Model # MC815

Internet #100345609

Store SKU #181588

E/O Magnetic Vent Covers
0077578053226

E/O Magnetic Vent Covers

  • Helps save energy
  • Magnetic
  • Fits large side vents and can be cut to size
$ 4 98
Buy 4 or more  $4.48  
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Helps save energy
  • Magnetic
  • Fits large side vents and can be cut to size
The Thermwell Magnetic Vent Covers are white and can be cut to size. They block floor, wall and ceiling metal vents. The covers also fit large side vents. They can be painted to match the color of your walls. They help redirect air movement from one room to another.
  • Blocks out air for floor, wall or ceiling metal vents
  • Helps save energy
  • Magnetic
  • Fits large side vents and can be cut to size

Product Overview

  • Helps save energy
  • Magnetic
  • Fits large side vents and can be cut to size
Model #: MC815
Sku #: 181588
Internet #: 100345609

The Thermwell Magnetic Vent Covers are white and can be cut to size. They block floor, wall and ceiling metal vents. The covers also fit large side vents. They can be painted to match the color of your walls. They help redirect air movement from one room to another.

  • Blocks out air for floor, wall or ceiling metal vents
  • Helps save energy
  • Magnetic
  • Fits large side vents and can be cut to size

Specifications

Dimensions

Outside Length
8 in
Outside Width (in.)
15 in

Details

Color
White
Color Family
Whites
Decorative
Yes
Louvered
No
Material
Plastic
Product Weight (lb.)
1.2lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
90 DAYS

Specifications

Dimensions

Outside Length
8 in
Outside Width (in.)
15 in

Details

Color
White
Color Family
Whites
Decorative
Yes
Louvered
No
Material
Plastic
Product Weight (lb.)
1.2lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
90 DAYS

Questions & Answers

Can these be cut to fit a decal ( for car bumpers or windows ), and use as a magnetic decal for t...

Can these be cut to fit a decal ( for car bumpers or windows ), and use as a magnetic decal for the car instead of sticking the decal onto the car?
Asked by: MDH
Absolutely. Must be steel bodywork. Clean the car surface and make sure there is no debris on the magnets. The cutouts I did in legal Autocross/SCCA racing size stuck perfect and stayed put at 100+ mph.
Answered by: SimpleM
Date published: 2018-11-17

can they be cut?

can they be cut?
Asked by: llynch
Yes. Use scissors or a paper trimmer
Answered by: Craftingonabudget
Date published: 2018-11-26

Do these work with metal vents that are painted?

Asked by: MKITFN
They did not work for me on a wall vent that was painted over . On a vent with the original paint finish it did work.
Answered by: steve
Date published: 2019-01-08

will the magnetic vent covers for air conditioner vents stick to stainless steel?

Asked by: Anne
It depends on the specific alloy. Some stainless steel is magnetic, other types aren't. For a further description, check out this link: http://www.physlink.com/Education/AskExperts/ae546.cfm As mentioned by NaPra, the easiest way to find out if *yours* is magnetic, is to try a refrigerator magnet on it, or some other item in the house that you know to be magnetic.
Answered by: Cheesehead
Date published: 2018-10-24
  • y_2019, m_4, d_23, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_, sid_100345609, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 30ms
  • QUESTIONS, PRODUCT

Customer Reviews

E/O Magnetic Vent Covers is rated 3.1 out of 5 by 237.
Rated 4 out of 5 by from IMPORTANT REVIEW!!! Past bad reviews take notice. I read all the bad reviews and still bought these vent blockers. The price was right, a 110 degree day in VA, and two vents that wont close so I stayed positive. I cut one to the size of my vent on my ceiling and it fell to the ground... Used common sense and cleaned the vent to prevent dust and held it back up to the vent and pressed firmly focusing everywhere except where the screws were and lever to open and close. After a few miniutes it is like it formed itself or joined to the metal and 24 hours later it is still up there. Note: the AC was running at the time and I used a bit of scotch tape. 24 hours later scotch tape not holding but magnet still there. Not sure if the tape helped at all. I think I used it just in case. AC and scotch tape dont mix with cold temps. I would have paid a bit more if these were a bit thicker/stronger magnet and whiter color to match better with the walls. End note, patience and common sense.
Date published: 2012-07-07
Rated 5 out of 5 by from After reading some reviews of this product, I was curious as to my actual need. But, for health r... After reading some reviews of this product, I was curious as to my actual need. But, for health reasons, I went up and purchased a pack of three. Returning home, within a matter of a half hour, I had two installed where the need was greatest. the third, I placed in a handy spot in the garage. I must seriously question the truthfulness - OR - the mechanical abilities of the previous reviewers. Both of the units installed are working as advertised and, most importantly, as hoped for. Installation was about as easy as one can get. For a good fit, it is necessary to cut a couple of notches to fit over the screws -1/8 inch each. One other slit for the flow adjuster. THAT was IT! After a few of the previous reviews, I could only respond with "WHAT was the problem?" Oh...and you do have to recognize the magnetic side to place against the metal of the vent.
Date published: 2018-07-08
Rated 5 out of 5 by from This product is fine. I cut these covers to fit and they stuck to my ceiling vents just fine. I should mention that I did make little cutouts for the slide (in the closed position) and the mounting screw heads to assure the covers fit flush with the surface of the vent. Turned on the air and they didn't budge. t think many of the complaints in other reviews may have to do with the fact that these covers won't stick to aluminum/plastic vents (nor to stainless refrigerator doors, which aren't magnetic either). It's also possible that some vents just don't have enough solid metal around the louvers to allow the magnet to stick well. I do think making cutouts for the slide and screw heads helped give me a good result. I'm glad I ignored all the bad reviews and decided to give these a try.
Date published: 2014-06-22
Rated 5 out of 5 by from I don't understand some of these reviews. Take ANY magnet and put it up your vent. Does it stick?... I don't understand some of these reviews. Take ANY magnet and put it up your vent. Does it stick? Then this product will work. It's not a strong magnet, so if your vent isn't already restricting the airflow, I can see how that might be a problem. Also, make sure to clean and let dry the surface you're putting the magnet on first. Cut and applied to my ceiling vent and works perfectly at completely restricting the air. Best $5 I've spent in a while.
Date published: 2019-03-07
Rated 5 out of 5 by from I cut them up to mount paper cutting die organization.... I cut them up to mount paper cutting die organization. This is the least expensive way to have enough magnet. I back some of it to cardboard to strength.
Date published: 2019-02-27
Rated 5 out of 5 by from These magnetic vent covers are great for my scrapbook metal dies..they hold them in place and are... These magnetic vent covers are great for my scrapbook metal dies..they hold them in place and are easy to cut them to the size I need for storing.
Date published: 2019-04-09
Rated 1 out of 5 by from Does not work. As soon as these get warm, they... Does not work. As soon as these get warm, they start to melt and lose grip, slide off the vent.
Date published: 2019-03-12
Rated 5 out of 5 by from I used this product for my thin dies. I cut... I used this product for my thin dies. I cut each mat into thirds to use.
Date published: 2019-02-05
  • y_2019, m_4, d_23, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_237
  • loc_, sid_100345609, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT