#1 Home Improvement Retailer

Internet #100160842

Model #BR130

Store SKU #531792

Store SO SKU #1000501547

BR 30 Amp Single-Pole Circuit Breaker

  • Protects BR load center and overheating by diverting
  • Interrupts a current up to 10,000 Amp and allows 240VAC
  • Trips to center position post circuit break
  • See More Details

Frequently Bought Together


Product Overview

The Eaton Cutler-Hammer 30 Amp 1 in. Single-Pole Type BR Replacement Circuit Breaker is designed to protect house wires from overheating or causing a short-circuit. Single pole breaker applications include use lighting fixtures. The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.
  • Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
  • Amperage rating: 30 Amp
  • Trips to center position - must turn off then turn back on
  • For use in type BR load centers
  • Type BR breakers are UL approved genuine replacement breakers for load centers made by Westinghouse, Challenger and Bryant
  • Interrupt rating - 10 kAIC
  • Voltage rating is 120/240-Volt
  • Wire size - #14-4 AWG Cu/Al at 60°C or 75°C
  • Single pole 1 in. wide breaker
  • Learn More About Circuit Breakers Here in our Buying Guide.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Single Pole Breakers

Q-Line 30 Amp 1 in. Single-Pole Circuit Breaker
current product
BR 30 Amp Single-Pole Circuit Breaker
QO 15 Amp Single-Pole Circuit BreakerQO 20 Amp Single-Pole Circuit Breaker
BrandGEEatonSquare DSquare D
NameQ-Line 30 Amp 1 in. Single-Pole Circuit BreakerBR 30 Amp Single-Pole Circuit BreakerQO 15 Amp Single-Pole Circuit BreakerQO 20 Amp Single-Pole Circuit Breaker
Interruption TypeStandard TripStandard TripStandard TripStandard Trip
Pack Size1111
Breaker TypeSingle PoleSingle PoleSingle PoleSingle Pole
Power Distribution FeaturesNo Additional FeaturesNo Additional FeaturesTrip IndicatorTrip Indicator
Voltage (volts)120120/240120/240120/240
Maximum Amperage (amps)30301520
Mounting TypePlug-OnPlug-OnPlug-OnPlug-On
Electrical Product TypeBreakerBreakerBreakerBreaker
View ProductView ProductView ProductView Product



Product Depth (in.)
Product Height (in.)
Product Width (in.)


Breaker Type
Single Pole
Electrical Product Type
Interruption Type
Standard Trip
Maximum Amperage (amps)
Mounting Type
Number of Poles
Pack Size
Power Distribution Features
No Additional Features
Product Weight (lb.)
Voltage (volts)

Warranty / Certifications

Certifications and Listings
ANSI Certified,UL Listed
Manufacturer Warranty
5 Year Per the Warranty Statement

Questions & Answers


Is this compatible with a Murray MP breaker?

Asked by Bill July 6, 2020

The CL Eaton breakers are. I would try to stick with a Murray breaker

can this be used with a generator?

Asked by rickster1958 April 28, 2019

Not sure what you are actually trying to ask. However, I assume if you wire the generator to the circuit breaker box this breaker would work. Not sure why you would be doing this.

I need to relpace a Challenger 15 AMP breaker issue no LP6943. It clips on the buzz bar on the ri...

Asked by Charlie June 11, 2018

Yes, this type BR breaker is the correct UL Listed replacement for your Challenger loadcenter.

Will this work in a Challenger circuit breaker bo

Asked by Roger July 15, 2017

It will work in a Challenger panel. However, if there was a Challenger panel in my house, I would see about getting the panel replaced by a licensed electrician. While you are in the store buying the circuit breaker, maybe you should pick up a home fire extinguisher.

Will this breaker work in an old General Switch panel?

Asked by Scott September 16, 2016

If you check the label inside the panel door I think you will find that one of the acceptable breakers for a General Switch panel is a Bryant Type BR. The Eaton/Cutler-Hammer Type BR breaker is the Bryant replacement so the answer to your questions is yes, this is the correct U.L. Listed breaker to fit your panel.

Will a Eaton breaker fit a Cutler-Hammer panel

Asked by Ford July 29, 2016

Eaton breakers are Cutler-Hammer breakers. This type BR breaker fits the BR series (gray in color) loadcenters and not the CH series loadcenters which are sandalwood tan in color.


Asked by RLPe July 7, 2016

Hello RLPe! Thank you for your recent inquiry with The Home Depot. We are unable to give quotes online. For further assistance, please contact your local store. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

Customer Reviews

  • 4.9
    out of 50 reviews
  • 100% recommend this product
Filter by:
Showing 1-10 of 50 reviews
Standard 15 amp breaker, fits my Eaton panel.
It trips when it needs to, helping to prevent any electrical fires or damage. I have not had one malfunction over the years. Easy to install on the panel, I strip about a 1/2" of insulation off the wire end. This breaker accepts a single 14 gauge wire. Always turn the main breaker off when installing one of these.
by SteveVA
The breakers are good quality, they are also inexpensive. That...
The breakers are good quality, they are also inexpensive. That cover the conductor well to save accidental shorts and shocks. The breaker is also easy to put in the panel as well as get out, but is securely fastened in there and no chance of falling out! I think it’s the best design yet!
by Arock
Perfect for my application....
Perfect for my application.
by chevycarsdude
Easy install no issues....
Easy install no issues.
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
by Losdog
works good on an EATON box
works good on an EATON box
by george
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Showing 1-10 of 50 reviews