#1 Home Improvement Retailer

Internet # 205617257

Model # ZE00802A

0.1 HP Non-Submersible Transfer Pump

  • Water transfer utility pump
  • 3/4" garden hose threaded connection
  • Removes water down to 1/8" with suction strainer
  • View More Details
caret

Product Details

The Everbilt portable transfer pump delivers 360 GPH at 0 ft. of lift using a 3/4 in. garden hose threaded connection. The angled inlet and outlet design keeps water lubricating the impeller and significantly increases impeller life. The clear see-through suction hose allows for easy monitoring of the pump performance to avoid running dry for an extended period of time. The brass pump body insert with reinforced high strength plastic pump housing, stainless steel motor shaft and pump cover provided corrosion free resistance. The pump is self-priming up to 9 ft. The kit includes a 6 ft. suction hose, suction strainer, and replacement impellers and brushes. 115-Volt operation.
  • Patented run-dry protector increases impeller life and prevents pump body from overheating
  • Clear see-through suction hose allows for easy monitoring of water movement
  • Suction strainer filters and removes water down to 1/8 in.
  • Angled design keeps water lubricating the impeller
  • For professional technical support call 1-844-241-5521
  • Call 1-844-241-5521 for Installation Help
  • Shop All Everbilt Utility Pumps Here
  • Return Policy
caret

Specifications

caret

Questions & Answers

50Questions
caret
Q:can I use it to transfer 7 quarts of motor oil?
by|Apr 24, 2019
4 Answers
Answer This Question

A:  Hi Joe, This pump should only be used to transfer clear water. Thanks,

by|May 8, 2019

    A:  maybe, you 'll have to prime the pump with oil instead of water, if it works, oil will transfer pretty quick

    by|Apr 25, 2019

      A:  its not really made for that application but it would work. you would have to clean out the lines with a cleaner that would be dissolve the oil in them such as a chlorine based liquid

      by|Apr 24, 2019

      A:  Not certain, but I doubt it. That little motor does well moving water but I think oil would be too think for it to work.

      by|May 12, 2019
      caret
      Q:I need to pump shallow standing water from my basement floor up to window (about 7 ft. up) and ou...
      by|Jan 13, 2019
      6 Answers
      Answer This Question

      A:  The capacity of this pump is probably better suited to smaller jobs.

      by|Jan 13, 2019

      A:  Rusty, This pump should work for you, even if it sucks up a little air it will not loose prime.

      by|Jan 14, 2019

        A:  It should easily manage the 7 foot lift. The flow rate is about 5 gallons per minute, so removing standing water shouldn't be a problem. However, if you have a constant flow of water in, you may need something more powerful to stay ahead of it.

        by|Jan 15, 2019

          A:  I think this pump would work just fine to pump water out of your basement. Pushing water up 7’ and beyond shouldn’t be a problem for this pump.

          by|Jan 13, 2019

          A:  Yes you can, that's exactly what I used mine for. Be sure to get a 25' garden hose to eject it with.

          by|Jan 13, 2019

            A:  It should work, but you may want a stronger one. It would take a while with this. I used it to get the last of the water out of my waterbed when we got a new bladder for it.

            by|Jan 13, 2019
              caret
              Q:can it be used to drain the outside hoses water takes and sprinkler systems?
              by|Nov 25, 2018
              2 Answers
              Answer This Question

              A:  Hi Ray, Yes! Please use the suction screen to ensure that no debris enters the pump and causes damage. Thanks!

              by|Nov 28, 2018

                A:  It should work well in these applications.

                by|Mar 20, 2019
                caret
                Q:Can this pump be used to pump a 40% hydrocloric acid product?
                by|Nov 18, 2018
                2 Answers
                Answer This Question

                A:  Hi Arturo, No, this can not be used for that purpose. The acid will react with the metal in the pump housing. This would be very dangerous and would damage the pump. Thank you!

                by|Nov 26, 2018

                  A:  NO It has metal internal parts.

