3-1/2 in. Stainless Steel Heavy Duty Tee Hinge

Substantial and sturdy heavy duty stainless steel hinge. This is a great hinge for something heavy like a solid wood garden gate. I like the included stainless screws that both match the finish and fit in the countersunk holes in the hinge. Overall I'm impressed with how beefy this hinge has been built. I don't see it failing any time soon. It even has washers between the leaves to minimize squeaking.

Wow, when they say heavy duty, they really mean it. The hinge is quite heavy by itself and the label says it can hold up to 50lbs. I plan to use it on a backyard gate which will be perfect. The package comes with only one hinge though, but with this, I am comfortable with using a smaller one on the bottom. The size itself is pretty big, over 3 inches, so many sure you measure your project first and are okay with the look. The hinge bends backwards, but not fully. Item is as described on the website.

I would by all means consider these hinges to be heavy duty, since they are pretty beefy in construction. They have a nice satin stainless finish and have some actual stainless steel in them. They aren't 100% stainless as I could feel a light pull with a magnet on the body. The screws are stainless too but not 100% either as they could be picked up with a magnet although it wasn't a heavy stick on the magnet. Not sure what mix or type stainless they are but not top of the line, plenty enough for a hinge though.

With stainless steel at at 13 ga, or about .094", this is a fairly hefty hinge. The pins are staked and can not be removed or adjusted. The hinge flap rides on plastic bushings, so there's no noise. The back fits perfectly on a standard 2x4. It includes 9, 1" stainless screws. Movement is free, in other words there is a small amount of free play. The screw holes are not finished with a traditional countersink, but pressed with a round, flat die. The result is that the screws do not sit flush. All the weight rides on the plastic bushings, and I can imagine the plastic will wear out quickly in a vertical installation like a gate. These hinges would be more suitable for a flat lid, perhaps for a large outdoor storage box, a custom tool box, or similar. The hinges will close to less than 90 degrees, giving some options for different designs.

This is probably the one I will use in my out doors storage build. I am comparing Stainless versus galvanized versus zinc coatings. I will leave them out all winter in our full range mid- western weather. These are very strong hinges. The are not nearly as long as the other "t" hinges, but the tang is wider to aid in supporting doors without getting pulled down. They come packaged in pairs with the mounting screws included. I would feel confident using these on a wider gate.

This review is for an Everbilt Heavy Duty Stainless Steel hinge. The hinge should be installed in a matching pair for aesthetic reasons. The hinge is very well made and has four screw holes on one side and five on the side that mounts to the gate/door. The hinge comes with stainless steel phillips head screws. The maximum weight load is 60 lbs per hinge or 120 lbs if you use two. I plan to use this one a gate I'm repairing. The old hinge was one of those black wrought iron types. I think the new stainless steel will look great and I'm going to use matching latch hardware. This is a very well made hinge of weather resistant stainless steel. I highly recommend it.

EVERBILT 3-1/2 IN. STAINLESS STEEL HEAVY DUTY TEE HINGE I needed to whip up a quick gate to keep my free range geese from getting on my porch eating my plants and making a mess this hinge did the job. This came with a set of screws but I chose not to use them instead I used longer ones to ensure they would stay in the heavy two by fours and cedar fencing

This hinge is perfectly suitable for applications outside in the weather, because the material is stainless steel. It will sure withstand moisture and water. Mounting hardware is included. It opens and closes smoothly, thanks to the bearing design that removes metal to metal contact. This seems to be a quality product that should last for a long time.

Stainless Steel is most preferable material for making outdoor equipement. This Everbilt 3-1/2 in. Stainless Steel Heavy Duty Tee Hinge will fulfill this requirement. So far, whatever a small gate or larger outdoor door the size is fit for most application. Also there you may find plastic insulation sit between metal part for noise insulation. The whole hinge is made from plain Stainless Steel Sheet Metal by drop cut. So, there is no trim finishinig. For standard metal hinge with galvanized treatment still may rust on certain time of usage. Installation is not a big problem as it is surface mount. The only is to align the hinge at it right position you will have the door ready to open and close. There only minor issue is the screw enclosed with hinge. They are too small and weak. Unless you screw tight with hand not the power screw driver. I suggest you better buy additional stronger screw. Because it will easily strip the philip screw headf. Also, for larger door you may use up two or more hinge.

Tee Hinge Stainless steel material. 3.5 inch with 60lb per hinge working load. I like the bearing connections to eliminate metal on metal. FYI bearing seems to be a bushing made of plastic. Replacing an old plastic hinge on our outdoor gate. Setting screws included in the package . The stainless steel material has a smoother finish along being impervious to rust. With so many uses you can't go wrong. FYI this comes 1 each per package .