3-1/2 in. Satin Brass 5/8 in. Radius Door Hinges Value Pack (12-Pack)

A:  Hinge pin took with a nail inserted

A:  For the Everbilt 3-1/2 in. x 5/8 in. Radius Matte Black Door Hinge Value Pack (24-Pack), please make sure you are placing the pin in the hole underneath the bottom cap. Also, check the hinge top to make sure it has not been installed upside down with the sealed top of the pin is at the bottom instead. Instructions to remove a pin: To remove the pin, use a hinge pin punch, or nail and hammer method to remove the pin by placing your pin punch/nail in the hole underneath the pin cap at the bottom of the hinge and tap up. We also carry a Hinge Pin Remover tool reference: Internet #318058091 Model #28630 Store SKU #1006702800.

A:  For the Everbilt 3-1/2 in. x 5/8 in. Radius Satin Nickel Door Hinge Value Pack (12 per Pack), the hinges are rated to hold 60 lbs. per 3 hinges.

A:  The Everbilt 3-1/2 in. x 1/4 in. Radius Satin Nickel Door Hinge opens to 310 degrees.

A:  No idea. We've had ours for a couple of years, and they never squeak. WD40?

A:  I think you might've wiped off to much grease, I'd add a light amount to the pin & where the hinge flexs. Should be fine after

A:  I have the same issue. I tried WD-40 but the squeaking came back after a couple months.

A:  One suggestion to quiet the squeaky Everbilt 3-1/2 in. x 5/8 in. Radius Matte Black Door Hinge Value Pack (24-Pack) would be to remove the hinge pin and coat them with a lubricant such 3 oz. Tube Synthetic Grease with Syncolon PTFE that can be found here: https://www.homedepot.com/p/Super-Lube-3-oz-Tube-Synthetic-Grease-with-Syncolon-PTFE-21030/202932687. Another alternative would be to return these hinges and purchase the squeak-free version of the same hinge (3-1/2 in. x 5/8 in. Radius Matte Black Squeak-Free Door Hinge 12-Pack) which can be found here: https://www.homedepot.com/p/Everbilt-3-1-2-in-x-5-8-in-Radius-Matte-Black-Squeak-Free-Door-Hinge-12-Pack-28326/314151693