Internet #205112175

Model #36-L352

3 HP Left Tilt Unisaw Table Saw with 52 in. Biesemeyer Fence System

  • Unrivaled vibration control,for smooth operaton and accuracy
  • Bevel dial tunes blade bevel providing accuracy to within 1/4°
  • 5 Year warranty
  • See More Details

Product Overview

The Delta 3 HP Motor 10 in. Unisaw with 52 in. Biesemeyer Fence System is a professional level machine. It has virtually no vibration during operation. It features an On-Board Miter Gauge Storage which is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage are conveniently located beside the switch.
  • Tool-free split guard design allows a true rise-and-fall riving knife by using a lever on the front of the saw or inside the throat plate, you can then add the anti-kickback paws and guard to the riving knife without tools
  • Cabinet construction consists of a large cast iron base providing stability and solid footing
  • Tabletop provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
  • Largest blade opening in class makes fine tuning your riving knife and blade changes easier than ever
  • Unisaw drawer is an accessory item that is sold separately
  • Onboard wrench and push stick storage conveniently located beside switch

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Shop Tool Gift Savings

current product
3 HP Left Tilt Unisaw Table Saw with 52 in. Biesemeyer Fence System
3 HP Motor 10 in. Unisaw with 36 in. Biesemeyer Fence System and FREE 1.0 HP Dust Collection System3 HP Left Tilt Unisaw Table Saw with 52 in. Biesemeyer Fence System and FREE 1.0 HP Dust Collection SystemPM2000B 230-Volt/460-Volt 5 HP 3PH 50 in. RIP Table Saw with Accu-Fence
Name3 HP Left Tilt Unisaw Table Saw with 52 in. Biesemeyer Fence System3 HP Motor 10 in. Unisaw with 36 in. Biesemeyer Fence System and FREE 1.0 HP Dust Collection System3 HP Left Tilt Unisaw Table Saw with 52 in. Biesemeyer Fence System and FREE 1.0 HP Dust Collection SystemPM2000B 230-Volt/460-Volt 5 HP 3PH 50 in. RIP Table Saw with Accu-Fence
Blade Diameter (in.)10101010
Rip Capacity - Right3636 in3650 in
Cordless/ CordedCordedCordedCordedCorded
Work Table Surface64 in. x 31 in.66 in. x 31 in.64 in. x 31 in.22 in. x 30.5 in.
Blade LocationLeftCenteredLeftLeft
Cuts ThroughWoodWoodWoodWood
Table Width (in.)31313130.5
Table Length (in.)64666422
Included AccessoriesRip Fence,StandMiter Fence,Rip FenceRip Fence,StandTool Only
Power Tool FeaturesBlade Guard System,Lockout Power Switch,Stand IncludedBlade Guard System,Lockout Power SwitchBlade Guard System,Lockout Power Switch,Stand IncludedBlade Guard System
View ProductView ProductView ProductView Product



Blade Diameter
Maximum Cut Depth @ 90 Deg.
Product Depth (in.)
Product Height (in.)
Product Width (in.)
Table Length (in.)
Table Width (in.)
Work Table Surface
64 in. x 31 in.


Amperage (amps)
Bench & Stationary Tool Type
Table Saw
Blade Diameter (in.)
Blade Location
Blade Speed
Color Family
Construction Material
Cast Iron
Cord Length (ft.)
Cordless/ Corded
Cuts Through
Depth Control
Dust Collection Method
4 in. Dust Port
Horsepower (hp)
3 hp
Included Accessories
Rip Fence,Stand
Maximum Cut Depth @ 45 Deg.
Maximum Speed (rpm)
Power Tool Features
Blade Guard System,Lockout Power Switch,Stand Included
Product Weight (lb.)
PT Horsepower (Hp)
Rip Capacity - Left
Rip Capacity - Right
Table Tilt Left Max (degrees)
Table Tilt Right Max (degrees)
Tools Product Type
Power Tool

Warranty / Certifications

Certifications and Listings
CSA Listed,cUL Listed
Manufacturer Warranty
5 Year Warranty

Questions & Answers


single or three phase motor?

Asked by mullen36 May 6, 2017

This is a there phase motor

Is the table included on the 3 hp saw

Asked by bulldog May 4, 2016

Yes the table and legs to support it are included

52 inch biesemeyer fence accurate to one quarter inch, what is this referring to?

