
  • Application tools: brush, pad applicator, garden sprayer, squeegee
  • Dry time: 1 hour
  • Coats: 1 is recommended, 2 maximum
  • Recoat time: 4 hours
  • Easy cleanup with warm, soapy water
  • Online price includes PaintCare fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI, VT, WA
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Concrete Sealers

Best SellerExtreme 5 gal. Bright White Flat Latex Interior/Exterior Basement and Masonry Waterproofer
current product
WETLOOK 5 gal. Clear High Gloss Penetrating Sealer
5 gal. SC25 Siliconate Water Repellent Sealer for Concrete and Masonry5 gal. Wet Look Water Base Sealer
BrandDRYLOKDRYLOKFoundation ArmorGlaze 'N Seal
NameExtreme 5 gal. Bright White Flat Latex Interior/Exterior Basement and Masonry WaterprooferWETLOOK 5 gal. Clear High Gloss Penetrating Sealer5 gal. SC25 Siliconate Water Repellent Sealer for Concrete and Masonry5 gal. Wet Look Water Base Sealer
Price
$15100
$16054
$19999
/pail
$20999
Ratings
(677)
(16)
(99)
(35)
Container Size5 Gallon5 Gallon5 Gallon5 Gallon
TransparencySolidClearClearClear
Surface LocationBasement Wall,Exterior Wall,Garage Wall,PoolBasement Floor,Driveway,Exterior Wall,Garage Floor,Patio,Pavers,Pool DeckDriveway,Patio,PoolBasement Floor,Basement Wall,Driveway,Exterior Wall,Garage Floor,Garage Wall,Patio,Pavers
Paint/Stain FeaturesMildew Resistant,Mold Resistant,Tintable,UV/Fade ResistantAbrasion Resistant,Chemical Resistant,Dries Clear,Driveable Surface,Durable,High Foot Traffic,Moisture Resistant,Prevents hot tire pickup,Sealer,UV/Fade ResistantDries Clear,Inverted spray ability,Mildew Resistant,Moisture Resistant,Skid Resistant,UV/Fade Resistant,WaterproofDries Clear,Mildew Resistant,Moisture Resistant,Stain Resistant,UV/Fade Resistant,Washable,Waterproof
Base MaterialAcrylicAcrylicWater BasedAcrylic
Stain & Sealer In OneNoNoNoNo
Substrate/Surface Usage TypeBrick,Concrete,Stone,StuccoBrick,Concrete,StoneBrick,Concrete,StoneBrick,Concrete,Stone
View ProductView ProductView ProductView Product

Specifications

Dimensions

Container Size
5 Gallon
Coverage Area (sq. ft.)
2000 ft²

Details

Application Method
Brush,Pad,Paint Sprayer,Roller,Squeegee
Base Material
Acrylic
Coating Product Category
Waterproofer/Sealer
Color/Finish
Clear High Gloss
Dry To Touch Time (hh:mm)
01:00
Interior/Exterior
Exterior,Interior
Maximum hydrostatic pressure (lb.)
0
Maximum Optimal Temperature (F)
90
Minimum Optimal Temperature (F)
50
Number per Package
1
Paint/Stain Features
Abrasion Resistant,Chemical Resistant,Dries Clear,Driveable Surface,Durable,High Foot Traffic,Moisture Resistant,Prevents hot tire pickup,Sealer,UV/Fade Resistant
Paint/Stain/Waterproofer Product Type
Concrete Waterproofer/Sealer
Recommended Number of Coats
1
Returnable
90-Day
Stain & Sealer In One
No
Substrate/Surface Usage Type
Brick,Concrete,Stone
Surface Location
Basement Floor,Driveway,Exterior Wall,Garage Floor,Patio,Pavers,Pool Deck
Transparency
Clear
Vertical/Horizontal
Vertical / Horizontal

