Internet #308510353

Model # EBAU25-PCP

0659647512898

Everbilt

1/4 HP Pool Cover Pump

  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off when water levels reach approximately 11/16 in.
$ 150 00
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off when water levels reach approximately 11/16 in.
The Everbilt 1/4 HP pool cover pump is designed to remove water from pool covers. It has an innovative and reliable mini-float switch to detect water on pool covers. The mini-float switch will turn the pump on when water levels reach approximately 2-1/4 in. and turn the pump off when water levels reach approximately 11/16 in.
  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off automatically when water levels reach approximately 11/16 in.
  • Can be left plugged in indefinitely
  • 25 ft. power cord with GFCI plug for added protection
  • Strainer base filters debris to minimize clogging and keep pump from tipping over
  • 1-1/4 in. MIP discharge
  • Maximum discharge head of 21-1/2 ft.
  • Energy efficient permanent split capacitor motor

Product Overview

  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off when water levels reach approximately 11/16 in.
Model #: EBAU25-PCP
Internet #: 308510353

The Everbilt 1/4 HP pool cover pump is designed to remove water from pool covers. It has an innovative and reliable mini-float switch to detect water on pool covers. The mini-float switch will turn the pump on when water levels reach approximately 2-1/4 in. and turn the pump off when water levels reach approximately 11/16 in.

  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off automatically when water levels reach approximately 11/16 in.
  • Can be left plugged in indefinitely
  • 25 ft. power cord with GFCI plug for added protection
  • Strainer base filters debris to minimize clogging and keep pump from tipping over
  • 1-1/4 in. MIP discharge
  • Maximum discharge head of 21-1/2 ft.
  • Energy efficient permanent split capacitor motor

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Key Features

Product Overview
Key Features
  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off when water levels reach approximately 11/16 in.
The Everbilt 1/4 HP pool cover pump is designed to remove water from pool covers. It has an innovative and reliable mini-float switch to detect water on pool covers. The mini-float switch will turn the pump on when water levels reach approximately 2-1/4 in. and turn the pump off when water levels reach approximately 11/16 in.
  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off automatically when water levels reach approximately 11/16 in.
  • Can be left plugged in indefinitely
  • 25 ft. power cord with GFCI plug for added protection
  • Strainer base filters debris to minimize clogging and keep pump from tipping over
  • 1-1/4 in. MIP discharge
  • Maximum discharge head of 21-1/2 ft.
  • Energy efficient permanent split capacitor motor

Product Overview

  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off when water levels reach approximately 11/16 in.
Model #: EBAU25-PCP
Internet #: 308510353

The Everbilt 1/4 HP pool cover pump is designed to remove water from pool covers. It has an innovative and reliable mini-float switch to detect water on pool covers. The mini-float switch will turn the pump on when water levels reach approximately 2-1/4 in. and turn the pump off when water levels reach approximately 11/16 in.

  • Includes 3/4 in. garden hose adapter and strainer base
  • Pump turns on when water levels reach approximately 2-1/4 in.
  • Pump turns off automatically when water levels reach approximately 11/16 in.
  • Can be left plugged in indefinitely
  • 25 ft. power cord with GFCI plug for added protection
  • Strainer base filters debris to minimize clogging and keep pump from tipping over
  • 1-1/4 in. MIP discharge
  • Maximum discharge head of 21-1/2 ft.
  • Energy efficient permanent split capacitor motor

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand Little Giant Little Giant Everbilt Wayne
Name PE-1-PCP 0.48 HP Submersible Pool Cover Pump PCK-N 1/40-HP Non-Submersible Manual Pool Cover Pump Kit 1/4 HP Pool Cover Pump 1/4 HP Auto On/Off Pool Cover Water Removal Pump
Price
$85.07
$115.08
$150.00
$174.79
Ratings (4) (1) (11) (183)
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
14 in
Product Height (in.)
10.85 in
Product Width (in.)
14 in

Details

Cord Length (ft.)
25
Features
Quiet Motor,Self-Priming
Gallons Per Hour
1440
Horsepower (hp)
1/4 hp
Material
Thermoplastic
Outdoor Living Product Type
Pool Cover Pumps
Pool Cover Type
Pool Cover Accessories
Pool Type
Above Ground,In Ground
Product Weight (lb.)
10.5lb
Returnable
90-Day
Voltage (volts)
115

Warranty / Certifications

Manufacturer Warranty
1 Year

Specifications

Dimensions

Product Depth (in.)
14 in
Product Height (in.)
10.85 in
Product Width (in.)
14 in

Details

Cord Length (ft.)
25
Features
Quiet Motor,Self-Priming
Gallons Per Hour
1440
Horsepower (hp)
1/4 hp
Material
Thermoplastic
Outdoor Living Product Type
Pool Cover Pumps
Pool Cover Type
Pool Cover Accessories
Pool Type
Above Ground,In Ground
Product Weight (lb.)
10.5lb
Returnable
90-Day
Voltage (volts)
115

Warranty / Certifications

Manufacturer Warranty
1 Year

Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 28ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

1/4 HP Pool Cover Pump is rated 4.9 out of 5 by 11.
Rated 5 out of 5 by from The Everbilt 1/4 HP Pool Cover Pump is my answer to my winter time blues. I live in a warm climat... The Everbilt 1/4 HP Pool Cover Pump is my answer to my winter time blues. I live in a warm climate where the pool doesn't freeze but it is too cold to swim. Some run the pool all winter, I tarp mine for about 6 months (I figure it saves me over $100 per month in electricity and chemicals). The problem I had would be the rain water that would collect on top of the tarp. This would mix with the many leaves landing in the water and made a mess that I would pump out about once per month. I had to stay vigilant because the pump I was using was not automatic and would have to be shut off as soon as the water was pumped out. It was a miserable chore that I dreaded each month. With the Everbilt pump, the pump is left on top of the tarp all winter long and is automatic, turning off and on as needed. Though I have not tried it on the tarp yet (it is swimming season now) I did try it in a puddle after a rainstorm and it pumps very well and shut off with only about a 1/4 inch of water left in the puddle.
Date published: 2019-06-24
Rated 5 out of 5 by from This Everbilt pool cover pump is another fine product from this company. I used to have a pool... This Everbilt pool cover pump is another fine product from this company. I used to have a pool cover and wished I had some way to get that standing water off of it. Then the pool cover needed to be replaced. Now that I have this new cover pump, a new cover has been ordered. The pump has 1/4 hp. It can pump up to twenty four gallons per every minute. There is a GFCI plug with test and reset buttons. It can be left plugged in and will monitor the depth of the water on top of the cover and will turn on at two and a quarter inches and off when there is only 11/16 inches left. The only assembly is to attach the base to the pump. Then a one and a quarter inch discharge hose can be connected or use the included three quarter inch adapter with a same size garden hose. This is certainly a needed item when there is a cover on the pool.
Date published: 2019-06-20
Rated 5 out of 5 by from I’ve always used the suction kind of water removal (i.e., round disk with perforated holes and a ... I’ve always used the suction kind of water removal (i.e., round disk with perforated holes and a long tube) for removing water from my pool cover. They are inexpensive but a pain. You have to always check to see if water has accumulated and to get them started you have to get some suction going or if you are lucky sometimes just wiggle a bit and they start the flow. What I like about this unit it’s automatic, well made and easy to set up. There is a mini-float switch that will turn the pump on. You plug it in and forget about it for the most part. It cycles on and off automatically when the water levels reach approximately 2-1/4 in. and turns the pump off when water levels reach approximately 11/16 in. You still want to check to make sure it doesn’t get clogged especially if you have a lot of trees/leaves. It weights about 10lbs.
Date published: 2019-06-21
Rated 5 out of 5 by from I’m a first-time pool owner and when it came time to open up the pool, I had no way to remove ALL... I’m a first-time pool owner and when it came time to open up the pool, I had no way to remove ALL the water that had gathered atop the pool cover from the melted snow and past rains. I tried to empty it using buckets, but that would have taken forever. So, I did some research and came across this Everbilt 1/4HP pool cover pump. What a difference! Just plop the pump in the middle of the pool cover area, attach a hose where the water will escape to, plug it in, and watch the water disappear before your very eyes. Since this pump includes a float, the pump will stay running until the water drops to 11/16”. At that point, I just removed the pump, removed the pool cover, and that was that. Comes with strainer base and 25-foot power cord.. This pump is a great time saver!
Date published: 2019-06-25
Rated 5 out of 5 by from This submersible pool cover pump, is well executed and thought out. I carefully reviewed all comp... This submersible pool cover pump, is well executed and thought out. I carefully reviewed all components for defects of manufacture, fitment, and I could not find any issues. The Garden Hose Fitting is located on the top of pump, a exacting placement. Well, you don't have to reach down to attach hose. At 1/4 HP this pump will expel water a good distance. It was packed well, and arrived without blemishes.
Date published: 2019-06-21
Rated 5 out of 5 by from AWESOME. The pool cover pump is just what you need for your pool cover. No more bailing out the ... AWESOME. The pool cover pump is just what you need for your pool cover. No more bailing out the water from the cover. Just put the pump on top of the cover, plug it in and attach a hose and let the pump do all the work. The 1/4 horse power is all that you will need. Made of a good durable material that should last a long time. It is not heavy at all and is very easy to set up and use. It is very stylish and I really like the design of the pool pump. Has a great screen at the bottom of the pump to keep att the trash out while sucking up the water off of the cover. Not hard to clean at all, just hose off the bottom of the pump and you are set to go for the next round of pumping water. Once again. AWESOME.
Date published: 2019-07-10
Rated 4 out of 5 by from After investing a small fortune to set up our above ground pool this summer I needed to look into... After investing a small fortune to set up our above ground pool this summer I needed to look into something that would help maintain it throughout our very wet winter as well. I came across this pool cover pump and decided to give it a try. It is easy to assemble, just screw the pump onto the base that helps to stabilize the pump when it is in use. The base also helps to keep leaves etc. from entering the pump. I like the automatic feature as you can just plug it in and it will turn on/off when the rain water reaches a certain level. It has a trip switch plug and you will need a garden hose to drain the water away from your pool.
Date published: 2019-07-03
Rated 5 out of 5 by from I've got a 24 foot round above ground pool and thought this would be a great addition to my wint... I've got a 24 foot round above ground pool and thought this would be a great addition to my winter gear for closing my pool. It is a 1/4 hp and seems a little heavy but it should be ok. Won't get to use until time to close the pool in late September. It will be a lot better than trying to drain the cover with a garden hose. It seems like you can never get all the water drained with just a hose.
Date published: 2019-07-22
  • y_2019, m_8, d_22, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_, sid_308510353, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • REVIEWS, PRODUCT