Stick a pair of needle nose pliers into the two holes of the backing plate and unscrew it.
This magnetic door stop with catch can be painted after proper paint prep. Be sure to use a high quality primer that's compatible with your choice of paint. Be aware that painting the product could impact the magnetic qualities.
I would say no. I would say this is more to keep doors that close on their own open or doors that are closed by slight breezes.
The magnetic door stop is not recommended for outdoor use as rust will occur.
Ours are installed in hollow doors. You may want to tap the door where the stopper would go (about an inch above the bottom and an inch in) to listen and see if there is wood. I'm pretty sure hollow core doors still have real wood around the perimeter edges.
No.. the magnet is only strong enough to hold open a free swinging door. I don't believe the magnet is strong enough to hold open a door with an automatic door closing device.
I don't think so. The magnet is pretty strong.
The door stop magnetic force is 7 lbs. and suits most of the doors. Please check the instructions about installing the magnet.
Delivered early . Great product. Easy to instal in 15 minutes or less
You can unscrew the side connected to the wall so there is nothing protruding in a couple seconds. You can also unscrew the side on the door byt it doesn't stick out that far so you probably wouldn't need to.