Internet #205153628

Model #C9792

Store SKU #1000050269

1-1/2 in. x 6 in. White Plastic Slip-Joint Sink Drain Tailpiece Extension Tube

  • Use to extend sink drain or bath tub drain
  • Includes a leak-tight washer
  • Constructed with an impact resistant polypropylene plastic
  • See More Details

Frequently Bought Together

+
+
Price:
$297

Product Overview

Plastic tubing underneath kitchen sink

Kitchen

Kitchen tubular products are available in 1-1/2” options and include p-traps, s-traps, j-bends, waste arms, extension tubes, and escutcheon plates.

Plastic tubing underneath bathroom sink

Bath

Bathroom tubular products are available in 1-1/4” options and include p-traps, s-traps, j-bends, waste arms, extension tubes, and escutcheon plates.

Plastic tubing underneath bathroom sink

General Tubular

Complete your kitchen or bathroom sink drain install project with Everbilt's expansive assortment of brass, plastic, and commercial drain products.

1-1/2" Kitchen

1-1/2" For Kitchen

1-1/2" tubular is suitable for kitchen sink drain applications.

1-1/4" Bathroom

1-1/4" For Bathroom

1-1/4" tubular is suitable for bathroom sink drain applications.

Polypropylene plastic tubing underneath kitchen sink

Plastic Tubular

Constructed of durable, impact-resistant polypropylene plastic.

Chrome-plated tubing underneath kitchen sink

Chrome-Plated Tubular

Constructed of a chrome-plated brass that will not corrode or oxidize.

Chrome-plated tailpiece

Tailpiece

Includes required hardware to allow for a quick and easy connection between the sink drain and garbage disposal.

Plastic wall tube

Wall Tube

Allows for a quick and easy installation by connecting the sink drain with the p-trap.

Chrome pop-up drain assembly

Pop-Up Assembly

Includes required hardware for an easy to assemble pop-up drain.

Plastic p-trap

P-Trap

Includes required hardware for an easy installation that keeps sewer gases from coming up the sink drain.

Chrome escutcheon plate

Escutcheon

Hides the hole that the kitchen sink drain pipe runs through, and offers utility while adding an elite look.

Plastic slip joint

Slip Joint Nut

Slip joint design makes it easy to create a watertight seal on to p-trap.

Use the 1-1/2 in. x 6 in. Polypropylene Slip-Joint Extension Tube for tubular-drain applications. This extension tube is made out of polypropylene for durability. Available in black or white polypropylene plastic. Leak tight washer included.
  • White finish
  • Meets ASTM F 409
  • IAPMO listed
  • Easy installation
  • 6 in. L
  • Durable poly material
  • Click here to learn more about how to replace a sink drain trap.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Assembled Depth (in.)
6.25 in
Assembled Height (in.)
2.75 in
Assembled Width (in.)
2.75 in
Product Depth (in.)
2.7
Product Height (in.)
6.181102362204725
Product Width (in.)
2.283464566929134 in

Details

Application
Kitchen Sink
Color Family
White
Color/Finish
White
Finish
White
Material
Polycarbonate
Pack Size
1
Plumbing Part Type
Extension
Returnable
180-Day
Strainer Included
No

Warranty / Certifications

Manufacturer Warranty
1 year

Questions & Answers

10Questions16Answers

I bought a Everbilt 1-1/4 in. Pop-Up Assembly Model# C759-1. Its metal tail piece is 4 inches lo...

Asked by Minoura June 25, 2018
3
Answers

You are correct, but you might find that the overall combined length is too long to fit into the p-trap assembly. Don't worry. You can cut the extra off either the extension or the pop-up (or a little bit from both) or you can unscrew the metal tail with a little effort and replace it with one of the appropriate length. You might have order it at the customer service desk or go to a plumbing supply to get one as it is not an item that sells in sufficient quantity for HD to stock. The advantage is small. 1) It looks nicer and 2) fewer joints (and potential leaks).

Will this work with the black ABS pipe? Are the ID and OD compatibile?

Asked by JA November 27, 2019
2
Answers

They are compatible.

Do you have one like this with drain stopper pin (lever) installed so that I can open and close t...

Asked by Jim December 24, 2017
2
Answers

That's called a Pop-up. It's a different item. Typically they are 1 1/4" in diameter and used in a bathroom sink.

Does this come with a 1 1/4" reducing washer?

Asked by Ewc February 23, 2017
2
Answers

No reducing washer is included.

Does this need glue to connect to another piece?

Asked by ColoradoPlumber January 11, 2019
2
Answers

No glue needed. Pipe is sealed via compression nut.

Can I use the extension horizontally to add length to the trap arm? I need more length from the w...

Asked by Rooster June 2, 2020
1
Answer

Yes, absolutely. I've done it many times rather than making another trip to the store. It IS one extra joint (and potential leak) in the run, but it's done all the time.

Is this 1-1/2" OD?

Asked by stevie September 22, 2020
1
Answer

Yes.

Can you just attach this to copper?

Asked by Ohn January 12, 2020
1
Answer

No this is not recommended.

came up a couple inches short with the water supply lines from the sink to the main supple. Is th...

Asked by drummer July 6, 2020
1
Answer

This product is an extension for 1-1/2" tubular pipe. Oatey does not carry extensions for water supplies.

what is the minimum extension this will do?

Asked by Jeffrey December 28, 2019
1
Answer

This is 6" in length.

1-1/2 in. x 6 in. White Plastic Slip-Joint Sink Drain Tailpiece Extension Tube - page 2

Customer Reviews

  • 61 Customer Reviews
  • 4.6 out of 5 stars overall
88% of customers recommended.
Overall Ratings
5star-icon(47)
4star-icon(8)
3star-icon(2)
2star-icon(2)
1star-icon(2)
Sort By:
Worked perfect to extend my new faucet to the P Trap
Ease of installation :
5
Quality :
5
Value :
5
Worked perfect to extend my new faucet to the P Trap
Was this helpful?
1
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Worked great. Needed a little extra length from the sink...
Worked great. Needed a little extra length from the sink drain pipe to the P trap and this fit the bill. I did have to saw off a few inches because it was a bit too long but it wasn’t difficult.
Was this helpful?
0
0
This was the perfect solution to the drain pipe on...
This was the perfect solution to the drain pipe on my new Delta faucet not quite reaching the old P-trap. A breeze to install. Highly recommended.
Was this helpful?
0
0
Great products. Works very well and easy to put...
Great products. Works very well and easy to put together with other Everbilt parts
Was this helpful?
0
0
worked perfectly, icing on the cake of new faucet...
worked perfectly, icing on the cake of new faucet install
Was this helpful?
0
0
Installed a new vanity that is 4 inches taller than the old one. Used this to extend the tailpipe...
Ease of installation :
5
Quality :
5
Value :
5
Installed a new vanity that is 4 inches taller than the old one. Used this to extend the tailpipe. Perfect fit and no leaking on first try. Glad pieces like this are available. Made the job very easy.
Was this helpful?
2
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
did exactly what it was supposed to do...
did exactly what it was supposed to do
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers