#1 Home Improvement Retailer

Internet #300539476

Model #E102M 10X06

Store SKU #320451

10 in. x 6 in. 2-Way Steel Wall/Ceiling Register in White

  • Rattle-free and quiet airflow from your central air system
  • Easily control the amount of airflow with smooth glide damper
  • Powder coating is white to fit any decoration scene
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Everbilt
The inside duct width is 10 in. and should be aligned with the size of the vent opening.
The inside duct length is 6 in. and should be aligned with the size of the vent opening.
The outside duct width is 11.75 inches.
The outside duct length is 7.75 inches.
This product is a Register.
This product is to be installed on the Wall or Ceiling.
This product has a 2-Way Air Deflection style.
This product is constructed of a Steel material.
Illustrations may vary from actual product.
The 102M series 2-way air register features a high quality steel outside with a white powder coat finish and the smooth glide multi-shutter damper to control the amount and direction of airflow. Use this register for wall or ceiling openings. The stamped face allows for 2-way air deflection coupled with the Smooth Glide technology to ensure a rattle free, quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use.
  • Wall or ceiling registers controls airflow into a room
  • Smooth glide damper controls the amount and direction of airflow
  • Louvers control the amount and direction of airflow
  • 2-way deflection
  • High quality steel
  • Powder coated white
  • Duct opening measurements
  • Width x height

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Registers & Grilles

10 in. x 4 in. 2-Way Steel Wall/Ceiling Register in White
current product
10 in. x 6 in. 2-Way Steel Wall/Ceiling Register in White
14 in. x 6 in. 2-Way Steel Wall/Ceiling Register in White12 in. x 8 in. 2-Way Steel Wall/Ceiling Register in White
BrandEverbiltEverbiltEverbiltEverbilt
Name10 in. x 4 in. 2-Way Steel Wall/Ceiling Register in White10 in. x 6 in. 2-Way Steel Wall/Ceiling Register in White14 in. x 6 in. 2-Way Steel Wall/Ceiling Register in White12 in. x 8 in. 2-Way Steel Wall/Ceiling Register in White
Price
Ratings
(715)
(715)
(715)
(715)
Maximum Duct Opening Length (in.)4668
Maximum Duct Opening Width (in.)10101412
DecorativeNoNoNoNo
ShapeRectangularRectangular
Outside Width (in.)5.757.757.759.75
Product Weight (lb.)0.991.311.92.2
MaterialSteelSteelSteelSteel
View ProductView ProductView ProductView Product

Specifications

Dimensions

Duct (inside) length (in.)
4 1/8 to 6
Duct (inside) width (in.)
8 1/8 to 10
Outside Length
11.75
Outside Width (in.)
7.75

Details

Air deflection
2-way
Color
Powder Coat White
Color Family
Whites
Decorative
No
Installation Location
Ceiling,Wall
Louvered
Yes
Material
Steel
Maximum Duct Opening Length (in.)
6
Maximum Duct Opening Width (in.)
10
Product Weight (lb.)
1.31
Returnable
90-Day
Shape
Rectangular

Warranty / Certifications

Manufacturer Warranty
None

Questions & Answers

34Questions26Answers

Do these come with the hex mounting screws or are the screws sold separately?

Asked by Bruce February 15, 2021
3
Answers

Hello Bruce, Yes, this register comes with the necessary mounting hardware.

do they have a control knob to control the flow of heat ?

Asked by Dimples February 6, 2021
4
Answers

It has the standard knob they can open or close the vents above more of a slide

What is the distance between screw holes of this 8x4 size? Thanks.

Asked by Bradd21 January 12, 2021
1
Answer

Hello Bradd21, The center-to-center distance of the mounting holes is 8-3/4".

What are outside dimensions

Asked by Rusty September 28, 2020
2
Answers

The Register is approximately 1" bigger all the way around it with attachment screw holes on the ends

How far apart are the screw holes on center

Asked by guydo September 21, 2020
1
Answer

Hello Guydo, On this specific model/size the mounting holes are 8-3/4" center-to-center.

What is the distance between the screw holes? I have a 12 by 6 vent BUT the holes are closer then current models

Asked by Shawn August 5, 2020
1
Answer

Hello Shawn, On the specific model/size, the center-to-center on the mounting holes is 12-13/16" ± 1/16".

What is the maximum net free area of the 10x6 register (acutal cu inches of opening for air to fl...

