![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Everbilt | Everbilt | Everbilt |
Name | 3/4 in. x 96 in. x 0.05 in. Aluminum Thick Angle | 1-1/2 in. x 36 in. Aluminum Angle with 1/8 in. Thick | 1 in. x 96 in. Aluminum Flat Angle with x 1/8 in. Thick | 2 in. x 96 in. Aluminum Angle with 1/16 in. Thick |
Price | $1128 | $1628 | $2838 | $2948 |
Ratings | (65) | (118) | (118) | (56) |
Product Thickness (in.) | 0.75 in | 0.12 in | .125 in | 0.06 in |
Product Length (in.) | 96 in | 36 in | 96 in | 96 in |
Product Width (in.) | 0.75 | 1.5 | 96 | 2 |
Slotted | Unslotted | Unslotted | Unslotted | Unslotted |
Material | Aluminum | Aluminum | Aluminum | Aluminum |
Finish Family | Silver Metallic | Silver Metallic | Silver Metallic | Silver Metallic |
Indoor/Outdoor | Indoor/Outdoor | Indoor/Outdoor | Indoor/Outdoor | Indoor/Outdoor |
Type | Bar | Bar | Unslotted flat | Bar |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Everbilt | Everbilt | Everbilt |
Name | 3/4 in. x 96 in. x 0.05 in. Aluminum Thick Angle | 1-1/2 in. x 36 in. Aluminum Angle with 1/8 in. Thick | 1 in. x 96 in. Aluminum Flat Angle with x 1/8 in. Thick | 2 in. x 96 in. Aluminum Angle with 1/16 in. Thick |
Price | $1128 | $1628 | $2838 | $2948 |
Ratings | (65) | (118) | (118) | (56) |
Product Thickness (in.) | ||||
Product Length (in.) | ||||
Product Width (in.) | ||||
Slotted | ||||
Material | ||||
Finish Family | ||||
Indoor/Outdoor | ||||
Type | ||||
View Product | View Product | View Product | View Product |
Thank you for inquiring about the Everbilt 1 in. x 96 in. Aluminum Flat Angle with x 1/8 in. Thick. This item is sold as a single unit. We apologize for the inconvenience as we are experiencing technical difficulties with our data on HomeDepot.com. Our team is working to correct the issue.
Pictures of suggested examples are not available.
I do not think they cut this material. However, they cut black iron pipe to length. So, you might see if an associate might go out of his way to do that for you. Actually this material cuts easily with a standard hacksaw.
We are unable to provide this information as the product is not tested for weight/load limits.
Yes i believe so! Higher grade Aluminum
Hacksaw and grinder to smooth edges
Pure aluminum is corrosion-resistant due to its natural tendency to form a very thin, protective, hydrated aluminum oxide film on surfaces exposed to air. However, water with a lower pH (more acidic) may attack some aluminum alloys, and water with higher pH (more basic) will attack all aluminum alloys. Therefore when contacted with water there would be black spots/oxidation when in natural state. The profile would need to be anodized or power coated to make it fully water resistant.
The grade of aluminum alloy is 6063-T5.
Never tried but it's only aluminum so I imagine so
The aluminum is grade 6063-T5 .