1/2 in. X 96 in. X 7-1/4 in. Expanded Cellular PVC Reversible Beadboard/Nickel Gap Wainscoting Moulding (4 Pack)

Thanks for reaching out. This is a 4-Pack of the 1/2 in. x 96 in. x 7-1/4 in. beadboard/nickel moulding. They are sold per linear length (96 inches/8 feet). A 7-1/4 in. x 96 in. moulding length length would be approximately 4.83 square feet per piece/length. The moulding installs, cuts, and trims easily and hassle-free with general woodworking tools, making it simply to add to any project.

Not 1/2 inch thick --- About 1/4 thick -- I got a two pack -- That's 8 pieces. -- It is about 7-1/4 wide

Thanks for reaching out. If you had previously ordered the "DELUXE BEADBOARD 8' PVC WAINSCOTING KIT", by Ekena Millwork, the beadboard can be ordered separately, under Model # MLD05X01X96RBSWPV. Hope this helps! Please feel free to reach out with any further questions.

It can cover 4 sq ft.

Yes, absolutely. We recommend a good quality, vinyl safe 100% acrylic latex paint. For best results, prime the product thoroughly to achieve a smooth, consistent, paint-ready surface. The carved areas may require additional prime coats. Tips on Painting: To obtain adequate paint adhesion, be sure the surface of the product is clean, dry and free of dirt, loose or peeling paint, mildew, chalk, grease and any other surface contaminants before applying paint.

Thanks for reaching out. Yes, this can be used inside a shower stall. Please make sure to use the appropriate paint/finish and make sure all gaps are properly sealed to prevent water from entering into the back of all components. The gaps should be sealed with paintable and/or waterproof caulking or sealant. Correct, the opposite side is a "nickel gap", which is a flat moulding design. The moulding does need to be installed to a smooth, stable, structural wall/ceiling. The installation instructions can found, here: https://images.homedepot-static.com/catalog/pdfImages/1f/1fbfbe75-a158-410b-bd63-725e6daf98af.pdf

Hello Paula, Thank you for your recent inquiry with The Home Depot. This Ekena Millwork 1/2 in. X 96 in. X 7-1/4 in. Expanded Cellular PVC Reversible Beadboard/Nickel Gap Wainscoting Moulding (4 Pack), Unfinished is currently in stock online. It can be ordered online and shipped directly to your home, business, or local store. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376. Thank you for shopping Home Depot.

Thanks for reaching out! Yes, you can use the nickel gap side. One side of this moulding is beadboard (as shown) and the reverse side is nickel gap/shiplap. Either can be used.

No, it is not recommended to be used in a shower above a tub surround.

Joe, height and width are two different things. This answer doesn't help.