1-1/2 in. x 48 in. Bright Nickel Continuous Hinge

Hi Home Depot Customer, The screws included with the Everbilt 1-1/2 in. x 48 in. Bright Nickel Continuous Hinge are #6 x 5/8 inch.

Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is,You can cut any size that you need. The material is steel and thickness is 0.031-in.

Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is,The Everbilt 1-1/2 in. x 48 in. Bright Nickel Continuous Hinge is not recommended for outdoor use, as it is designed for interior applications. Therefore, it would not be suitable for a shed door and is not considered rust-proof for outdoor conditions.

Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is,The material is steel and the thick is only0.031-in.

Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is,The product details available do not specify if the hinges allow for 270-degree rotation. For such specific technical details, I recommend checking the product page on The Home Depot website directly or contacting customer support for further assistance. You can reach customer support by texting "Support" to 38698 or calling 1-800-430-3376.

Dear Valued Home Depot Customer, We have reached out to the manufacturer and their reply is, The height of hinge is 0.21 in ,please have the depth around the height.

The product includes screws. [This answer was generated by AI and verified by product experts.]

It is not recommended to MIG weld a nickel-finished continuous hinge directly to a mild steel weldable frame. Here are the reasons and alternatives: ### Reasons: 1. **Nickel Finish**: The nickel finish on the hinge can interfere with the welding process, potentially causing poor weld quality and contamination. 2. **Material Compatibility**: The hinge is made of steel, but the nickel coating can create issues when welding to mild steel. ### Alternatives: 1. **Remove Nickel Finish**: If you must weld, you can remove the nickel finish from the areas to be welded using a grinder or sandpaper. This will expose the bare steel underneath, which can then be welded to the mild steel frame. 2. **Mechanical Fasteners**: Instead of welding, consider using screws, bolts, or rivets to attach the hinge to the frame. This method avoids the complications associated with welding different materials and finishes. 3. **Specialized Adhesives**: High-strength industrial adhesives designed for metal bonding can also be used to attach the hinge to the frame. ### Steps to Remove Nickel Finish: 1. **Safety Gear**: Wear safety goggles, gloves, and a mask to protect yourself from metal dust. 2. **Grind/Sand**: Use a grinder or sandpaper to remove the nickel finish from the areas to be welded. 3. **Clean Surface**: Clean the exposed steel surface thoroughly to remove any residue or contaminants. 4. **Weld**: Proceed with the MIG welding process on the cleaned steel surfaces. ### Example: 1. **Grind the Nickel Finish**: Use a grinder to remove the nickel coating from the hinge where it will be welded. 2. **Clean the Surface**: Wipe the exposed steel with a clean cloth and a suitable cleaner to remove any dust or grease. 3. **Weld**: Perform the MIG welding on the cleaned steel surfaces. By following these steps, you can ensure a better weld quality and avoid potential issues related to the nickel finish. [This answer was generated by AI and verified by product experts.]