Yes there is screws, but you need to first remove 2 square frame by push upward then pull out, see photo I attached. Then you’ll see the screws within.
Yes it does and is a very good looking and easy to use paper holder.
LUPY, Thank you for your question. To better answer your question, please reach out to our customer care providers who can assist with either center to center brackets mount measurements, or distance between the two bases center to center. They are available Monday – Friday 8:00 a.m. to 5:00 p.m. EST. and can be reached at 800-635-2731 or by email at customersolutions@libertyhardware.com. Best, Customer Care Team
Hi Yes I think so as long as there is a circular gap throughout the whole roll.
I have no play right to left. This fits securely in place.
Sweave, Thank you for your question. Generally Venetian bronze will be darker than a brushed finish. Best, Customer Care Team
I'm measuring about 7.5 inches center-to-center. Of course, the new mounting brackets are unlikely to have exactly the same vertical spacing as your existing brackets, so two more holes *might* be required. Good luck!
No, if properly installed, those 2 square base should stay firmly not move at all
Myra, Thank you for your question. When removing this item you will need to push upward and pull out at the same time to release the mechanism. Best, Customer Care Team
Yes, that exactly what I did to mine. But be aware that those screws will penetrate your cabinet probably about .25” depth.