Integrity Series 80 CFM Ceiling Bathroom Exhaust Fan with Dimmable LED Light, Energy Star

I replaced a 25yr old bathroom fan for this one. I can tell you it is super quite! Also, does it move it air! The final test was taking a long hot shower after the install and the mirror didn’t have a single bit of fog! Install was simple and I love that it saves on energy, compared to the old one. If you’re thinking about a new bath fan... get this one. (Go 80cfm or more)

Was delivered pretty quick. Fairly easy to install. I had to access the attic to install but it was pretty straight forward. I like how quiet it operates. Sound was one of my biggest factors when buying and this unit did not disappoint. The additional light in the bathroom near the shower is a plus as well. I would definitely recommend this to anyone lookin for a quiet bathroom fan.

Good fan at very reasonable price. Very quiet...though it does take a second or two to spin up. I replaced two builder's grade units in my bathroom--one above the shower and one in toilet closet. Measured it with a sound app on my iPhone at only 47 decibels.

8x8 bathroom and 80 CFM should be plenty for 64 square feet. I see very little to no difference from the contractor grade 50 CFM I replaced. I will likely return it.

The construction and durability of the fan is very good. Even the plastic parts seem adequately sturdy. The hardest part of the installation was connecting the fan to a new exhaust duct. Prior homeowners had no exhaust duct work, so I had to buy new duct work and extensions and a cap so that the bathroom vent could direct the air upward and outward instead of just blowing into the attic and insulation. After pre-assembly of the duct work (which took quite a bit of time), attachment to the fan was relatively quick and easy using Nashua foil tape. Attachment of the wiring was a little hard, trying to hold the fan body unit up while trying to connect the wires but I eventually overcame and completed the task. It was noted that there were no wire connectors provided. Thankfully, I already had some in my home tackle. I drilled three hole into the joist and connected the fan body to the joist with long screws (also not provided but I had some good wood screws that did the trick). The inner electrical connection was easy via a provided plug-in. The light kit was equally easy with a wired plug-in and spring-wired connectors for the lighting fixture itself, enabling easy push up and into place to complete the project. I love this fan because: 1. The fan does a great job of drawing steam and odors out of the bathroom with very little sound. The sones on this unit are very low. 2. The light is bright and awesome. It really helps brighten the bathroom allowing folks in the shower to see better. I wholeheartedly recommend this fan.

I'm a weekend diy kind of guy. Our old fan wasn't exhausting the moisture anymore so I picked up one of these. Key points Same footprint as my older fan unit (hole size) Doesn't sound like a broken electric fan Mostly quiet, has a slight humming at 1.0 sone. Bluetooth speaker Took about 1hr to install. The install was easy. Watch the Delta install video and reused the wood screws from the old fan. Took a bit of time to maneuver the unit in the hole. The exhaust vent works really well. Before the mirror would be 100% fogged up during winter season. Now I only get the very top corner. I'm extremely happy with this purchase, I purchased another one for the second bathroom. Best part, I 3D printed a Google Home Mini mount and replaced the small Bluetooth speaker.

Easy to setup. I replaced an old NuTone circular housing fan with this fan. Most of my work in patching the big circular hole in the ceiling since most of the new exhaust fans come in square/rectangle housing. Only challenge is that you have to use a small length screw driver, about 7 inches in length (width of the housing) while driving the housing screws into the wood. Such less room within the housing makes driving the screw a bit of a task. I presume this would be challenge with driving screws with any housing if mounting from the sides. There is no need to have access to the attic for side installation. Alternatively an angled drill machine should be helpful.

Works great! Fan is super quiet and Bluetooth speaker plays music very clearly. No problems with installation.

This bath fan replaced our old fan that stopped working in our master bath. I figured if I had to be pulling things out of my ceiling, then I wanted an upgrade, so went with one that is more quiet and has a speaker. So far this works great. It keeps mirrors clear and humidity off our walls during showers. It is quieter than our previous fan, which had the same CFM rating. It is quiet, but loud enough that you can tell when it is on and also has a small and inconspicuous blue light to let you know the speaker is active. The speaker is loud enough to hear music while I am drying my hair or showering, but the fan doesn't take up larger space than our standard small hole because of the fan. I am happy with the overall purchase. The only reason I give it 4 instead of 5 stars is that I feel like the price tag for this fan (and bath fans in general) is a little high.

I receiver the DELTA BREEZ 100 CFM INTEGRITY BATHROOM EXHAUST FAN WITH EDGE-LIT DIMMABLE LED LIGHT, WHITE. I had the fan put in by a contractor, I usually do my own work but have a knee problem. The fan was easy to install it took the man about 1 1/2 hours to do it. The results are great, I can not believe how quiet the fan is and still move a lot of air. The light is brighter than the old two bulb light, but not glaring. I'm very happy with the light/fan.