Asked by lou March 20, 2018

It is referring to the dial on the blade bevel being accurate to 1/4 DEGREE

How does shipping work with this product? How many boxes and how manageable is each one?

Asked by TJ August 26, 2016

If I remember correctly it all came in two boxes . You'd probably need four people to move it into your garage if you don't have a pallet jack, since it did come on a pallet. You might be able to get it in your SUV if you can take the seats out , at least the back row seats.

Is this saw 110 or 220 volts

Asked by JR December 8, 2015

It's 220 volt and doesn't come with a plug. You have to purchase and wire one up to the cord, that comes with the saw, to suit your particular 220 outlet .

What is the height of this saw? (floor to top of table)

Asked by learnedthehardway April 30, 2019

Log in to "", in the search bar type the "Delta 10" left tilt cabinet saw" when the page loads up it will have a "Details list"- ALL the information you could want is listed and described- Happy Sawdust !!

How many belts drive this saw

Asked by Wildman May 15, 2016

I believe it is driven by one belt !

Where is the Marathon motor made?

Asked by GReg January 19, 2017

My saw is packed in pretty tightly in the garage right now so I can't get the motor cover open far enough to see if it is made in America, but I think it is ! You'll probably get more positive results by asking the people at Delta.

Will the Armature except a dado blade my old cheap ridged saw will not.?

Asked by JM October 5, 2019


Where is the Unisaw made at?

Asked by Lance November 25, 2016

I'm not completely sure where these are made ,but from the looks of the fit and finish I would almost be certain they are built and made in America. Mine went together very well and everything seems to be made with precision. If you need more details on the saw see my thorough review on the internet( Amazon)

3 HP Left Tilt Unisaw Table Saw with 52 in. Biesemeyer Fence System - page 2

Customer Reviews

  • 5 Customer Reviews
  • 5 out of 5 stars overall
100% of customers recommended.
Overall Ratings
Sort By:
Best Cabinet Saw on The Market
Quality :
Value :
I've owned this saw for 3 years now (My Mom bought it for me for being her Caregiver) I have a 1946 Darra James 12" Table saw, this is as well built as the "Old Beast" but with more HP, I've been building "Heirloom Quality" Custom Woodwork for 38 years, the bottom line is this saw is easier to set up for differant sawing projects, the tilt gauge on the adjustment Handwheel is "Spot on", Blade changing is super easy, dust collection is very well thought out and stays clean with just a "Dust Deputy" , it slices thru 2" Hard Maple like butter, the adjustment Handwheels are up front for easier access, it will accept a 15/16" Dado Blade and powers it as easy as a full kerf rip blade, so many features that older saws didn't have I couldn't begin to list them all
Was this helpful?
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
A fine piece of workmanship
I purchased the 3 HP model with the dust collector when it was a special buy. I was so impressed on how it was packaged and protected for shipment. I heavy saw so get a good dolly and a couple of buddies to help move it to your shop. Assembly took a while but spending time getting the wigs level with the main table and making sure the extension table was on the same plane as the main table saved a lot of frustration when installing the fence. The saw is quiet and very smooth, cuts well and the fence is dead on. I am so glad I upgraded from my contractor saw. My fist few cuts were so easy and accurate. Couldn't be happier. I always owned Delta and they did not let me down. Exceeded my expectations
Was this helpful?
Finest cabinet grade saw on the market !
I've used this saw for almost three years . I'm a cabinet and furniture maker and as far as I''m concerned this saw is the finest of the regular cabinet grades table saws on the market today. In my opinion it's a better saw than the Saw Stop because it's overall design is better for the user. Do your own research and read other reviews on the internet and I think you'll agree.
Was this helpful?
Listing is Wrong with Home Depot
Quality :
Value :
I'm assuming anyone purchasing this item would know what they are getting. Just in case, the max rip to the right is 52" not 36". The 36" is 36-L336. Also, the image is not accurate as the drawer is not included. However, Delta will likely hook you up if you just give them a call. Good luck finding a bad review on a unisaw by anyone that knows what they are talking about.
Was this helpful?
Review this Product
Share your thoughts with other customers