Internet #308370051

Model # SPL05003-LQ

Store SKU #1004162175

Store SO SKU #1004108767

1/2HP Pedestal Sump Pump

$ 187 00

Overview

The Everbilt 1/2HP pedestal pump is designed to replace an existing pedestal pump. This powerful pump moves up to 3,420 GPH at 10 ft. of lift. The pump is made with a heavy-duty cast iron base and a stainless steel column. The pump comes completely assembled for easy installation. The innovative float design is protected by the motor assembly. The adjustable float allows for easy adjustment to change the operating cycle. The top handle can be used for easy movement and unpacking. The heavy-duty, high efficiency permanent split capacitor motor has a thermal overload protector. The pump has a 1-1/4 in. NPT discharge, and is supplied with an 8 ft. power cord. The pump will fit into a 12 in. in diameter sump basin. The pump has a 1 year warranty.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

The Everbilt 1/2HP pedestal pump is designed to replace an existing pedestal pump. This powerful pump moves up to 3,420 GPH at 10 ft. of lift. The pump is made with a heavy-duty cast iron base and a stainless steel column. The pump comes completely assembled for easy installation. The innovative float design is protected by the motor assembly. The adjustable float allows for easy adjustment to change the operating cycle. The top handle can be used for easy movement and unpacking. The heavy-duty, high efficiency permanent split capacitor motor has a thermal overload protector. The pump has a 1-1/4 in. NPT discharge, and is supplied with an 8 ft. power cord. The pump will fit into a 12 in. in diameter sump basin. The pump has a 1 year warranty.
  • Used for residential application where space is an issue
  • 8 ft. power cord with grounded plug
  • Easy to install
  • Designed to fit into a 12 in. in diameter sump basin
  • Corrosion resistant construction
  • 1-year limited warranty is provided

Product Overview

Model #: SPL05003-LQ
Sku #: 1004162175
Internet #: 308370051

The Everbilt 1/2HP pedestal pump is designed to replace an existing pedestal pump. This powerful pump moves up to 3,420 GPH at 10 ft. of lift. The pump is made with a heavy-duty cast iron base and a stainless steel column. The pump comes completely assembled for easy installation. The innovative float design is protected by the motor assembly. The adjustable float allows for easy adjustment to change the operating cycle. The top handle can be used for easy movement and unpacking. The heavy-duty, high efficiency permanent split capacitor motor has a thermal overload protector. The pump has a 1-1/4 in. NPT discharge, and is supplied with an 8 ft. power cord. The pump will fit into a 12 in. in diameter sump basin. The pump has a 1 year warranty.

  • Used for residential application where space is an issue
  • 8 ft. power cord with grounded plug
  • Easy to install
  • Designed to fit into a 12 in. in diameter sump basin
  • Corrosion resistant construction
  • 1-year limited warranty is provided

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Key Features

Product Overview
Key Features
The Everbilt 1/2HP pedestal pump is designed to replace an existing pedestal pump. This powerful pump moves up to 3,420 GPH at 10 ft. of lift. The pump is made with a heavy-duty cast iron base and a stainless steel column. The pump comes completely assembled for easy installation. The innovative float design is protected by the motor assembly. The adjustable float allows for easy adjustment to change the operating cycle. The top handle can be used for easy movement and unpacking. The heavy-duty, high efficiency permanent split capacitor motor has a thermal overload protector. The pump has a 1-1/4 in. NPT discharge, and is supplied with an 8 ft. power cord. The pump will fit into a 12 in. in diameter sump basin. The pump has a 1 year warranty.
  • Used for residential application where space is an issue
  • 8 ft. power cord with grounded plug
  • Easy to install
  • Designed to fit into a 12 in. in diameter sump basin
  • Corrosion resistant construction
  • 1-year limited warranty is provided

Product Overview

Model #: SPL05003-LQ
Sku #: 1004162175
Internet #: 308370051

The Everbilt 1/2HP pedestal pump is designed to replace an existing pedestal pump. This powerful pump moves up to 3,420 GPH at 10 ft. of lift. The pump is made with a heavy-duty cast iron base and a stainless steel column. The pump comes completely assembled for easy installation. The innovative float design is protected by the motor assembly. The adjustable float allows for easy adjustment to change the operating cycle. The top handle can be used for easy movement and unpacking. The heavy-duty, high efficiency permanent split capacitor motor has a thermal overload protector. The pump has a 1-1/4 in. NPT discharge, and is supplied with an 8 ft. power cord. The pump will fit into a 12 in. in diameter sump basin. The pump has a 1 year warranty.