Asked by 1HDconsumer June 26, 2020
5
Answers

In these type registers and vents, the dimensions (in this case, 10x6, to fit the opening of a 10x6 duct) refers to the actual opening. Typically they are slightly smaller, so true opening size will be about 9 1/2- x 5 1/2. The outside bezel will be about 2- 3" larger, in both dimensions. Sorry for the "approximate" dimensions, but I no longer have this vent available to measure.

Is the 6” x 6” opening for inside opening of shaft? Jeff

Asked by Jeff June 5, 2020
3
Answers

Yes, measured the inside of the ventilation shaft and it fit perfectly.

Will this close off the vent completely? The first floor of my house is freezing with the AC on ...

Asked by Deanna May 27, 2020
4
Answers

Probably about 90- 95%. Fully closed there is some leakage, but not much. This is true of most of these type vents.

the register is 12 x 6 what size do I need ?

Asked by fla May 26, 2020
2
Answers

10x4 is the opening size. If your opening is 12x6 then that’s the size you need.

10 in. x 6 in. 2-Way Steel Wall/Ceiling Register in White - page 2

Customer Reviews

  • 4.7
    out of 715 reviews
  • 96% recommend this product
Filter by:
Showing 1-10 of 715 reviews
I was told to install this type of vent into our cold air return in the basement. This would even...
I was told to install this type of vent into our cold air return in the basement. This would even out our temps in the house. I am a DIY kind of guy, but was concerned I would mess up a brand new furnace and vents. This didn't happen. Took me less than an hour, and the vent adjusts airflow easily so if I want to change or turn off the airflow, it's easy. Installs with only 2 screws too.
by GaryMrVO
This is the second one I've bought within a year because the first one rusted out. This is for my...
This is the second one I've bought within a year because the first one rusted out. This is for my bathroom. I wish it was rust proof. This time I bought some clear Rustoleum and I'm hoping it'll last longer with the extra protection. It fits the area but the screws are a bit too wide for the existing metal plates. I had to use some I had already. There weren't any other options at the store this size so I guess I'd recommend it anyway.
by Rustoleum
Response from TRUaireJul 17, 2020
Hello Rustoleum,
We are sorry to hear that you had to replace our register so quickly after you had purchased it. You mentioned that this registers is going into a bathroom; bathrooms are notorious for high humidity which will cause the register to rust. We offer this size in aluminum face with a steel multi-shutter damper on the back our model "A102M 10X06" or we even offer this size in an all plastic model, our model "102MP 10X06". Either of these models you can special order through Home Depot. To place a special order, your will need to go into your local Home Depot store and at the Pro Desk place the special order for which even model you prefer.
Perfect replacement for original vent in ceiling that was rusted out in the bathroom. Our house ...
Perfect replacement for original vent in ceiling that was rusted out in the bathroom. Our house was built in 1999.
by vguru1
Great quality product. Very sturdy and well made .
Great quality product. Very sturdy and well made .
by AV
Perfect
Perfect
by Bursuc
This is a good replacement part for the old register that shows their age. After years of service...
This is a good replacement part for the old register that shows their age. After years of service the old registers that have been painted several times are due for replacement. The important thing to note is that when replacing the old registers you have to size these for the duct size and not just the overall size. The vent control operates smoothly
by JES
5 people found this helpful
This register is solid and nice looking. The photo is before we screwed it in. It fits well in ...
This register is solid and nice looking. The photo is before we screwed it in. It fits well in standard register openings. It also screws in well. There is no looseness or shakiness in it once screwed in. It looks nice and is easy to adjust. The register is very solid and well-built, so it should last at least for what is left of our lifetime. Good for replacement or in a new structure.
by Wolfbane
1 person found this helpful
Perfect replacements for my old dingy ones.
Perfect replacements for my old dingy ones.
by Rob0212
1 person found this helpful
Perfect replacement for our old vent. Just screw in and done. Looks great.
Perfect replacement for our old vent. Just screw in and done. Looks great.
by Ansley1
1 person found this helpful
Screws are a Nightmare. The Grill is great, well made and preforms well. The problem are the Scre...
Screws are a Nightmare. The Grill is great, well made and preforms well. The problem are the Screws that are provided. The screwheads should be phillip head but they are so overpainted and filled in that you can't use them. I had to use the old flat head screws from the dozen units I replaced which made the job look lousy to me.
by YosemiteSof
2 people found this helpful
Showing 1-10 of 715 reviews