#1 Home Improvement Retailer

Internet #204760767

Model #20492

Store SKU #347162

3-1/2 in. Zinc-Plated Inside Corner Brace (4-Pack)

$498
/package
  • The product design is ideal for reinforcing 90° angle joint
  • Wider width provides greater area of stability and strength
  • Countersunk screw holes provide tight grip and clean look
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

++
Price:
$498

Product Overview

The Everbilt 3-1/2 in. Inside Corner Braces (4-Pack) are ideal for reinforcing the inside or right-angled corner joints. Countersunk design allows fasteners to sit flush with base material. Easy to install.
  • Made of steel
  • Zinc-plated finish
  • Screws included
  • Ideal for use with wood

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Corner Braces

Top Rated2-1/2 in. Zinc-Plated Double-Wide Corner Brace (2-Piece per Pack)
current product
3-1/2 in. Zinc-Plated Inside Corner Brace (4-Pack)
3 in. Zinc-Plated Heavy Duty Corner Brace (2-Pack)4 in. Zinc-Plated Heavy Duty Corner Brace (2-Pack)
BrandEverbiltEverbiltEverbiltEverbilt
Name2-1/2 in. Zinc-Plated Double-Wide Corner Brace (2-Piece per Pack)3-1/2 in. Zinc-Plated Inside Corner Brace (4-Pack)3 in. Zinc-Plated Heavy Duty Corner Brace (2-Pack)4 in. Zinc-Plated Heavy Duty Corner Brace (2-Pack)
Price
$465
/package
$498
/package
$555
$792
Ratings
(53)
(36)
(138)
(138)
Product Depth (in.)1.5 in0.56 in0.06 in0.125 in
Product Width (in.)2.5 in1.06 in0.87 in0.87 in
Product Length (in.)2.5 in3.5 in3 in4 in
MaterialZincZincZincZinc
Brace typeAngleAngleAngleFlat
Fasteners IncludedFasteners IncludedFasteners IncludedFasteners IncludedFasteners Included
FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional Features
Connector FinishNoneNoneNoneNone
View ProductView ProductView ProductView Product

Specifications

Dimensions

Assembled Depth (in.)0.01 inAssembled Height (in.)0.01 in
Assembled Width (in.)0.01 inProduct Depth (in.)0.56 in
Product Length (in.)3.5 inProduct Width (in.)1.06 in

Details

Brace typeAngleBuilders Hardware Product TypeBraces
ColorZincColor FamilySilver
Connector FinishNoneFasteners IncludedFasteners Included
FeaturesNo Additional FeaturesMaterialZinc
Package Quantity4Returnable90-Day

Warranty / Certifications

Manufacturer WarrantyNone

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.2
    out of 36 reviews
  • 85%recommend this product
Filter by:
Showing 1-10 of 36 reviews
The 2 in. Zinc-Plated Inside Corner Brace worked just fine for additional support to hold wood th...
The 2 in. Zinc-Plated Inside Corner Brace worked just fine for additional support to hold wood that was being used for latches to secure a wooden door I built. They are perfect size and add plenty of support with one corner brace installed on each side of the wood and used on both top and bottom of the door. So the 4 pack was just perfect and would recommend for any similar project.
by
  • Recommended
1 found this review helpful
Easy to apply
Just what the table needed.
by
  • Verified Purchase
  • Recommended
Worked good for a corner brace on chest of drawers.
They worked fine for my application. But they are countersunk on the wrong side.
by
  • Verified Purchase
  • Recommended
1 found this review helpful
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
  • Verified Purchase
by
  • Verified Purchase
by
  • Verified Purchase
Used to hold down a plywood counter top in my garage. Braces was more than adequate for this purp...
Used to hold down a plywood counter top in my garage. Braces was more than adequate for this purpose.
by
  • DIY
  • Verified Purchase
  • Recommended
Good, but countersink is on the wrong side.
Inside corner brace should have countersunk holes on the inside part of the bracket, not outside which is where these brackets have them
by
    • Recommended
    347 162 Corner Bracket Countersink drilling of the holes is on the WRONG side of the bracket.
    Part number 347 162 3-1/2 in Zink-Plated Corner Brackets have a production error. The countersink holes are drilled on the wrong side of the metal. The screws go into the inside corner bracket on the 90 degree inside dimension of the bracket. The face of this side does NOT have countersunk tapers as needed for the flat head screws which are furnished. The picture on Home Depot's website of 347 162 is not totally clear, but when you have a bracket in your hand, you can tell the picture of the bracket is incorrect. There are also two indented bumps both of the inside faces of the bracket which are designed to push into the wood to further anchor the bracket which are on the wrong side. These brackets are found in the stores close to the latches and hinges.
    by
      2 found this review helpful
      Rating provided by a verified purchaser...
      Rating provided by a verified purchaser
      by
      • Verified Purchase
      Showing 1-10 of 36 reviews