  • Used for residential application where space is an issue
  • 8 ft. power cord with grounded plug
  • Easy to install
  • Designed to fit into a 12 in. in diameter sump basin
  • Corrosion resistant construction
  • 1-year limited warranty is provided

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Maximum Pumping Height (ft.)
22
Product Depth (in.)
6.97 in
Product Height (in.)
32.6 in
Product Width (in.)
9.25 in
Switch-Off Height (in.)
4.7
Switch-On Height (in.)
12.6

Details

Amperage (amps)
4 A
Cord Length (ft.)
8
Discharge Flow @ 0 ft. (gallons/hour)
4600
Discharge Flow @ 10 ft. (gallons/hour)
3420
Discharge Flow @ 15 ft. (gallons/hour)
2400
Features
Corrosion Resistant
Housing Material
Stainless steel
Maximum Horsepower (hp)
.5
Maximum Working Temperature (F)
77
Minimum working temperature (F)
32
Power Type Required
AC
Product Weight (lb.)
21.64 lb
Pump Switch Type
Vertical
Returnable
90-Day
Sump Pump Outlet Diameter Type
1-1/2 MPT x 1-1/4 FPT
Voltage
115v

Warranty / Certifications

Certifications and Listings
CSA Listed
Manufacturer Warranty
1 Year

Specifications

Dimensions

Maximum Pumping Height (ft.)
22
Product Depth (in.)
6.97 in
Product Height (in.)
32.6 in
Product Width (in.)
9.25 in
Switch-Off Height (in.)
4.7
Switch-On Height (in.)
12.6

Details

Amperage (amps)
4 A
Cord Length (ft.)
8
Discharge Flow @ 0 ft. (gallons/hour)
4600
Discharge Flow @ 10 ft. (gallons/hour)
3420
Discharge Flow @ 15 ft. (gallons/hour)
2400
Features
Corrosion Resistant
Housing Material
Stainless steel
Maximum Horsepower (hp)
.5
Maximum Working Temperature (F)
77
Minimum working temperature (F)
32
Power Type Required
AC
Product Weight (lb.)
21.64 lb
Pump Switch Type
Vertical
Returnable
90-Day
Sump Pump Outlet Diameter Type
1-1/2 MPT x 1-1/4 FPT
Voltage
115v

Warranty / Certifications

Certifications and Listings
CSA Listed
Manufacturer Warranty
1 Year

Questions & Answers

How do you adjust the float height? There is nothing in the manual that explains how to adjust it.

Asked by: BillHall2
The lock collars on the float rod are secured with a hex screw. Loosen the screw to allow your adjustment of the lock collars. Re-tighten the screws.
Answered by: JeffersonOh
Date published: 2019-08-31
  • y_2019, m_10, d_16, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_308370051, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • QUESTIONS, PRODUCT