                  by|Mar 20, 2019
                  Showing 1-4 of 50
                  caret

                  Customer Reviews

                  4.2 out of 5
                  (141)
                  • 4.2
                    out of 141 reviews
                  • 91% recommend this product
                  Filter by:
                  Showing 1-10 of 141 reviews
                  After several days of heavy raining the pump in the collection pit of the ductwork under my found...
                  After several days of heavy raining the pump in the collection pit of the ductwork under my foundation failed. I bought this pump to remove the water. It was super simple to get started and use. The pump very quickly primed itself from a 4 1/2ft rise and pumped out around 1500 gallons of water in under 45 minutes. I am very happy with my purchase.
                  by
                    • Recommended
                    The pump came mostly assembled. Great transfer pump for CNC machine coolant.
                    The pump came mostly assembled. Great transfer pump for CNC machine coolant.
                    by
                    • Verified Purchase
                    • Recommended
                    I have been using this pump for non stop use and it has performed well. I really like that the u...
                    I have been using this pump for non stop use and it has performed well. I really like that the unit comes with a spare impeller. A good all round pump.
                    by
                    • Verified Purchase
                    • Recommended
                    3 found this review helpful
                    I'm using this as a transfer pump. It works great every time.
                    I'm using this as a transfer pump. It works great every time.
                    by
                    • Verified Purchase
                    • Recommended
                    2 found this review helpful
                    Awesome pump
                    This pump was pretty easy to use and had great power behind it. Really sad to see it's not available and wish it was back on the market.
                    by
                      • Recommended
                      Works great so far ....
                      Works great so far .
                      by
                      • Verified Purchase
                      Rating provided by a verified purchaser...
                      Rating provided by a verified purchaser
                      by
                      • Verified Purchase
                      Good for de-scaling Navien water heater
                      This pump was purchased to facilitate the de-scaling of my Navien NR-180A on-demand water heater. (small submersible pumps are usually recommended for this application but I have concerns about using a submersible pump in an acidic environment.) I have successfully used this pump twice and these are my observations and recommendations. The box states the pump comes with a spare impeller, brushes and o-ring. My box came with a small bag containing the above noted items; however, when I went to use the pump the first time there was no water flow, even with priming. After removing the pump cover plate, I discovered the pump head had no impeller. So I installed my "backup impeller" in the pump after lubricating it with food grade silicone grease. I had to determine the direction of rotation so as to install the impeller with the vanes pointed in a trailing direction. After adding a small amount of water to the inlet port to prime the pump, it preformed well in a test using a 5 gallon bucket and tap water after placing the intake and output hoses in the same bucket. After I was convinced the pump was working ok, I emptied the tap water and refilled the bucket with 4 gallons of white vinegar. The pickup foot was placed in the bucket and the outlet and return hose were connected to the heater following water heater's manufacturers instructions. (Several videos are available on YouTube with details of this process.) The pump flow and pressure seems adequate for this application but I suggest securing the hoses to the bucket with clamps to avoid the hoses moving out of place. This pump is very loud but once setup it can be left unattended for the run time with occasional monitoring. (Do not let this pump run 'dry' as the moving liquid cools the impeller and avoids premature failure of the pump) The pump is self-priming however priming the pump will save premature wear and tear on the impeller. I remove and lubricate the impeller after each use because of the long intervals between uses and I don't want the impeller to take a set in the housing. I checked the brushes after two one hour descaling sessions and they are just now seating well without signs of wear. The pump head appears to be performing well with no observed ill effects from the vinegar. Note: there are two iron bars in the pick-up foot which are meant to help hold the inlet housing flat however in the acidic solution for my application the bars rusted almost immediately. Even to the point of flaking off large rust flakes. If these get trapped in the water heater, they can be released later into your water lines. I know this happened because I found rust particles on the inlet screens of my fixtures. I coated the iron bars with liquid vinyl electrical tape so this should no longer be a problem. I clean all fixture inlet screens or filters after each de-scaling session. This little pump works well for this application and I will continue to use this pump to de-scale and flush the water heater every 6-12 months. These are just my experiences and observations and are not meant has a guide for this application by anyone else. 
                      by
                        • Recommended
                        This is my 2nd pump in 10 years. I purchased...
                        This is my 2nd pump in 10 years. I purchased the same pump. It pumps water quickly and efficiently. Very reliable!
                        by
                        • Verified Purchase
                        5 Star Review
                        Rating provided by a verified purchaser
                        by
                        • Verified Purchase
                        Showing 1-10 of 141 reviews

                        Compare Similar Transfer Pumps

                        1/10 HP 115-Volt Non-Submersible Transfer Pump
                        current product
                        0.1 HP Non-Submersible Transfer Pump
                        1/10 HP. Transfer Pump with Flexible Impeller Non-Submersible1/2 HP Transfer Pump
                        BrandSuperior PumpEverbiltK2K2
                        Name1/10 HP 115-Volt Non-Submersible Transfer Pump0.1 HP Non-Submersible Transfer Pump1/10 HP. Transfer Pump with Flexible Impeller Non-Submersible1/2 HP Transfer Pump
                        Price
                        $8666
                        $8820
                        $10192
                        $16999
                        Ratings
                        (55)
                        (0)
                        (10)
                        (19)
                        Power TypeElectricElectricElectricElectric
                        Voltage115v115v115v115v
                        Discharge Flow @ 0 ft. (gallons/hour)3303603601350
                        Impeller MaterialThermoplasticThermoplasticRubberThermoplastic
                        Housing MaterialSteelThermoplasticOtherCast-Iron
                        View ProductView ProductView ProductView Product