#1 Home Improvement Retailer

Internet #315023083

Model #HDSP50W

Store SKU #1006013668

1/2 HP Aluminum Sump Pump Tether Switch

$14900
Apply Now
Save up to $100 on your qualifying purchase.
Apply for a Home Depot Consumer Card
  • Submersible sump pump ensures quiet operation
  • Aluminum motor housing provides effective motor cooling
  • Equipped with thermal overload protection for safe use
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

Exclusive
+
+
Price:
$14900

Product Overview

The Everbilt 1/2 HP Submersible Sump Pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection. The pump comes with a 1-year limited warranty.
  • Aluminum motor housing for efficient motor cooling
  • Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint; higher efficiency using less energy to operate
  • 8.25 ft. cord length
  • Submersible for quiet operation
  • 1-1/2 in. FNPT discharge
  • Semi-open thermoplastic impeller passes 3/8 in. solids
  • Pumps up to 3180 GPH at 10 ft., outperforms the competition
  • Shop All Everbilt Sump Pumps Here
  • Click here for more information on Electronic Recycling Programs
  • California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Submersible Sump Pumps

current product
Exclusive1/2 HP Aluminum Sump Pump Tether Switch
Exclusive1/3 HP Cast Iron Sump Pump3/4 HP Submersible Sump PumpExclusive3/4 HP Pro Snap Action Sump Pump
BrandEverbiltEverbiltWayneEverbilt
Name1/2 HP Aluminum Sump Pump Tether Switch1/3 HP Cast Iron Sump Pump3/4 HP Submersible Sump Pump3/4 HP Pro Snap Action Sump Pump
Price
$15900
$17900
$19499
$28900
Ratings
(7)
(308)
(1178)
(137)
Housing MaterialAluminumCast-IronStainless steelCast-Iron
Discharge Flow @ 0 ft. (gallons/hour)4080351043006000
Impeller MaterialPlasticPlasticThermoplasticCast Iron
Voltage115v115v120v115v
Power Type RequiredACACACAC
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)6.3 inProduct Height (in.)10.63 in
Product Width (in.)8.27 inSwitch-Off Height (in.)3.94
Switch-On Height (in.)11.81

Details

Amperage (amps)7.0 ACord Length (ft.)8.25
Discharge Flow @ 0 ft. (gallons/hour)4080Discharge Flow @ 0 ft. (gallons/min)68
Discharge Flow @ 10 ft. (gallons/hour)3180Discharge Flow @ 10 ft. (gallons/min)53
Discharge Flow @ 15 ft. (gallons/min)43FeaturesBottom/End Suction,Non-Clogging,Self-Priming,Solids Handling,Submersible,Thermal Overload Protection
Housing MaterialAluminumImpeller MaterialPlastic
Maximum Horsepower (hp)1/2Maximum Pressure (psi)10.82
Maximum Working Temperature (F)100Minimum Sump Basin Diameter11 to 14
Minimum working temperature (F)35Outlet Diameter Connection (in.)1-1/2 FPT
Pack Size1Power Type RequiredAC
Product Weight (lb.)8.82 lbPump Switch TypeTethered
Pump Switch TypeTetheredReturnable90-Day
Vertical Lift (ft.)25Voltage115v

Warranty / Certifications

Certifications and ListingsCSA CertifiedManufacturer Warranty1 year

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.2
    out of 7 reviews
  • 80%recommend this product
Filter by:
Showing 1-7 of 7 reviews
Performs as Advertised
I had a basement water seepage problem and thought I would need this pump. Turns out I was able to completely solve the problem by clearing a perimeter drain that had been covered by lanscapers some years ago. Anyway, I tested the pump for capabilities. Here is what I found. I would probably have done this before tearing out concrete anyway. The test consisted of placing sump pump in a five-gallon bucket and attaching 7 feet of 1-1/4 inch PVC pipe to a 1-1/4 inch PVC male threaded to female slip fitting (see photo). The bucket was filled with water and then the pump plugged into 120 volt power (see photo). Plenty of pumping power and quieter than I expected especially since there was no tank cover. See photo of water from top of PVC pipe. As far as construction, the design seems well done. The PSC (Permanent Split Capacitor) Motor starts smoothly but I am not sure about the claim of high efficiency. It should not be a big deal in most applications since you would not think of this as anywhere near a continuous duty motor or one that runs for long cycles. Annual operating cost should be modest compared to appliances. Be sure to follow recommendations for tank size to accommodate the swing action of the float switch. Keep in mind this is for storm water or other relatively clean water and not sewage although it will handle smaller solid particles. Pretty good value. Consider that I am stingy with stars when you view my rating. (Note: 5 stars reserved for exceptional products.)
by
Response from Everbilt Customer ServiceNov 18, 2021
Engr4you, thank you for your review. Yes, this is a great pump for a sump application. The basin size is important when choosing this pump, due to the tethered float switch. We are glad that you were able to fix your issue. If you need anything, please feel free to contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
  • Recommended
Great product
I needed a pump to empty my hot tub. I bought this ans the hose kit for this size pump. what a great job down to last few inches in 10 minutes. finished off with my wet vac.
by
Response from Everbilt Customer ServiceMay 16, 2022
Dynamite, thank you for your review. This pump works fast and moving water. If you have any other questions or concerns, please feel free to contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
    it was not able to perform a lift of 10'....
    it was not able to perform a lift of 10'. it finally began tripping the breaker. I will need to return it. I bought a different unit in it's place
    by
    Response from Everbilt Customer ServiceMar 16, 2022
    Robert, I am sorry to hear you had issues with this pump. It almost sounds like there is more of an issue with the impeller. Whether something is clogging it or it, unfortunately, is not working properly. If you have any questions, please feel free to contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
    • Verified Purchase
    by
    • Verified Purchase
    Sump Pump to Drain Pool!
    I picked up this Everbilt 1/2 HP Aluminum Sump Pump Tether Switch to use for multiple applications. I plan to use this in the spring to drain my 20,000 gallon pool to allow me to pressure wash and acid wash my pool. I’m going to need to buy some hose to run approximately 125-150 feet to my sewage drain to complete the job. I anticipate this thing knocking out the job without an issue.
    by
    Response from Everbilt Customer ServiceNov 19, 2021
    JjR450, thank you for you review. If you have any questions or concerns, please contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
    • Recommended
    Works great
    If you need a strong sump pump this the beast for you. After some heavy rain my neighbor had water filling up his basement. Went to HD and bought the hose we needed to run the water outside. Used a couple of clamps to attach to unit and out it goes. Highly recommended. Easy to hook up with proper tools . Going to need it in the spring time to help control some flooding
    by
    Response from Everbilt Customer ServiceNov 15, 2021
    Thank you for your review. This is a great pump for your sump pump needs. It is very easy to install and use. We are so glad that you are satisfied with your pump. If you need anything please contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
    • Recommended
    It’s a “horse”
    Wow this pump can move some water. Our previous one was a 1/3 hp and did an acceptable job. But this one blows the socks off of it. Unit has standard discharge coupling for easy hookup. Float/tether moves freely just make sure there’s enough room in your pit. Might need to turn it for repositioning. Cord is ~6’ long to reach to the respective outlet. Only downside is that it’s slightly raised from pit bottom ~1” so there’ll always be a little water in the bottom. But this unit will definitely keep up with most any flow.
    by
    Response from Everbilt Customer ServiceNov 15, 2021
    CraigA, thank you for your review. This is a great little pump and will get the job done. We are so glad that you are satisfied with this pump. If you ever need anything, please contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
    • Recommended
    Showing 1-7 of 7 reviews