A: The mounting hardware is included with the pull. There is one each of #5/16"x1-1/2" HEX Wood Screw and #5/16"x1-1/4" HEX Machine Screw.
A: Black painted hardware is supplied with this product which includes one 1/4" x 1-1/2" [38mm] long lag bolt for the top mounting hole and one 1/4" x 1-3/16" [30mm] long machine bolt with one flat washer and one hex nut for the bottom mounting hole. The size of the hardware is 1/4" in diameter.
A: I don't know how thick the vinyl is to be able to hold the threads for the screw. The bolt is about 1.5 inches and if that would go through , it might work.
A: To use this Gate Pull on a vinyl fence you would need to use metal screws. You may also need to use washers, depending on the screw head size.
A: The wood screws will work in vinyl if the vinyl is thick enough to hold them. If it's fairly thin, you will probably want to switch them out with through bolts (such as the supplied bolt for the bottom). Also, the supplied machine bolt might not be long enough and would also need to be switched out for a longer one. I hope this helps!
|Name||11-1/8 in. Black Heavy-Duty Gate Pull||Black Iron Heavy Duty Door Pull||10 in. Black Heavy-Duty Door Pull with Rust Defender||8 in. Natural Bronze Cast Bronze Door Pull Handle|
|View Product||View Product||View Product||View Product|