Model # 37-071

Internet #205112293

Delta 12 Amp 6 in. Corded Jointer
0847962004772

Delta

12 Amp 6 in. Corded Jointer

  • Durable cast iron construction increases weight and stability
  • Precision-machining of the table and fence ensures accuracy
  • Heavy duty, cast iron fence support system for accurate jointing
$ 349 00 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Durable cast iron construction increases weight and stability
  • Precision-machining of the table and fence ensures accuracy
  • Heavy duty, cast iron fence support system for accurate jointing
The Delta 6 in. Corded Jointer comes with a pair of push blocks for easily and safely moving material through the jointer. It features a built-in dust blower that ejects chips efficiently and virtually eliminates clogged dust chutes and also includes an aluminum cutter head with two knives. The simple jackscrew arrangement offers easy adjustment when changing knives.
  • Durable cast-iron construction increases weight, providing stability and reducing vibration
  • Precision-machining of table and fence ensures long-term accuracy
  • Heavy-duty, cast-iron fence support system for accurate jointing
  • Simple fence adjust system with adjustable positive stops at 90°s and 45 degrees in and out
  • 5-year warranty

Product Overview

  • Durable cast iron construction increases weight and stability
  • Precision-machining of the table and fence ensures accuracy
  • Heavy duty, cast iron fence support system for accurate jointing
Model #: 37-071
Internet #: 205112293

The Delta 6 in. Corded Jointer comes with a pair of push blocks for easily and safely moving material through the jointer. It features a built-in dust blower that ejects chips efficiently and virtually eliminates clogged dust chutes and also includes an aluminum cutter head with two knives. The simple jackscrew arrangement offers easy adjustment when changing knives.

  • Durable cast-iron construction increases weight, providing stability and reducing vibration
  • Precision-machining of table and fence ensures long-term accuracy
  • Heavy-duty, cast-iron fence support system for accurate jointing
  • Simple fence adjust system with adjustable positive stops at 90°s and 45 degrees in and out
  • 5-year warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
33.66
Product Height (in.)
12
Product Width (in.)
15.74

Details

Adjustable Depth Stops
Yes
Amperage (amps)
12
Bench & Stationary Tool Type
Jointer
Bench or Stationary
Bench
Color Family
Multi-Colored
Condition
New
Depth Adjustment
Yes
Depth Measurement System
Yes
Dust collection type
Port
Lockout Power Switch
Yes
Maximum Speed (rpm)
10000
PT Horsepower (Hp)
1-1/2
Product Weight (lb.)
76lb
Returnable
90-Day
Tools Product Type
Power Tool
Voltage (volts)
120

Warranty / Certifications

Certifications and Listings
1-UL Listed
Manufacturer Warranty
5 Year

Specifications

Dimensions

Product Depth (in.)
33.66
Product Height (in.)
12
Product Width (in.)
15.74

Details

Adjustable Depth Stops
Yes
Amperage (amps)
12
Bench & Stationary Tool Type
Jointer
Bench or Stationary
Bench
Color Family
Multi-Colored
Condition
New
Depth Adjustment
Yes
Depth Measurement System
Yes
Dust collection type
Port
Lockout Power Switch
Yes
Maximum Speed (rpm)
10000
PT Horsepower (Hp)
1-1/2
Product Weight (lb.)
76lb
Returnable
90-Day
Tools Product Type
Power Tool
Voltage (volts)
120

Warranty / Certifications

Certifications and Listings
1-UL Listed
Manufacturer Warranty
5 Year

Questions & Answers

how easy is it to change blades on jointer

how easy is it to change blades on the delta jointer 37-071
Asked by: hoho
I read elsewhere that an owner used his impact tool and impact hex tools to remove those hex screws. He said it was easy. Replaced an adjusted the blades and he was done.
Answered by: David
Date published: 2018-10-31

How many speeds does it have?

Asked by: MontyZ
Two: On-running, off- not running
Answered by: 83foxtrot
Date published: 2018-08-28

Where can I buy this product ?

Asked by: Andy
If your local home depot doesnt stock this, like mine didnt. Then you have to order it online and pick up in store,like i did. Or you could order online and have shipped to your house if you pay for shipping.
Answered by: as300zx27
Date published: 2018-08-28

Is the red swivle pressure "thingy" easily removeable, and quick to put back on?

Considering removing fence, building into table saw wing (save space and extend table surface for jointer) and using table saw dence as the fence. I would need to remove the red part so i could use table saw when jointer is not in use
Asked by: CuriousGeorge
There is no easy way to remove it that I can see without disassembling something. You could lift the guard out by simply pulling upwards on my previous jointer. This one appears to be fixed. I had to use a clamp to hold it open when I adjusted the cutter height.
Answered by: rgoers
Date published: 2018-10-31
  • y_2018, m_12, d_12, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_205112293, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • QUESTIONS, PRODUCT

