Portwood Pivoting Toilet Paper Holder in SpotShield Brushed Nickel

Recommended Product

1 person found this helpful

Sep 2, 2020

What a great design. The Delta Port wood pivoting paper holder is one of the best ideas I have se...

What a great design. The Delta Port wood pivoting paper holder is one of the best ideas I have seen in a while. Delta has always had great quality and style and the Port wood has them both with the classy style it fits any decor and the oil rubbed bronze finish is beautiful the installation was very easy came with a template and all the hardware to install I only needed a level a tape and a screw driver it took only 15 minutes to install. And the use of a pivot handle instead of a spring roll is awesome.

by Bad

Recommended Product

Aug 30, 2020

I really like the design and appearance of this toilet paper holder. I was replacing an old brush...

I really like the design and appearance of this toilet paper holder. I was replacing an old brushed nickel toilet paper holder with this one to match the finish of the rest of the bathroom, and installation was straightforward, though a bit tedious. I will say that in a new installation situation, I'm sure it would be far easier. I had existing holes I was trying to use to minimize damage to the wall, and naturally, those holes didn't line up with the new product. Once installed though, it looks sharp and is very sturdy. The directions are straightforward and include a template for easily marking where to drill. It does require you to tighten a set screw at the base of the holder, which was a bit difficult due to the tight space, but overall it's a pretty easy install that can be completed by one person in 15-20 minutes.

by Judson

Top 100 Contributor

Recommended Product

Aug 30, 2020

Quality product. I am so weary of the toilet paper bar coming off because someone didn’t refill t...

Quality product. I am so weary of the toilet paper bar coming off because someone didn’t refill the toilet paper correctly. This holder solves that problem outright. It has a solid design and when you close the bar down there is a little click that holds it in place so that the bar does not lift up while you’re pulling the paper. Easy installation, just use the included template for mounting.

by KevinB

Pro

Recommended Product

Aug 26, 2020

We have been updating or basement bathroom and I chose the Delta Portwood Pivoting Toilet paper ...

We have been updating or basement bathroom and I chose the Delta Portwood Pivoting Toilet paper holder in Venetian bronze To update the look. I like the fact that the piece that holds the paper roll doesn’t come off. It feels like it is well made and should hold up. It comes with well written directions and a template. It also comes with the screws and the drywall anchors needed.

by SZ65

Recommended Product

Aug 21, 2020

The Delta Portwood toilet paper holder with rotating arm is very attractive. With its’ Venetian B...

The Delta Portwood toilet paper holder with rotating arm is very attractive. With its’ Venetian Bronze color it complements my sea scene decor. While attractive, it was a pain to install. Unlike a towel rack, a toilet paper holder is lower to the ground, making the set screw more difficult to accurately place the Allen wrench After it’s all said and done, the toilet paper holder is installed!

by Nancy

Recommended Product

Aug 21, 2020

I love beautiful hardware and the Delta Portwood Pivoting Toilet Paper Holder in Venetian Bronze is exactly that…beautiful. I am very pleased with the ease of installation, quality, and design. Changing a roll of tp has never been easier thanks to the pivoting arm. All hardware is included as well as installation instructions and a template. I attached the template to the wall with a piece of tape. Then I made sure the template was level and then I marked the four holes with an ice pick. Next, I drilled the holes and installed the hardware including the provided anchors. Once I put the brackets on, I installed the toilet paper holder and adjusted the set screws. Project was done in about twenty minutes.

by RebuildingAfterHarvey

Recommended Product

Aug 21, 2020

This is a very good looking toilet paper holder. I love that it pivots to add/remove roll and I d...

This is a very good looking toilet paper holder. I love that it pivots to add/remove roll and I don't have to worry about the spring loaded rod. This is a nicely made very sturdy holder it matches my decor perfectly and is much nice than the porcelain holder I replaced. It's important to measure multiple times and be very precise with installation. The pivoting bar needs to rest on the other side and you can't have it too close or too far away from the other size of the holder. The instructions come with a template that makes things easier but you still need to make sure it's level. I would recommend mounting the pivot side into a stud as it get's a lot of movement. The hardware includes heavy duty drywall anchors so drywall is fine but I recommend a stud for the pivot side.

by FescueRescue

Recommended Product

Aug 20, 2020

The “Portwood” pivoting toilet paper holder by Delta is just what our bathroom remodel needed to ...

The “Portwood” pivoting toilet paper holder by Delta is just what our bathroom remodel needed to enter the 2020s. If you’ve never owned a pivoting TP holder, you’ll wonder why you waited as it’s so easy to change out the roll. I am waiting for Project Man aka my husband to install it. It looks like you can only install it to lift from the left hinged side to drop down to the right side’s holder. It doesn’t matter in most situations but some holders are reversible. The color is bronze with some slight rust showing through. The TP holder with a full roll is a tight fit but it does clear the sides and wall when I set it up on my counter top. We’ve installed several similar TP holders over the years, so precision in installing it is super important or it won’t close all the way or it can miss its side holder.

by Bogeymom