#1 Home Improvement Retailer

Internet #

204281340

Model #

800250

Store SKU #

190006

3/8 in.-16 x 2-1/2 in. Zinc Plated Carriage Bolt (25-Pack)

$1717
/box
  • Extremely sturdy load-bearing fastener
  • Square neck prevents the bolt from turning once installed
  • Smooth round head is safe for furniture and play equipment
  • View More Details
Store
0 in stock
caret

Product Details

Carriage bolts have a smooth rounded head with a square neck underneath that locks into wood when tightened. Use with a pre-drilled hole and secure with a hex nut and washer to prevent spinning. They are great fasteners for decks, play equipment, docks, fencing, and furniture.

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

31Questions
caret
Q:what is the corrosion or rust difference between galvinized or zinc bolts?
by|Mar 19, 2022
1 Answer
Answer This Question

A:  For the Everbilt 5/16 in.-18 x 4-1/2 in. Zinc Plated Carriage Bolt (25-Pack), the Zinc is corrosion/rust resistant but will rust if the coating is destroyed or if exposed to a marine environment. While Galvanized will last much longer since it has better corrosion/rust resistance that zinc.

by|Mar 21, 2022
    caret
    Q:Please by the GRACE OF GOD ..please show me individual carriage bolts which are 3/8 , 1-1/2 inch ...
    by|Jul 13, 2021
    2 Answers
    Answer This Question

    A:  EVERBILT carriage bolts are 42 cents each at Home Depot in size 3/8" x 1 1/2" . The internet# is 204633649, the model# is 800236 and the sku# is 188962.

    by|Apr 7, 2022

      A:  The Store SKU for the individual 3/8"-16x1-1/2" Zinc Carriage Bolt is 188-962.

      by|Jul 14, 2021
        caret
        Q:What grade are the bolts?
        by|Oct 17, 2020
        4 Answers
        Answer This Question

        A:  The 1/2 in.-13 x 10 in. Zinc Plated Carriage Bolt (10-Pack) is grade A307.

        by|Oct 26, 2020

          A:  not sure, but it below a grade 5 and possibly a grade 2 or 3. I used it to keep a base bracket in place, just as a fastener.

          by|Oct 18, 2020

          A:  They are grade 307A

          by|Mar 6, 2022

            A:  Not sure. However they are certainly not grade 8 or above.

            by|Jan 12, 2022
              caret
              Q:What is the weight capacity for this bolt
              by|Jun 8, 2020
              1 Answer
              Answer This Question

              A:  The tensile strength of this carriage bolt is min 60 ksi.

              by|Jan 20, 2023
                Showing 1-4 of 31
                caret

                Customer Reviews

                4.7 out of 5
                (668)
                • 4.7
                  out of 668 reviews
                • 99%recommend this product
                Filter by:
                Showing 1-10 of 668 reviews
                The tinsel strength of these bolts are not very good. I was able to snap a bolt in half when tigh...
                The tinsel strength of these bolts are not very good. I was able to snap a bolt in half when tightening down on the nut using a small socket wrench. Maybe it was a defective bolt didn't have an issue with the others.
                by
                • DIY
                • Verified Purchase
                • Recommended
                The everbilt zinc 1/4 x 20 x 1 was used with 48" x 1" Aluminum straps to repair aboveground pool ...
                The everbilt zinc 1/4 x 20 x 1 was used with 48" x 1" Aluminum straps to repair aboveground pool wall that was discovered damaged during our installation of a new liner.
                by
                • Verified Purchase
                • Recommended
                It’s a carriage bolt. It holds things together. Worked marvelously
                It’s a carriage bolt. It holds things together. Worked marvelously
                by
                • Verified Purchase
                • Recommended
                I had one of the screws to get stuck in the hole and in trying to get it out the tip got bent and...
                I had one of the screws to get stuck in the hole and in trying to get it out the tip got bent and now the nust won't go on
                by
                • Verified Purchase
                • Recommended
                Qualified response as one of the bolts I purchased was NOT threaded to end of bolt. I had to cut...
                Qualified response as one of the bolts I purchased was NOT threaded to end of bolt. I had to cut it short with hack saw. Quality control issue?
                by
                • Verified Purchase
                • Recommended
                1 found this review helpful
                These carriage bolts were easy to install. They did the job and they will continue to do the job....
                These carriage bolts were easy to install. They did the job and they will continue to do the job. I use them to make a home made bed frame that will last a very long time
                by
                • Verified Purchase
                • Recommended
                Worked great
                Worked great
                by
                • Verified Purchase
                • Recommended
                Well, it's a bolt... I bought these for sistering floor joists and decided to go with 4.5" becaus...
                Well, it's a bolt... I bought these for sistering floor joists and decided to go with 4.5" because my old joists were not straight and I needed extra length to pull them together. They holding up pretty good. Just keep in mind that they are not for use with treated lumber.
                by
                • Verified Purchase
                • Recommended
                1 found this review helpful
                Carriage bolts are perfect for are deck. No worrying about it fallen apart. Easy to use.
                Carriage bolts are perfect for are deck. No worrying about it fallen apart. Easy to use.
                by
                • Verified Purchase
                • Recommended
                Used for cornhole board legs. Works great!
                Used for cornhole board legs. Works great!
                by
                • Verified Purchase
                • Recommended
                Showing 1-10 of 668 reviews

                Frequently Bought Together

                +
                +
                Price:
                $1717

                Compare Similar Carriage Bolts

                current product
                3/8 in.-16 x 2-1/2 in. Zinc Plated Carriage Bolt (25-Pack)
                1/2 in.-13 x 2-1/2 in. Zinc Plated Carriage Bolt (20-Pack)3/8 in.-16 x 4-1/2 in. Zinc Plated Carriage Bolt (25-Pack)1/2 in.-13 x 4 in. Zinc Plated Carriage Bolt (20-Pack)
                BrandEverbiltEverbiltEverbiltEverbilt
                Name3/8 in.-16 x 2-1/2 in. Zinc Plated Carriage Bolt (25-Pack)1/2 in.-13 x 2-1/2 in. Zinc Plated Carriage Bolt (20-Pack)3/8 in.-16 x 4-1/2 in. Zinc Plated Carriage Bolt (25-Pack)1/2 in.-13 x 4 in. Zinc Plated Carriage Bolt (20-Pack)
                Price
                $1717
                /box
                $2020
                /box
                $2635
                /box
                $2790
                /box
                Ratings
                (662)
                (662)
                (662)
                (662)
                Fastener Length (in.)2.52.54.54
                Fastener PlatingZincZincZincZinc
                Package Quantity25202520
                Measurement StandardUNCUNCUNC,UNCUNC
                Fastener Length2-1/2 in2-1/2 in4-1/2 in4 in
                Size3/8 in1/2 in3/8 in1/2 in
                GradeA307A307A307A307
                Fastener Thread TypeCoarseCoarseCoarseCoarse
                MaterialSteelSteelSteelSteel
                View ProductView ProductView ProductView Product