#1 Home Improvement Retailer

Internet # 300380322

Model # ST702T1840

Store SKU # 1002099113

4 ft. T8 LED White Strip Light Fixture, 4000K

$3959
Apply Now
Pay $14.59 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • 4 foot T8 LED multi-volt Strip Light fixture in White finish
  • T8 LED tubes use 28W to produce 3,600 Lumens of 4000K light
  • Use in work/utility areas, garages, and light industrial spaces
  • View More Details
Store
0 in stock
caret

Product Details

EnviroLite T8 LED tube strip lights are the perfect solution for commercial lighting needs. These light fixtures are designed to save energy and lower maintenance costs. The LED tubes included use 30% less power to produce the same amount of light as fluorescent fixtures. The LED lamps are a low maintenance solution that eliminates the need to replace wired ballasts and drivers because the power source is in the tube. Because it's LED, you will never hear the hum that fluorescent fixtures make. The tube lamps in this commercial lighting strip provide bright white 4,000K CCT light at (1,800 Lumens per LED lamp). EnviroLite uses quality LED chips that last for 50,000 hours of continuous use The fixture and tubes come with a 5-year warranty. Fixtures are ETL listed and can be installed in damp locations. The T8 LED tube lamps are DLC listed to qualify for commercial lighting rebates and special incentives in certain areas.
  • Designed for large commercial spaces, can be mounted in a continuous row
  • Sturdy construction with protective white enamel finish
  • 2 T8 DLC listed LED tubes (included) uses 28-Watt, produce 4,000K bright white light at 3,600 Lumens
  • ETL listed, suitable for damp locations
  • Fixture has 5-year warranty
  • Accepts 120 to 277-Volt input
  • Noise free
  • Product ships in 2-boxes
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

41Questions
caret
Q:According to the Cordial lighting team, these led lights are dimmable. What dimming control would you recommend?
by|Aug 4, 2023
1 Answer
Answer This Question

A:  Thank you for your inquiry. We apologize for the miscommunication; the fixture is not dimmable.

by|Aug 8, 2023
    1 found this answer helpful
    caret
    Q:Does HD sell bulb for this fixture? This is single-ended fixture.
    by|Jul 26, 2023
    1 Answer
    Answer This Question

    A:  Thank you very much for your inquiry, these bulbs are not sold as a separate item.

    by|Jul 26, 2023
      caret
      Q:What bulb specification is the correct replacement for these? Please give a real answer and not a link.
      by|Jun 12, 2023
      1 Answer
      Answer This Question

      A:  Thank you for your inquiry. 4 foot T8, 120/277 volts, 14 watts, 4000K

      by|Aug 8, 2023
        2 found this answer helpful
        caret
        Q:My existing wiring was installed so each light was hardwired through the top center of the fixture. Will I be able to do the same with this product? See photo.
        by|May 23, 2023
        1 Answer
        Answer This Question

        A:  Thank you for your inquiry. No, knockouts are at the end, refer to the online instructions and video.

