Designed and constructed for maximum utility and ultimate reliability, this easily portable 18-inch Estwing professional tool tote helps carry the tools you need to get work done. This bag is made with rugged 1800D polyester fabric that can hold up to long, hard use on the most demanding job sites. The outside of the bag sports 5 open top pockets, a neoprene self-closing fastener pouch, a zipper secured pocket for small tools and items, a rivet secured steel tape measure clip, and a tension secured hammer holder to provide additional exterior storage. The main compartment has a pair of hook-and-loop secured dividers that can be removed to allow for easier carrying of larger power tools and bulky saws or adjusted to create custom tool storage. The interior floor of the bag is made from a single piece of puncture resistant polyethylene (PE) to keep saw blades and other sharp tools from piercing through the bottom of the tote. Lining the inside are 6 pockets to further help organize stored tools. The outside bottom of the bag also features a hard plastic boot that provides a stable base when the bag is set down while also adding durability and moisture resistance. The included padded shoulder strap features durable steel hardware and makes a convenient way to transport tools to and from the job site.
DURABLE - Constructed of rugged 1800D polyester fabric with top grain leather accents and a stiff PE liner for long lasting durability
2 REMOVABLE DIVIDERS - Two hook-and-loop secured dividers on the inside are removable to allow for larger tools to be stored
NEOPRENE FASTENER POCKET - An overlapping neoprene side pocket securely holds screws, nails, and other fasteners
ZIPPERED POCKET - A zipper secured side pocket provides convenient storage for small tools and parts
SINGLE PIECE FLOOR - Single piece polyethylene interior floor protects against sharp tools and saw blades, preventing punctures
HARD BASE - Bag features a hard plastic exterior bottom that adds stability and moisture resistance
INCLUDED SHOULDER STRAP - Adjustable padded shoulder strap is included for convenient transport to and from the job site
The quality was great but it was missing more pockets...
The quality was great but it was missing more pockets for my trade. The center is like an open bucket. Not much to divide and separate. The design could have been better, and it was bigger than I expected. Good bag for someone else.
Designed and constructed for maximum utilityDesigned and constructed for maximum utility and ultimate reliability, this easily portable 16-inch Estwing carpenter's tool bag brings heavy-duty tool organization and storage to your work site. This bag is made with rugged 1800D polyester fabric that can hold up to long, hard use on the most demanding job sites. The outside of the bag sports 5 pockets, a rivet secured steel tape measure clip, and a tension held hammer holder to provide additional exterior storage. Opening the lid flap reveals 4 zipper secured mesh pockets along its underside that are great for storing fasteners, small parts, and tools while remaining easily visible. The main compartment is completely open, able to hold large or bulky tools with ease. Lining the inside are a total of 8 elastic held pockets to help organize stored tools and items. The interior floor of the bag is made from a single piece of puncture resistant polyethylene (PE) to keep saw blades and other sharp tools from piercing through. The outside bottom of the bag also features a hard plastic boot that provides a stable base when the bag is set down while also adding durability and moisture resistance. The included padded shoulder strap features durable steel hardware and makes a convenient way to transport tools to and from the job site.View Full Product Description
14 in. High Visibility Professional Tool Case Bag
From the Bucket Boss Professional High-VisibilityFrom the Bucket Boss Professional High-Visibility Series, the 14 in. High Visibility Professional Tool bag tool case has 23 total pockets and is built more like a case than a bag, hence the name. Equipped with 3M Scotchlite Reflective that meets ANSI and EN1150 Retro-Reflective worldwide standards for high-visibility and job site safety. Made for the professional, this tool bag is constructed with heavyweight 1680 2-ply poly fabric and boasts a molded, waterproof bottom to protect bag contents. This tool bag also features oversized StayPut handle grips that remain in an upright position, but also an innovative removable, adjustable strap system allowing the tool bag to be worn as a backpack, or tucked behind a cushioned back panel, or be removed altogether. D-Rings allow shoulder strap (not included) to be easily attached to the tool bag case. The front molded grip allows the tool bag to be repositioned easily while sitting upright, allowing the case to be used on a bench as a workstation. The zippered tech-pocket is lined with thick, flexible neoprene and holds up to a 13 inch laptop or tablet. Other features of this high visibility professional tool bag case include a waterproof zipper to keep its 28-liter capacity dry, and 23 total tool pockets - 19 interior pockets and 4 exterior pockets.View Full Product Description
18 in. FlatTop Weather Resistant Tool Bag
The DEAD ON TOOLS 18 in. FlatTop WeatherThe DEAD ON TOOLS 18 in. FlatTop Weather Resistant Tool Bag features an all-terrain bottom to ensure your tools and equipment will stay protected while you are on the job. With 12 interior pockets, this tool bag is sure to store all of your favorite jobsite materials with ease. The removable padded shoulder strap increases functionality by giving complete customization when it comes to transporting this tool bag. And the weatherproof front zippered pocket is perfect for holding your cell phone or small items like car keys or wallets. This tool bag is sure to be the perfect addition to your worksite apparel. Dead On has risen again. We, the DEAD ON TOOLS team, have upgraded our tool rigs and pouches. The iconic DO21C framing hammer is as good as ever. The Annihilator wrecking bar - well, just look at it and you know it means business. The Exhumer nail puller, still the champ. Dead On tool-users don't check their personality when they punch the clock. Our products match that lifestyle, and stand out in a category of commodity products. The Dead On brand and skull logo are about to become icons for those end users.View Full Product Description
14 in. Heavy Duty High Visibility Protech 32-Pocket Tool Bag Backpack
Today, Bucket Boss carries over 100 differentToday, Bucket Boss carries over 100 different products that organize and hold tools in the strongest, most efficient ways. For 30 years, we have prided ourselves in creating durable products that can withstand many years of wear and tear. We strive to stay ahead of the pack by constantly upgrading features and using the best quality materials on the market to create the best product for our end users. From the Bucket Boss Professional High-Visibility Series, the HV ProTech Tool Pack is an absolute working beast. Equipped with 3M Scotchlite Reflective that meets ANSI and EN1150 Retro-Reflective worldwide standards for high-visibility and jobsite safety. Made for the professional, this pack is constructed with heavyweight 1680 2-ply poly fabric, and boasts a molded, waterproof bottom to protect bag contents. Front molded grip allows the bag to be repositioned easily while sitting upright, allowing the pack to be used on a bench as a work station. Zippered tech-pockets on front and back of the bag are lined with thick, flexible neoprene and hold a tablet and up to a 15 in. laptop respectively. Other features include a waterproof zipper to keep its 36 liter capacity dry and oversized StayPut handle grips that remain in an upright position. This bag has 24 total pockets with two specialty zippered, padded pockets for safety glasses and cell phones on the front.View Full Product Description