Store SKU #
A: The Everbilt 3-1/2 in. Satin Nickel Square Corner Door Hinge diameter is L 81.2mm and W 5.9mm.
A: The Everbilt 3-1/2 in. Satin Nickel Square Corner Door Hinge is GB Standard.
A: I don't know if the steel that is used in these hinges conform to ASTM or GB standards. I have them in my home for indoor use and they work just fine. The load that they carry is small to nominal & they are indoors so are not exposed to severe climate conditions. I doubt that most hinges of this type meet such standards. Sounds like you concern is somewhat overkill & unjustified unless they are to be used for very heavy doors or outdoors.
A: The 3-1/2 in. Satin Nickel Square Corner Door Hinge should be in the open position. You can use a hinge pin punch to remove the pin.
A: Remove the bottom plug using vice grips and hammer. Hinges in the vice would help. Twist it and tap it and it will come out. Once the bottom plug removed, use a punch, long nail to push out the pin, clean it, lubricate it, and reinsert it.
A: In order to remove the pin the hinge needs to be in the open position. You can then use a hinge pin punch to remove the pin.
|Name||3-1/2 in. Stainless Steel Square Corner Security Door Hinge||4 in. Satin Brass Square Radius Squeak-Free Door Hinge (3-Pack)||4 in. Stainless Steel Square Corner Security Door Hinge||4 in. Bright Brass Decorative Square Corner Door Hinge with Finial|
|Hardware Finish Family||Silver||Brass||Silver||Brass|
|Material||Stainless Steel||Steel||Stainless Steel||Steel|
|Hinge Feature||Squeak Proof|
|View Product||View Product||View Product||View Product|