![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Everbilt | Everbilt | |
Name | 1 in. x 72 in. Plain Steel Flat Bar with 1/8 in. Thick | 1-3/8 in. x 72 in. Zinc Steel Punched Flat Bar with 1/16 in. Thick | 1-1/2 in. x 96 in. Aluminum Flat Bar with 1/8 in. Thick | 2 in. x 3/8 in. x 36 in. Plain Flat Bar |
Price | $1196 | $1298 | $2498 | $2648 |
Ratings | (454) | (127) | (187) | (33) |
Product Thickness (in.) | 0.125 in | 0.063 in | 0.125 in | 0.375 in |
Product Length (in.) | 72 in | 72 in | 96 in | 36 in |
Slotted | Unslotted | Slotted | Unslotted | Unslotted |
Product Width (in.) | 1 | 1.375 | 1.5 | 2 |
Finish Family | Unfinished | Silver Metallic | Silver Metallic | Silver Metallic |
Material | Steel | Steel | Aluminum | Steel |
Type | Bar | Slotted flat | Unslotted flat | Bar |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Everbilt | Everbilt | |
Name | 1 in. x 72 in. Plain Steel Flat Bar with 1/8 in. Thick | 1-3/8 in. x 72 in. Zinc Steel Punched Flat Bar with 1/16 in. Thick | 1-1/2 in. x 96 in. Aluminum Flat Bar with 1/8 in. Thick | 2 in. x 3/8 in. x 36 in. Plain Flat Bar |
Price | $1196 | $1298 | $2498 | $2648 |
Ratings | (454) | (127) | (187) | (33) |
Product Thickness (in.) | ||||
Product Length (in.) | ||||
Slotted | ||||
Product Width (in.) | ||||
Finish Family | ||||
Material | ||||
Type | ||||
View Product | View Product | View Product | View Product |
yes, I cut it into 3 pieces and bent each piece in half to use as an extension on my gear puller. Worked great
Yes. My choice would be to use a cut off disk on a dremmel tool, slow but controllable for a fairly clean cut, an electric or air grinding tool with suitable cutting disk, or even a hack saw.
I don't think they come in colors but you could use spray paint for your application.
Yes. Used outdoors it will rust over time.
Yes, it's steel.
The thin cutting disc on a Dremel tool works surprisingly well, a bit slow but leaves a nice clean cut.
yes this is magnetic.
You can cut the Flat Bar. With that being said, we are unable to provide a response about your application. There are so many factors and variables that go into a project, it’s hard to say if a product will handle weight for a particular job. If you have any doubt or question about weight bearing qualities for their specific project, you would be better suited to consult with an engineering professional. If you are in need of a spec sheet for this product, Customer Care would be able to put you in touch with the manufacturer.
The holes are 3/8" in size. These are nice flat bars. You will like them.
A rep in chat just explained to me that the holes are 3/8" in diameter and 3/4" center-to-center spacing.