        by|May 24, 2023
          Showing 1-4 of 41
          caret

          Customer Reviews

          4.2 out of 5
          (123)
          • 4.2
            out of 123 reviews
          • 79% recommend this product
          Filter by:
          Showing 1-10 of 123 reviews
          Perfect Fit
          The light was easy to install. Directions were simple
          by
          Response from Cordelia Lighting TeamJan 18, 2023
          Thank you very much for your feedback. We appreciate your business. We have received your feedback and it has been forwarded to the proper team. If you should ever need warranty assistance please contact us at info@cordelia.com. CordeliaLighting
          • Verified Purchase
          good price will buy again
          good price will buy again
          by
          • Verified Purchase
          • Recommended
          Nothing fancy, just LED goodness
          This fixture is basically a ready-built retrofit LED fluorescent strip light. That’s good for replacing existing industrial-look strip lights to keep a common theme. It is nothing fancy: basically an old fluorescent metal shell without the ballast inside, and with full feature LED tubes by Espen that do all the magic. The tubes get full 120v main power and have built in circuitry to illuminate the LEDs. I mention all this because there are newer style fixtures that take advantage of what can be done with LEDs meaning much lower profile, etc. But that doesn’t always make sense if you are going with a consistent look. If you want the standard strip light look that’s been popular for over 50 years, these work great. And along with this comes all the benefits of LEDs: less energy, consistent light, fast turn on, low or no noise, low heat. Installation is assisted by a quick connector. This gives you a few assist options when connecting the electric while the fixture is not yet mounted. Otherwise, the fixture can be mounted in various ways as there are many mounting holes and options.
          by
          • Recommended
          9 found this review helpful
          Great strip
          Pretty easy to install just remove one the socket holder in the middle to access the knockout then insert the feed wire into the fixture screw to mounting surface, install all lamp holders make sure you put wired ones in the middle as they are the only ones that have to be wired, wirenut the socket wires to your power supply install the cover plates on fixture then install the lamps. Remember the lamp with the label goes on the power side (middle of fixture) and turn with label up then you are ready to turn of the power an be amazed very bright light. I used above my installation table and lights up the surface very nicely, much better than the 2 lamp T*5's I had there before
          by
          • Recommended
          1 found this review helpful
          Lightweight Basic LED Tube Fixture
          Tube-style fluorescent lights seem to be going the way of the dinosaur, and it couldn’t come sooner. Gone are ballasts that steal efficiency and go bad, the flickering tubes, codes requiring special protection for those fragile tubes in the fixtures, and problems storing the tubes. Then there are the special hazardous disposal requirements. Replacing fluorescents are fixtures of the same look, but with LED bulbs. Among the many advantages are that they consume less energy, and are instant-on full brightness at all temperatures. That leaves two basic options for replacements if you want to use LEDs in same style of light fixture. One is a tube that fits the existing fluorescent fixture with no additional modification. These seem to be fraught with problems in my experience, mostly due to the fact that they are very finicky about the ballasts that they will work with. The other option are tube bulbs where each bulb contains the necessary electronics (internal drivers) to convert the line voltage to the direct current needed for the LEDs to operate. This is the type of bulb included with this fixture and they will operate on any AC voltage from 120 to 277. It is often easier and cheaper to replace the entire fixture than modify the existing one to work with this type bulb. That is what I did with this fixture and it took about 15 minutes, mostly climbing up and down the ladder. This is about as basic of an LED tube fixture that is available. No frills or special design. Made of painted thin 24 gauge sheet metal (maximum), it is not really what I would expect for commercial or industrial use but fine for a residential shop or garage. Designed so that they may be installed end-to-end for as long as you want. No provision included for a cord connection, although you could certainly wire it with one. There is some assembly of the parts, probably to make shipping easier, but it only takes a couple minutes. And don’t loose the tiny clip that holds the channel cover or the whole job will suddenly get more difficult. A word about the tubes: Included with mine were two ecoFlex 4000K light spectrum color tubes made by Espen. These seem to be made of glass, not plastic like some models, which may have benefits such as not deforming in heat, as well as drawbacks such less impact resistance. Too soon to tell how long it will last, but although lightweight, I foresee no problems as long as these are quality bulbs. Time will tell.
          by
          • Recommended
          7 found this review helpful
          Update the shop light
          LED light fixtures are simple to install. Taking down the old heavy, high energy user was a task. Installation was easy I did it myself. Only problem I had was it only came with ends for two tubes as in the picture. I am going to have to go and pick up two ends to finish the installation. they are non powered ends and it only came with two of the four needed. As is I have light and it is bright enough as is for now at least I am not in the dark. 8^)). It actually lit up the room much better.
          by
          • Recommended
          Used Envrolite 4 ft T8' to replace 6' flourscents with good results. Bright lites for one quarter of the electricity. No blast needed. No heat. No breakable glass tubes.
          by
          Response from Cordelia Lighting TeamSep 15, 2023
          This information has been reviewed and received. CordeliaLighting
          • Verified Purchase
          Does exactly what is supposed to do. Easy to assemble and is sufficiently bright.
          by
          Response from Cordelia Lighting TeamAug 16, 2023
          The above review has been received. Thank you CordeliaLighting
            by
              Lamps did not work
              luckily I bought two sets so I had bulbs to swap out. Two of the bulbs did not work.
              by
              Response from Cordelia Lighting TeamJul 28, 2023
              We apologize for the inconvenience you have encountered with this fixture. Thank you very much for your feedback, we will bring up your concerns with our product development team. To obtain replacement bulbs please contact us at info@cordelia.com. CordeliaLighting
                Showing 1-10 of 123 reviews

                Compare Similar Strip Light Fixtures

                current product
                Top Rated4 ft. T8 LED White Strip Light Fixture, 4000K
                4 ft. T8 LED White Strip Light Fixture, 3500K2-Light 8 ft. White Fluorescent Strip Light with 2 T12 Light SocketsTop Rated8 ft. T8 LED White Strip Light Fixture, 5000K
                BrandEnviroLiteEnviroLiteMetaluxEnviroLite
                Name4 ft. T8 LED White Strip Light Fixture, 4000K4 ft. T8 LED White Strip Light Fixture, 3500K2-Light 8 ft. White Fluorescent Strip Light with 2 T12 Light Sockets8 ft. T8 LED White Strip Light Fixture, 5000K
                Price
                $3959
                $4474
                $5097
                Buy 10 or more $45.87
                $11260
                Buy 6 or more $95.71
                Ratings
                (123)
                (25)
                (797)
                (642)
                Compatible Bulb TypeLEDLEDFluorescentLED
                Number of Bulbs Required2224
                View ProductView ProductView ProductView Product