Internet #304617794

Model # 319-M10

0847554001103

M10-1.5 Metric x 1/2 in.-13 Threaded Insert - Thin Wall - Carbon Steel (Pack of 5)

$ 10 90

Overview

E-Z LOK Thin Wall inserts offer the advantages of E-Z LOK Standard Wall threaded inserts while using a hole size virtually the same as E-Z Coil inserts. Ideal for applications where thread insert size and weight are an issue, Thin Wall threaded inserts pack all the traditional E-Z LOK (Solid Wall) advantages into a smaller diameter design. Available with internal thread sizes from #10 to 1/2 and M4 to M12, E-Z LOK (Solid Wall) Thin Wall threaded inserts install with standard tools. E-Z LOK (Solid Wall) Thin Wall solid threaded inserts use a modified external thread to reduce the hole diameter needed to achieve the desired internal thread size. To achieve this size reduction, these inserts have an oversized minor diameter on the OD thread. This provides sufficient wall thickness to maintain insert integrity, but does necessitate the use of a drill that is larger than typically used with the corresponding tap. E-Z LOK (Solid Wall) Thin Wall inserts are self-locking. Immediately upon installation, pre-applied LOCTITE on the external threads begins to set and the newly installed insert is fastener ready in minutes. At full cure (72-hours), the Loctite seals against liquids and gases to pressures of 6,000 psi. Specifications: Style: Solid Wall, Type: Thin Wall, Alloy: Steel - Carbon, For Use In: Metal, Internal Thread Size: M10-1.5, External Thread Size: 1/2-13, Installed Length: 13.00 mm, Drill Size: 29/64, Tap Size: 1/2-13, Installation Tool P/N: 500-5.

Frequently Bought Together

Frequently Bought Together

Product Overview

E-Z LOK Thin Wall inserts offer the advantages of E-Z LOK Standard Wall threaded inserts while using a hole size virtually the same as E-Z Coil inserts. Ideal for applications where thread insert size and weight are an issue, Thin Wall threaded inserts pack all the traditional E-Z LOK (Solid Wall) advantages into a smaller diameter design. Available with internal thread sizes from #10 to 1/2 and M4 to M12, E-Z LOK (Solid Wall) Thin Wall threaded inserts install with standard tools. E-Z LOK (Solid Wall) Thin Wall solid threaded inserts use a modified external thread to reduce the hole diameter needed to achieve the desired internal thread size. To achieve this size reduction, these inserts have an oversized minor diameter on the OD thread. This provides sufficient wall thickness to maintain insert integrity, but does necessitate the use of a drill that is larger than typically used with the corresponding tap. E-Z LOK (Solid Wall) Thin Wall inserts are self-locking. Immediately upon installation, pre-applied LOCTITE on the external threads begins to set and the newly installed insert is fastener ready in minutes. At full cure (72-hours), the Loctite seals against liquids and gases to pressures of 6,000 psi. Specifications: Style: Solid Wall, Type: Thin Wall, Alloy: Steel - Carbon, For Use In: Metal, Internal Thread Size: M10-1.5, External Thread Size: 1/2-13, Installed Length: 13.00 mm, Drill Size: 29/64, Tap Size: 1/2-13, Installation Tool P/N: 500-5.
  • Ideal for applications where hole size is an issue
  • All the advantages of the standard E-Z LOK threaded inserts in a smaller overall diameter
  • Use standard tools for installation
  • Self-locking preapplied loctite adhesive activates on installation
  • Vibration resistant: adhesive secures the insert in place so it wont back out
  • California residents see Prop 65 WARNINGS

Product Overview

Model #: 319-M10
Internet #: 304617794

E-Z LOK Thin Wall inserts offer the advantages of E-Z LOK Standard Wall threaded inserts while using a hole size virtually the same as E-Z Coil inserts. Ideal for applications where thread insert size and weight are an issue, Thin Wall threaded inserts pack all the traditional E-Z LOK (Solid Wall) advantages into a smaller diameter design. Available with internal thread sizes from #10 to 1/2 and M4 to M12, E-Z LOK (Solid Wall) Thin Wall threaded inserts install with standard tools. E-Z LOK (Solid Wall) Thin Wall solid threaded inserts use a modified external thread to reduce the hole diameter needed to achieve the desired internal thread size. To achieve this size reduction, these inserts have an oversized minor diameter on the OD thread. This provides sufficient wall thickness to maintain insert integrity, but does necessitate the use of a drill that is larger than typically used with the corresponding tap. E-Z LOK (Solid Wall) Thin Wall inserts are self-locking. Immediately upon installation, pre-applied LOCTITE on the external threads begins to set and the newly installed insert is fastener ready in minutes. At full cure (72-hours), the Loctite seals against liquids and gases to pressures of 6,000 psi. Specifications: Style: Solid Wall, Type: Thin Wall, Alloy: Steel - Carbon, For Use In: Metal, Internal Thread Size: M10-1.5, External Thread Size: 1/2-13, Installed Length: 13.00 mm, Drill Size: 29/64, Tap Size: 1/2-13, Installation Tool P/N: 500-5.

  • Ideal for applications where hole size is an issue
  • All the advantages of the standard E-Z LOK threaded inserts in a smaller overall diameter
  • Use standard tools for installation
  • Self-locking preapplied loctite adhesive activates on installation
  • Vibration resistant: adhesive secures the insert in place so it wont back out
  • California residents see Prop 65 WARNINGS

Specifications

Dimensions

Assembled Depth (in.)
0.5 in
Assembled Height (in.)
0.512 in
Assembled Width (in.)
0.5 in
Fastener Length (in.)
0.512

Details

Color Family
Metallics
Fastener Type
Specialty Fastener
Package Quantity
5
Product Weight (lb.)
0.0089lb
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
E-Z LOK warrants that the goods supplied shall conform to the stated description. All other warranties, expressed or implied, are hereby disclaimed. E-Z LOKs liability is limited solely to the replacement of defective goods. Warranty claims must be made within 30 days of delivery

Specifications

Dimensions

Assembled Depth (in.)
0.5 in
Assembled Height (in.)
0.512 in
Assembled Width (in.)
0.5 in
Fastener Length (in.)
0.512

Details

Color Family
Metallics
Fastener Type
Specialty Fastener
Package Quantity
5
Product Weight (lb.)
0.0089lb
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
E-Z LOK warrants that the goods supplied shall conform to the stated description. All other warranties, expressed or implied, are hereby disclaimed. E-Z LOKs liability is limited solely to the replacement of defective goods. Warranty claims must be made within 30 days of delivery

Questions & Answers

Which is which, is it metric inside or outside?

Which is which, is it metric inside or outside?
Asked by: michael3500
M10-1.5 is the internal thread
Answered by: E-Z LOK Customer Service
Date published: 2020-03-17
  • y_2020, m_7, d_2, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_304617794, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 4ms
  • QUESTIONS, PRODUCT