Hi Tehmina. We offer a kit containing two 6' handrails with only one end factory bent on each handrail so you can splice them together with the included 5" internal splice. It also contains four wall mounting brackets. I recommend purchasing (4) 5/16" x 2.5" masonry sleeve anchors to attach the brackets to your cinderblock wall. Be careful not to overtighten as it can cause the blocks to break/crumble. Email firstname.lastname@example.org to coordinate purchasing the 12' kit (model#EZA12KWR-CV) as it is not available on homedepot.com yet (5/5/21). Thank you for your question. Dan H. (EZ Handrail Dev. Team)
Hi Jim. Yes, this handrail is installed on brick walls every day. As you may know there are a wide variety of brick types out there. We've found the best overall fastener into brick to be a 5/16" x 2-1/2" sleeve anchor. If the bricks are honeycomb or hollow and won't hold a fastener, a Tapcon works good into the grout with epoxy to reduce the sand deterioration; however, they will loosen over time with use. Email us at email@example.com with job specific questions and visit ezhandrail.com for installation videos. Thank you for your question. Dan H. (EZ Handrail Dev. Team)
A 5 inch EZ internal splice can connect two 6-foot EZ handrail kits for a 12 foot long railing.
Dan H., Thank you so much for sending the sample! The copper was a great match for our oil-rubbed bronze balusters! It was a much better fit than black. (See pics) We ordered the 8’, used a pipe cutter on it to fit our 7’ space, and installed. It looks great and is very sturdy with the matching brackets!
Hi Pepe. As someone mentioned, to achieve a 12' handrail we recommend two 6' lengths (EZA6KIT-CV and EZA100-6CV) and use our internal splice (eza650-M). Thank you for your question. Dan H. (EZ Handrail Dev Team)
Hi Jessica. Yes, the handrail can be cut to any length using a 40-60 tooth WOOD blade on your circular, miter, or chop saw. Yes, you can connect directly to concrete using the EZA400-HB or a new bracket (EZA275-HB) that is not listed on homedepot.com yet (8/5/20). You can email us at firstname.lastname@example.org to review a photo and/or purchase this new adjustable bracket. Thank you for your question. Dan H. (EZ Handrail Dev. Team)
Yes, it comes in white.
Hi John. They are 1/4" thick walled aluminum alloy die-cast and powder coated to an AAMA 2604 spec. Thank you for your question. Dan H. (EZ Handrail Dev. Team)
Hi LB. There are a couple of options: 1) We have a 16' kit that contains (2) 95.25" handrails and a 5" splice that fits internally to mate the round handrails together. As of 2/25/20 this kit is not available on homedepot.com; however we're working diligently to make it (as well as 12' kits) available in the coming months. In the meantime, please email/call us at email@example.com or 573.365.7085 opt. 1 to setup a purchase through your local store (model# EZA16KIT-HB). It is imperative to contact us because store associates will not have proper ordering information. 2) We offer a 24' standalone handrail (no accessories) model #EZA100-HB. You can then cut the handrail to your desired length and insert the endcaps. This is the cleanest look (no seams) and the additional 8' length can be used to make another handrail for a a porch or garage. For this solution you will need: (1) EZA100-24HB (4) EZA200-HB (2) EZA410-HB Thank you for your timely question. Dan H. (EZ Handrail Dev. Team)