Internet #304236877

Model # CTH1375

0887861226127

Drill America

1-3/8 in. Carbide Tipped Hole Cutter with 1 in. D of Cut and Auto Ejecting Slug

  • For stainless steel, cast iron, sheet metal and abrasive material
  • Easy and efficient way to drill larger diamater holes
  • Fits in a hand drill or drill press
$ 51 05
Loading Options
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • For stainless steel, cast iron, sheet metal and abrasive material
  • Easy and efficient way to drill larger diamater holes
  • Fits in a hand drill or drill press
Drill America Carbide Tipped Hole Cutters offer an easy and efficient way to drill larger diameter holes without requiring large drill bits and extra-large chucks. They are manufactured from premium grade high speed steel with carbide tipped teeth for extra-long lifespan. Carbide Tipped Hole Cutters cut a wide range of materials such as stainless steel, cast iron, sheet metal and copper. They also work well with abrasive materials like high density resin and metal plates.
  • Cut a wide range of materials such as stainless steel, cast iron, sheet metal and copper
  • Work well with abrasive materials like high density resin and metal plates
  • Has auto ejecting slug
  • Comes with pilot drill and hex key
  • 1 in. D of cut
  • Can cut over 300 holes in stainless steel plate
  • California residents see Prop 65 WARNINGS

Product Overview

  • For stainless steel, cast iron, sheet metal and abrasive material
  • Easy and efficient way to drill larger diamater holes
  • Fits in a hand drill or drill press
Model #: CTH1375
Internet #: 304236877

Drill America Carbide Tipped Hole Cutters offer an easy and efficient way to drill larger diameter holes without requiring large drill bits and extra-large chucks. They are manufactured from premium grade high speed steel with carbide tipped teeth for extra-long lifespan. Carbide Tipped Hole Cutters cut a wide range of materials such as stainless steel, cast iron, sheet metal and copper. They also work well with abrasive materials like high density resin and metal plates.

  • Cut a wide range of materials such as stainless steel, cast iron, sheet metal and copper
  • Work well with abrasive materials like high density resin and metal plates
  • Has auto ejecting slug
  • Comes with pilot drill and hex key
  • 1 in. D of cut
  • Can cut over 300 holes in stainless steel plate
  • California residents see Prop 65 WARNINGS

Specifications

Dimensions

Bit Diameter
1-3/8 in
Bit Length (in.)
1
Drilling Depth (in)
1
Hole Saw Diameter (in)
1-3/8"
Shank Diameter
1/2 in

Details

Arbor Size
3/8 in
Arbor included
No
Bit Material
High Speed Steel
Drill Bit Type
Hole Saw
Drill Bit Type(s) Included
Hole Saw
Individual/Set
Individual
Material Cut
Metal
Min Chuck Size Required
3/8 In.
Pilot Bit Included
Yes
Returnable
90-Day
Shank Style
3-Flat
Teeth Per Inch
0
Tools Product Type
Power Tool

Specifications

Dimensions

Bit Diameter
1-3/8 in
Bit Length (in.)
1
Drilling Depth (in)
1
Hole Saw Diameter (in)
1-3/8"
Shank Diameter
1/2 in

Details

Arbor Size
3/8 in
Arbor included
No
Bit Material
High Speed Steel
Drill Bit Type
Hole Saw
Drill Bit Type(s) Included
Hole Saw
Individual/Set
Individual
Material Cut
Metal
Min Chuck Size Required
3/8 In.
Pilot Bit Included
Yes
Returnable
90-Day
Shank Style
3-Flat
Teeth Per Inch
0
Tools Product Type
Power Tool

Questions & Answers

I am looking for a high quality hole saw for wood. Will this work on plywood? It says it is only for metal.

Asked by: FractOrr
Hello Yes this will work on wood as well. To see it in action check out the Drill America Hole Saw video here: https://www.youtube.com/watch?v=2PSIXI4owmM
Answered by: Drill America
Date published: 2018-07-31

How well will this do on 3/8" steel beams?

Asked by: nJustinw
Should work well. The beams I have used these on were 5/16" thick.
Answered by: MagDrill
Date published: 2018-08-16

I was wondering the TPI of the 4in option.

Asked by: Snap
Hello The 4" hole cutter has 6 teeth. Thanks.
Answered by: Drill America
Date published: 2018-08-17

If this is used in a drill press can you use it without the pilot bit in the middle? What is rec...

If this is used in a drill press can you use it without the pilot bit in the middle? What is recommended speed? Will it cut through 1" carbon steel plate?
Asked by: MagDrill
Hello, The carbide tipped hole cutter can be used on the drill press as long as the workpiece is held in a vide and the vise is bolted to the table. This cutter will cut midle steel plate under 1" at approx 400 RPMS. Thanks!
Answered by: Drill America
Date published: 2018-07-31
  • y_2019, m_6, d_17, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_304236877, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 64ms
  • QUESTIONS, PRODUCT

Customer Reviews

1-3/8 in. Carbide Tipped Hole Cutter with 1 in. D of Cut and Auto Ejecting Slug is rated 4.5 out of 5 by 24.
Rated 5 out of 5 by from I needed to install a grommet to my Oklahoma Joe's Smoker and didn't want to use a step drill bit... I needed to install a grommet to my Oklahoma Joe's Smoker and didn't want to use a step drill bit. I want to make one hole and be done with it, so I ordered this 1-1/4 in. Carbide Tipped Hole Cutter by Drill America and it worked, one and done. Just make sure you have some sort of liquid handy to spray your bit down to cool it off between drills. Also, this bit has a big chuck, so you will have to have a bigger drill, luckily I had my Makita hammer drill handy for this.
Date published: 2019-04-08
Rated 5 out of 5 by from Went through a 1951 ford pickup truck frame like butter... Went through a 1951 ford pickup truck frame like butter
Date published: 2019-04-02
Rated 5 out of 5 by from Just awesome! Love it! Just awesome! Love it!
Date published: 2019-04-30
Rated 4 out of 5 by from works well... works well
Date published: 2019-03-29
Rated 5 out of 5 by from Great product! Be aware of what drill you use.... Great product! Be aware of what drill you use.
Date published: 2018-12-27
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2019-03-06
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2019-02-06
Rated 5 out of 5 by from Great bit for drilling through metal. ... Great bit for drilling through metal.
Date published: 2019-01-01
  • y_2019, m_6, d_17, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_, sid_304236877, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 64ms
  • REVIEWS, PRODUCT