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3.7
    out of 16 reviews
  • 80% recommend this product
Filter by:
Showing 1-10 of 16 reviews
Incredible Shine!
Drylok Wetlook sealer brought out the shine from my tiles. I bought two cans but one can finished the job. I used the sealer on my front veranda and it looks like new. It has a nice shine and gloss that is not slippery when you walk. I highly recommend it to everyone!
by
Response from UGL Customer CareAug 11, 2021
Thank you Sasha - we'd love for you to share a photo of your completed project. wtuckerugl
    • Recommended
    Happy with it
    I used two coats of this to seal Drylok concrete paint. Out of the can, this has a fairly high gloss. I cut the sheen down by adding 1 cup of Flood Floetrol to the gallon. It cut the gloss down to a nice Satin. Seems pretty tough. So far I'm happy with the Drylok concrete paint and this product.
    by
    • Verified Purchase
    • Recommended
    Excellent product. Once application is complete it has a nice...
    Excellent product. Once application is complete it has a nice look to it.
    by
      No, I had to pressure wash it up. I was...
      No, I had to pressure wash it up. I was told that my concrete pad was too smooth and didn't allow the sealer to penetrate. Money down the drain. I was really disappointed because I had search the internet a lot to get what I wanted a sealer to do. I choose another product to finish my pad. I use an epoxy paint. After several phone calls I was informed that I needed to etch the concrete. I never thought that a concrete surface was too smooth, because I really wanted a smooth surface for my carport. I did etch the pad in order to paint the epoxy on. Hard to recommend because of I missed the instructions about etching before using it. The instructions on the can also says it can be applied to a painted surface.....hmmm?
      by
      Response from UGL Customer CareSep 23, 2021
      John - As a follow up to your discussions with our technical service department, I would like to address a few things you have mentioned in your review. The instructions on the label do address the need to acid etch bare masonry before applying the product and you mentioned that you mis-read them. If you had etched the bare masonry prior to application of our product, you would not have had to powerwash and apply the epoxy system. Surface preparation is the primary key to success with all painting projects, not just this product. Virtually every product designed for use on a concrete floor especially when subject to vehicle traffic requires an acid etch to create a profile for the coating to adhere to. If you didn't acid etch your concrete pad, you would experience the same failure with your epoxy system. As far as applying to smooth concrete vs a previously painted surface, those are two very different situations. Applying to bare concrete that is not porous is not the same as applying a resin based product to another resin based product. We also mention if using on a previously painted surface to test in a small area first for compatibility. The acid etching process not only provides a profile for the coating to adhere, it also opens the pores to allow the coating to penetrate and create an even stronger bond. That is critical for the initial coat. Application of subsequent coats adhere to the prior. (resin to resin) wtuckerugl
        Worked better than I expected for the price, will definitely...
        Worked better than I expected for the price, will definitely recommend the product.
        by
          Not glossy enough, more like satin or eggshell finish. Easy...
          Not glossy enough, more like satin or eggshell finish. Easy to work with.
          by
          Response from UGL Customer CareJul 14, 2021
          AJ - Thank you for the review. Final sheen of these type coatings is highly dependent on the porosity of the surface it is applied to. Porous surfaces will require additional coats to build the sheen. wtuckerugl
          • Verified Purchase
          Was not even close to product I used last time....
          Was not even close to product I used last time. Disappointed.
          by
          Response from UGL Customer CareJul 9, 2021
          Randall - This product has not been modified or changed. The one variable that can affect the sheen is the porosity of the substrate. Non-porous surfaces will develop a high gloss sheen with one coat, porous surfaces will require additional coats. Super porous surfaces such as brick pavers will require multiple applications and will never reach the sheen level that would be achieved on a surface such as slate. If you could follow up with us on your project we would appreciate the opportunity to discuss. You can reach us at 1-800-272-3235 or ugllabs@ugl.com wtuckerugl
          • Verified Purchase
          I really wouldn't call it high gloss. But, the product...
          I really wouldn't call it high gloss. But, the product covered well it will serve our purposes.
          by
          Response from UGL Customer CareJul 2, 2021
          Lisette - Surface porosity will determine the sheen level you will acheive. If the surface is not porous, one application will produce a high gloss finish. An example of a non-porous surface would slate. (stone) If the surface is porous, apply additional applications of the WetLook Sealer to achieve the desired gloss level. If you have any additional questions, feel free to contact us 1-800-272-3235 or ugllabs@ugl.com wtuckerugl
          • Verified Purchase
          It really brought out the color on my landscape curbing and put it nice shine on it too
          It really brought out the color on my landscape curbing and put it nice shine on it too
          by
          • Verified Purchase
          • Recommended
          product did not produce the wet look. followed instructions and nothing changed. disappointed lo...
          product did not produce the wet look. followed instructions and nothing changed. disappointed looking for something else to do
          by
          Response from UGL Customer CareJun 24, 2021
          Kw - Sorry you were disappointed. A few questions, what surface did you apply the product on? What was the porosity of the surface? How many coats were applied? Did you thin the product? Surface porosity is the main factor that will determine final sheen. If you applied on slate (non-porous) you will see a high gloss sheen in as little as one coat, but applying one coat on porous surfaces such as concrete pavers will yield less sheen until additional coats are applied. The more porous the surface, the more applications needed. If you have only applied one coat, please apply one more. If you thinned the product, then additional applications will be needed since thinning the product will not build at the same rate as un-thinned. Give us a call and we can answer any other questions or concerns you may have. 1-800-272-3235. wtuckerugl
          • Verified Purchase
          • Recommended
          1 person found this helpful
          Showing 1-10 of 16 reviews