Multi-Max 1-5/8 in. Oscillating Universal Dual Interface Carbide Flush Cut Blade For Wood, Metal, and Cement
- For use with all oscillating tools (sold separately)
- Cuts hardened materials such as screws, plaster, metal and more
- Universal Quick Fit lets the blade fit on most oscillating tools
- See More Details
Frequently Bought Together
Price:
$1997
Product Overview
Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter. The unique dual interface fits all competitive Oscillating Tool, including those with a quick change feature. The Dremel MM485U universal carbide flush cut blade has high-performance carbide teeth designed to cut hard and abrasive materials like nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more. Its wide 1-1/4 In. blade speeds through long cuts and can make plunge cuts up to 1-11/16 in. D.
- First truly universal oscillating accessory interface in the market, no adapter needed U2 accessories fit all competitive tools
- High performance flush cut blade provides longest life and fastest cut of all Dremel flush cut blades
- MM485U carbide flush cut blade is the same cutting accessory as the current MM485, but with the new U2 interface
- Width: 1-1/4 in., length: 1-11/16 in.
- 1ST OSCILLATING CUTTING BLADE IN THE MARKET
Product Overview
- For use with all oscillating tools (sold separately)
- Cuts hardened materials such as screws, plaster, metal and more
- Universal Quick Fit lets the blade fit on most oscillating tools
Specifications
Dimensions
Product Depth (in.)
6.25
Product Height (in.)
5.5
Product Length (in.)
6 in
Product Width (in.)
1.25
Details
Accessory Fitment
Universal
Application Type
Cutting
Blade Material
Carbide
Color Family
Black
Number of Pieces
1
Oscillating Tool Attachment Type
Blade
Power Tool Accessory Type
Oscillating Tool Accessory/Part
Returnable
180-Day
Tools Product Type
Power Tool
Questions & Answers
13Questions36Answers
Will these work in the Ryobi tool?
Asked by MRM July 19, 20202
AnswersThe Dremel MM485U Dual Interface Oscillating Blade is compatible with the Ryobi Tools. For further assistance, please contact us at 1-800-437-3635, Monday - Friday, 8A-5P CST.
Will this fit Dremel Multi Max 6300-05? I need to cut some pine trim. So I don't need a lot of po...
Asked by Brian May 3, 20203
AnswersShould fit. Blade is slightly thicker than standard wood blade so if you are using in pine I would use a standard wood blade.
Will this fit the Dremel MM50?
Asked by CURMO September 19, 20192
AnswersThe Dremel MM485U Blade is compatible with the Dremel MM50. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday - Friday, 8A - 5P CST.
I have a Crasftman Bolt-on or Black&Decker Matrix (one and the same) will this fit the oscillatin...
Asked by Laurent June 28, 20193
AnswersNo
will these blades work on a ridgid jobmax
Asked by Prualarms November 14, 20183
AnswersYes. I have a Jobmax. It comes with an adapter to fit Dremel and Bosch blades. This blade fits perfectly onto the Jobmax.
Will this cut throug a golf club?
Asked by Cass October 9, 20185
AnswersMost likely. It's carbide tipped so metal isn't a problem It may take a little time depending on the hardness of the metal. A standard hack saw might be a little easier to use for what you're doing.
Will this cut corian?
Asked by Rob January 21, 20185
AnswersDon't know I cut nails
Can this blade be used to cut small pieces of a stone backsplash prior to installation
Asked by tj October 31, 20174
AnswersNo. You need a diamond blade to cut stone.
will this fit the Dremel mm30
Asked by homer July 5, 20174
AnswersYes it's designed for use on multi type tools.
Can I use this blade to make a 1/8" notch in a glass tile that is already installed on a backsplash?
Asked by steve January 16, 20175
AnswersGo very slow, use tape[cloth backed tape] and use water as you cut. GO SLOW
Customer Reviews
Oct 28, 2018
Blade does not last
As other reviewers have noted, this blade does not last when cutting stainless steel bolts. I cut a single 3/8 inch stainless steel bolt in an anchor swivel, and the blade was basically toast. That's an expensive cut. $20 for a single cut.if something says carbide on it, I expect it to last a while longer.
by Bill
Apr 18, 2018
My husband had bought a Dewalt multi tool recently at Home Depot. With that he had a blad that wa...
My husband had bought a Dewalt multi tool recently at Home Depot. With that he had a blad that was included. Within a week of owning the to he had broke the blade. We went back to Home Depot and found the Dremel blade which is multifunctional. He loves it! It is so much more durable, effective,efficient, and just makes it resourceful for all of his tasks at hand!
by Norma
Mar 7, 2017
I used this blade on my DeWalt multitool. The edge worked well for a few hours. (I used it on a s...
I used this blade on my DeWalt multitool. The edge worked well for a few hours. (I used it on a synthetic water-proof wall product called Wedi board.) Suddenly the blade was rattling. When I looked closer I realized it had broken where it attaches to my tool. So the edge was still intact, but I could no longer user it because there was nothing to attach it to.
The cutting was great for my purposes, but I can't recommend it in good faith without understanding the cause of the breakage.
by
