The Everbilt 1/4 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection. The pump comes with a 1-year limited warranty.
Aluminum motor housing for efficient motor cooling
Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint, higher efficiency using less energy to operate
8.25 ft. cord length
Submersible for quiet operation
1-1/2 in. FNPT discharge
Semi-open thermoplastic impeller passes 3/8 in. solids
Pumps up to 37 GPM at 10 ft., outperforms the competition
Q:Does this pump come with a discharge hows and if so how long is it?
by|Nov 1, 2023
1 Answer
Answer This Question
A:Â Kevin,
Thank you for your question. No, this is a pump only and does not come with a discharge hose.
Regards,
Everbilt Customer Service
by|Nov 2, 2023
Q:I?m 50 feet from the discharge point in my basement. Will this lift the water 8 feet and push it the 50 feet out to my discharge point?
by|Sep 7, 2023
1 Answer
Answer This Question
A:Â Montanabob, thank you for the question. Yes, this pump will work in the application that you described. This pump is capable of a max lift of 24 feet. in your application you should see around 38 GPM. If you have any other questions feel free to contact us at 844-883-1872. Regards Everbilt customer service.
by|Sep 8, 2023
Q:Is the basin included or is it sold separately?
by|Aug 11, 2023
1 Answer
Answer This Question
A:Â Stacey,
Thank you for your question. The basin is not included with the pump, it is sold separtately.
Regards,
Everbilt Customer Service
by|Aug 11, 2023
Q:Can it be used to clean tankless heater?
by|Jun 11, 2023
1 Answer
Answer This Question
A:Â Wence,
Thank you for your question. We would recommend using a Utility Pump. The SUP54-HD would be a much better fit for this application.
Regards
Everbilt Customer Service
by|Jun 11, 2023
Showing 1-4 of 21
Customer Reviews
4.4 out of 5
(81)
4.4
out of 81 reviews
94% recommend this product
5
51
4
19
3
3
2
3
1
5
Filter by:
Showing 1-10 of 81 reviews
Nov 26, 2021
Everbilt is a respected and reliable brand in pumps
The Everbilt 1/3 HP 110-volt submersible sump pump is a good choice for replacing or installing a clear water sump pump. The unit requires a minimum 18-inch basin. It has an aluminum motor housing for cool operation and is rated for continuous use and has a built-in overload protection. A floating tether switch integrated into the power supply line provides on/off operation as the water level rises in the basin. A threaded removable adaptor accepts 1 ½ inch or 1 ¼ pipe fitting. The 1/3 HP motor provides plenty of capacity, rated at 38 GPM with 10 feet discharge head and 15 GPM with 20 feet discharge head. Base on the motor unit has drilled hole baffle to provide water input. Top has a built-in handle to raise or lower the pump into position. The unit is backed by a one-year warrant. A reliable pump from a trusted brand.
by
Response from Everbilt Customer ServiceNov 29, 2021
ToolTimeTony, thank you for your review. We are so glad that you are satisfied with your pump. If you need anything, please contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
Nice pump. Small, but should meet the needs of most applications. The pump base is all plastic, which I think is fine for something that is in the water all the time. You would just need to be careful not to bang it into anything and break it. My only complaint is the switch wire came with a very bad kink (see photo) in it - it works, but over time this will be a failure point. I don't think the pump ever should have left the factory like that.
by
Response from Everbilt Customer ServiceNov 22, 2021
Charniw, thank you for your review. This is a great pump for many different applications. We are very sorry that there was a kind in the wire. Please let us know if there is anything you need. You can contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
I so happy to receive my Everbilt 1/4 HP aluminum sump pump. It has a tether float switch so it turned on and off automatically. The cord is just a little over 8 feet long. The pump weighs about 8 1/2 pounds. The minimum working temperature is 35 degrees and the maximum temperature of 100 degrees. After doing some research I found out it has some pretty good features. This pump is self priming, non clogging & it has a thermal overload switch to protect the motor. The motor housing is made from aluminum to help keep the motor run cooler. This sump pumps up to 2,000 gallons per minute at 10 feet. This will be a great little pump for home emergencies. It comes with a 1 year limited warranty.