Customer Reviews

12 Amp 6 in. Corded Jointer is rated 3.5 out of 5 by 8.
Rated 4 out of 5 by from Unpacked and found the exhaust connection on the jointer was in crumbles in the box. Although it ... Unpacked and found the exhaust connection on the jointer was in crumbles in the box. Although it was well packed, it still had damage. But, I assembled the exhaust connector to it the best I can and it will suffice. I'm not sending back for this as it is usable in all other respects. This jointer will accommodate my needs.
Date published: 2018-01-10
Rated 5 out of 5 by from Bought this to replace a 300# floor model I had to leave behind when I moved 10 years ago. I hav... Bought this to replace a 300# floor model I had to leave behind when I moved 10 years ago. I have needed something for years, but couldn't afford to replace my previous one with like equipment. I found this Delta unit at a VERY good Christmas price and so I bought it. Despite the damaged packing (inner box only) the tool arrived undamaged. Assembly was quite easy and only took a few minutes. I did have to reset the blade depth, as the blades were slightly proud from the factory. I read one review where an individual destroyed the blade screws because they were "too tight" so I went into this expecting issues. Rather than bend up the factory wrench, I decided to use the right tool for the job... my Milwaukee M12 impact driver with a proper size impact hex bit. The screws came out easy-peasy. No muss. No fuss. It's amazing the difference the right tool makes! Got the blades adjusted to specs and tightened everything down. The next issue people seem to be having is dealing with the adjusting levers. I have read where people actually CUT an inch or more off the lever handles. Apparently they don't understand they are spring-loaded, and pulling on them disengages the 'clutch' mechanism and allows for realigning the lever for better torque. Duh! I did have to make an adjustment to the fence 90 degree stop, as it was not true from the factory. There IS an adjusting screw that allows the stop to be adjusted, but that adjustment was not covered in the instructions anywhere I could find. Nonetheless, it's pretty straight forward. There's a nut and a notched screw. Turn them until you get 90 degrees, and then lock the nut down. Simple! As for the 45 degree 'stop'... um, well, there isn't an adjustable one and I don't trust the way the 45 degree tilt works on this thing. I don't and won't use it anyway, so no problem there. The only thing I can find that was a major fail on this unit is the dust collection port. It's 2 3/8" OD. Standard shop vac hoses are 2 1/2" OD. There's simply no way to get the 2 hoses to mate. I tried a standard vac hose coupling, and it wouldn't fit. I've spend a considerable amount of time searching for something that will work, and I'm sure I'll eventually solve the problem... but come on? How hard would it have been to make the port compatible with the standard shop vac hose that millions of people already own? As for operation... the unit is surprisingly quiet, and does an excellent job on everything I've run through it so far. All in all, this is a great jointer. It's very solid and quite heavy. I'm quite pleased with it, especially considering it cost under $275.
Date published: 2017-12-31
Rated 4 out of 5 by from UPDATE: ... Someone asked about changing the blades.. After a few months of using the jointer co... UPDATE: ... Someone asked about changing the blades.. After a few months of using the jointer continuously, it struggled when I tried to square some very hard sycamore. Time to change or hone the blades I thought…. But undoing the screws to remove the factory set blades was absolutely impossible. They were torqued so tightly that they were impossible to unscrew. The hex wrench that comes with the jointer was useless. It just bent, and I ended up rounding off the tip. Other hex wrenches I had either destroyed the screw head or the wrench so I decide to call Delta tech support. They were not much help…. suggesting to hit the screw head hard with a screwdriver. In the end they gave me a number for a local Delta authorized repair shop. The service guy insisted that it would be $60 just to look at it and to remove the screws, $30 more to install and reset new blades…..- Delta said it would be covered under warranty. Apparently this is a common problem. In the end I used a screw-extractor set from Home Depot and replaced the screws with Phillips head S/S 3/4” machine screws. I replaced the blades with new ones and honed the originals using a jig and various grades of wet/dry sandpaper - ending up with 2000 grit. The jointer is working great again and I’m very impressed with it. But be warned that changing the blades for the first time is a huge pain.
Date published: 2017-09-26
Rated 4 out of 5 by from I received this jointer as a gift. On assembly, the rough casting finishes and overall appearance... I received this jointer as a gift. On assembly, the rough casting finishes and overall appearance gave me the impression of inferiority. Trying to put it together and going through the manual, my suspicions grew worse. The assembly instructions are not well illustrated or written - pointing you to wrong diagrams and missing some information. Wrong sized Hex screws are illustrated. After wrestling with the fence assembly I tried to adjust the fence to exactly 90º to the table. This was not easy as the fence locking assembly is difficult to use to say the least. But I got there in the end and tightened it as much as I dared. A few test pieces later though, I changed my mind about how good this jointer is. The results were quite impressive! I used a 10" length of plain old standard Doug. Fir 2 x 4 . I took about 1/16 " off all sides to make it square and true with very clean cuts... Quite impressive. The trick is to spend the time to set the fence *exactly* 90º. I don't think I'm going to move mine any time soon as it's perfect where it is! So - for just over $300 and about the cheapest jointer on the market, it's not that bad. It's a pain to put together and adjust, but its capable of producing some very good results.
Date published: 2017-02-16
Rated 2 out of 5 by from "Jointer arrived damaged; outfeed had a puncture at the end of the table. The screw hole in the ... "Jointer arrived damaged; outfeed had a puncture at the end of the table. The screw hole in the dowel clamp for the handle was drilled to overlap with the slot in the rear fence support such that the handle would not seat into the dowel clamp. The manual specifies certain screw sizes in the contents description, but specifies different screw sizes (i.e. not listed in the content description) when describing the assembly. Did no get far enough to assemble to try it out, but saw enough to deem the jointer inferior in manufacturing to return and purchase a different jointer.
Date published: 2016-11-30
Rated 4 out of 5 by from great little jointer It works great, easy to set up. Have only had it for a month but use it daily with no problems.
Date published: 2016-01-16
Rated 4 out of 5 by from Great Bench Top Jointer This jointer is very nice for a bench top jointer. I has a full cast iron top and fence which give the tool lots of weight (which makes it hard to move around if needed). It is very stable when it runs and has plenty of power. There is very little snipe once properly set up. I am very happy to own this in my small woodworking shop!
Date published: 2015-12-10
Rated 1 out of 5 by from Delta awful service Awful. Missing parts. Good customer service on Home Depots dnd but delta did not care about the customer. Would not recommend
Date published: 2014-11-12
  • y_2018, m_12, d_12, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_, sid_205112293, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • REVIEWS, PRODUCT