Customer Reviews

Everbilt 1/2HP Pedestal Sump Pump is rated 4.3 out of 5 by 10.
Rated 4 out of 5 by from This simple design pedestal pump from Everbilt is equipped with a ½ hp motor. The base pump is threaded to accept a 1-½” discharge pipe. It also includes a 1-½” x 1-¼” plastic adapter if required. Discharge flow rating on this pump varies from 10 gpm to 76 gpm, depending on lift. An average lift of 10 feet for the typical basement application should yield approximately 55 gpm per pump specs. The pump is easy to assemble and install. An 1/8” hole should be drilled at the base of the discharge pipe to prevent air lock when pump shuts off. Also required is a check valve to be installed in the vertical section of the discharge to prevent your sump from refilling when the pump shuts off. I would recommend manually moving the float switch up and down before installation to check that it moves freely through the support clip, you may have to swivel it slightly so it does not bind due to misalignment from shipping.
Date published: 2019-09-02
Rated 5 out of 5 by from i ordered this Everbilt pedestal sump pump to have on hand to replace my 40 year old pump when ev... i ordered this Everbilt pedestal sump pump to have on hand to replace my 40 year old pump when ever it finally decides to quit. i was impressed with how this pump was made, it is very heavy, has a stainless steel column and a cast iron base and is built to last. it is described as a replacement pump and has many good features including 1/2 hp motor that can pump 57 GPM, an adjustable float, can be installed using 1 1/4 or 1 1/2 inch pvc discharge pipe and is made to fit sump pits 12 inches in diameter or larger. it comes with a use and care guide that has complete instructions but also has a quick start guide that would make installation very easy by using it. this seems to be a quality product that should give many years of service and i am glad i chose this pump over the cheaper available models.
Date published: 2019-08-28
Rated 5 out of 5 by from I generally have to replace my pedestal sump pump every 4 to 5 years. It’s do. So I’m purchasing this one ahead of time to be prepared. I decided to step up the 1/2 HP from of the 1/3 HP and to purchase a name brand. It comes with a heavy duty lifting ring on the top. It seems pretty well balanced so it should lift straight up on out of the pit. I did notice the guide arm, for the float, that clamps onto the main post moves when I touched it, the screw that holds it in place is tight. Also if I try to line the float rod going through the guide so it’s straight up and down it causes the switch to stick in the on position so I left it at an angle. I hope this doesn’t cause any problems when I do install it. I also hope to get a lot more time out of this one.
Date published: 2019-08-28
Rated 4 out of 5 by from I got this unit with a plan to install it in my basement. I had not had the chance to put a reta... I got this unit with a plan to install it in my basement. I had not had the chance to put a retaining bin yet in the ground so it wasnt in. However, I was able to put this to the test this week due to a Huricane coming through. We had water in the base of one of our restaurants. I wanted to get water moving out as fast as possible and at first thought I would have to make a retaining pool or something. I ended up just setting this in the water and connecting a hose to this unit. The float works really well and is adjustable. The unit is steel and cast so it is very solid. I set the unit in the low point in the yard and this thing pumped for about 2 hours - it saved our building
Date published: 2019-09-10
Rated 3 out of 5 by from I live in a high water table area, so my sump system is busy daily. I have gone through my share ... I live in a high water table area, so my sump system is busy daily. I have gone through my share of sump pumps in the 22 years I have lived here. This pump hands down is the quietest I have installed. Huge plus. Plenty of weight to it, which is critical for a pedestal pump in order to help keep it from moving and flexing the discharge system. I really like this pump but it has design quirks.. First, the discharge pipe is only 1/16th to 1/8 inch from the motor. I added a piece of rubber around the stem to prevent the motor and discharge pipe from touching. Second, the float/trigger switch stem, which allows the float to go up and down, has lock collars to set the limits of the float. The lock collars are secured with a hex screw. I found this really annoying to adjust the float to your water depth. Lastly, the float assembly is on the side of the motor, which creates a triangulation of the sump, discharge system and float switch assembly. Now my sump lid will not fit. Out of the half dozen or so pedestal pumps I have used over the years, this is a first. The packaging cover indicates the float is adjustable, but there is no procedure within the instruction booklet. I could not find who manufactures Everbilt sump pumps, there is no parts list within the instruction book, so it is likely a throw away item when it wears out.
Date published: 2019-08-31
Rated 5 out of 5 by from Moves water. Easy to install, especially if you are just replacing one like me. I had most of the... Moves water. Easy to install, especially if you are just replacing one like me. I had most of the needed parts (the top of the box has a check-list so you can doublecheck before leaving HomeDepot). For me it was a matter of removing my original sump, which was broken and put in the new one with appropriate plumbing. Then make sure the pump floater switches correctly. Either way, it was a great replacement option in my basement which has a frequently damp sump. During a heavy rain it will kick on a few times. Very pleased. Hope it lasts a while.
Date published: 2019-08-24
Rated 4 out of 5 by from This Everbilt sump pump is very well made. The pump runs off of a ½ a horsepower motor, which ma... This Everbilt sump pump is very well made. The pump runs off of a ½ a horsepower motor, which makes it powerful. The base of the pump is made out of cast iron, while the motor shaft column is stainless steel. The pump comes ready to be used from an electrical standpoint. An 8 foot cable is included. The outlet of the pump has to be plumbed with a 1-1/4 inch NPT thread. The pump also includes an adjustable float. The base of the pump requires approximately a foot in diameter basin. Anything smaller and it likely will not fit.
Date published: 2019-09-10
Rated 4 out of 5 by from We chose this 1/2 HP Pedestal Sump Pump to replace our current one, which has been getting stuck ... We chose this 1/2 HP Pedestal Sump Pump to replace our current one, which has been getting stuck on or even failing to come on. This Everbilt 1/2 HP pedestal sump pump was recommended to us by some friends who have had good luck with it. We have a high water table under our house so we needed something reliable to give us peace of mind. This pump claims to lift 57 gallons per minute, so it should have no problem keeping up. It has a 3 year warranty, stainless steel column and cast iron base, it seems to be very well made.
Date published: 2019-08-26
  • y_2019, m_10, d_16, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_308370051, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 42ms
  • REVIEWS, PRODUCT