by
Response from Everbilt Customer ServiceNov 22, 2021
Ken, thank you for your review. This is a great pump for your sump needs and is very easy to install. If you need anything, please feel free to contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
I am so happy to receive my Everbilt 1/3 HP aluminum sump pump. It has a tether float switch that turns the pump on and off automatically. This submersible sump pump is built with an aluminum motor housing for efficient motor cooling.This sump pump requires an 18 in. minimum diameter wide sump basin. The motor also has a built with thermal overload protection. This will come in handy during the rainy season. During the rainy season I have a cement vault that get water in it that needs pumped out. It looks like I will need to go to my local Home Depot to get a couple Fittings. I will be prepared and won't have to borrow my friends pump. The pump comes with a 1-year limited warranty.
by
Response from Everbilt Customer ServiceNov 22, 2021
Ken, thank you for your review. Yes, this pump will be great for when the rainy season hits. If you need anything please feel free to contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
Great pump , This pump will work fine when it’s needed. We set it in the garage so when the water level gets up to the top of the cement and to risk it from going into the house, the pump will activate and pump it out into the sink basin. It’s basically a plug and play, and for a quarter hp it should be super efficient. It also has an extra long cord, so it plugged right in the wall outlet.
by
Response from Everbilt Customer ServiceNov 17, 2021
MITCHELL, thank you for your review. This will be a great pump for your needs. If you need anything, please feel free to contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
A good pump - albeit on the small side for horsepower
This pump will give you years of good performance. It is heavy and very well made. The float operates exactly as you expect it and it does not take up a lot of room in the sump hole of your basement or crawl space. With that size, though the trade off is it is only one quarter horse (1/4 HP) power. That may be a bit small for most homes but if you are draining a pool or have a smaller crawl space of water issue then this is perfect for you
by
Response from Everbilt Customer ServiceNov 15, 2021
CRoberts, thank you for your review. This is a great little pump and it is perfect for smaller spaces. We do make this same pump in a 1/3 HP and 1/2HP so that is always an option. If you have any questions, please feel free to contact our customer service at 844-883-1872. Regards, Everbilt Customer Service
Very nice little pump. I was worried it is too small but this thing is well built and has a lot more weight than I expected. Comes with 2 output pipe sizes so you have the flexibility of using either one. I prefer these float switches because in my opinion they last longer and rarely fail. But you must have a large enough and deep enough basin to allow the float free swing from the on to off positions. I measured from the off to on positions and it seems to be about 14 or 15 inches. So make sure your water level can swing that much. If not you should go with the Vertical Switch. It has less movement from on/off so the pump will cycle considerable more. I’m impressed with the quality and can’t wait to put it to work.
by
Response from Everbilt Customer ServiceNov 14, 2021
Archersaway, thank you for your review. This is a great little pump and it works great for your sump basin needs. Yes, the tethered switch does require more water to turn it on so we require a minimum of an 18" diameter basin and it will take approximately 12" of water to turn the pump on, so we recommend that your basin is deep enough. We are glad that you are happy with the build of this pump and can't wait to hear how it works for you. Regards, Everbilt Customer Service
The Superior Pump 1/4 HP submersible sump pump will move up to 30 Gal. of water per minute. This pump is made of corrosion resistant thermoplastic and includes an adjustable tethered float switch with piggy back plug to automatically turn the pump on/off. The 92250 offers a powerful, yet energy efficient (3.8 Amp) thermally protected motor for longer life and durability. The pump features a thermoplastic impeller and 10 ft., replaceable, water proof power cord. Equipped with a suction screen on the bottom this sump pump can whisk away water to 1/4 of an inch from the floor. Pump has a 1-1/4 in. discharge and includes a 1-1/4 in. FIP x 1-1/4 in. FIP or 1-1/2 in. MIP adapter. UL/CUL listed and CSA certified and backed by a 1 year warranty.
Wayne's CDU790 features a durable cast iron base and epoxy-coated housing for long life and quiet operation. This submersible pump is designed for 11 in. or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1-1/2 in. discharge allows easy installation plus maximum flow.
The Superior Pump 1/2 HP submersible sump pump will move up to 55 Gal. of water per minute. This pump is made of corrosion resistant thermoplastic and includes an adjustable vertical float switch with piggy back plug to automatically turn the pump on/off. The 92572 offers a powerful, yet energy efficient (4.9 Amp) thermally protected motor for longer life and durability. The pump features a stainless steel impeller, 1-1/2 in. FIP discharge and 10 ft., replaceable, water proof power cord. This sump pump has side inlets for increased water flow, will handle 3/8 in. solids and is equipped with a suction screen on the bottom. UL/CUL listed and CSA certified and backed by a 3 year warranty.
The Wayne CDU980E submersible sump pump can move up to 5490 Gal. per hour (GPH). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11 in. Dia and larger sump pits.