#1 Home Improvement Retailer

Internet # 202034116

Model # 15296

Store SKU # 339466

3 in. Zinc-Plated Flat Corner Brace (4-Pack)

$3.67
  • Ideal reinforcement for flat-surface, right-angle corner joints
  • Perfect for use on wood both indoors and outdoors
  • Beveled screw holes to countersink screws
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 30 days of purchase. Read Return Policy

Product Details

About This Product

When you need reinforcement on the inside of flat-surface right angled corners, the exclusive Flat Corner Brace from Everbilt makes a perfect solution. It features a countersunk design that allow screws to sit flush with the material. Suitable for both indoor and outdoor applications. Best of all, it is durable, rust-resistant and simple to install.

Highlights

  • Ideal reinforcement for flat-surface, right-angle corner joints
  • Perfect for use on wood both indoors and outdoors
  • Screws included
  • 4 hole design
  • Return Policy

Product Information

Internet # 202034116

Model # 15296

Store SKU # 339466

Additional Resources

Shop All Everbilt
From the Manufacturer

Specifications

Dimensions

Product Depth (in.)

0.06 in

Product Length (in.)

3 in

Product Width (in.)

0.5 in

Details

Brace type

Flat

Builders Hardware Product Type

Braces

Color

Zinc

Color Family

Silver

Connector Finish

None

Fasteners Included

Fasteners Included

Features

No Additional Features

Material

Zinc

Package Quantity

4

Returnable

30-Day

Warranty / Certifications

Manufacturer Warranty

None

Questions & Answers

20Questions
caret
Q:How thick is the 4x4 corner brace?
by|Jul 29, 2023
1 Answer
Answer This Question

A:  They are fairly thin, 0.075".

by|Jul 30, 2023
    caret
    Q:How wide is the material (not length, not thickness) = looks about 1/2"???
    by|Sep 3, 2021
    1 Answer
    Answer This Question

    A:  For the Everbilt 2 in. Zinc-Plated Flat Corner Brace (4-Pack), each leg of this corner brace is 3/8 inches wide.

    by|Mar 13, 2023
      2 found this answer helpful
      caret
      Q:How long are the included screws?
      by|Sep 17, 2020
      1 Answer
      Answer This Question

      A:  The included screws are 1/2" long.

      by|Oct 28, 2023
        caret
        Q:what is the diameter of the holes?
        by|Aug 6, 2020
        1 Answer
        Answer This Question

        A:  The diameter of the holes for this corner brace are 0.170-0.160”

        by|Apr 17, 2024
          1 found this answer helpful
          Showing 1-4 of 20

          Customer Reviews

          4.7 out of 5

          • 4.7 out of 215 reviews
          • 90% recommend this product
          Filter by:
          Showing 1-10 of 215 reviews
          Does the job for a decent price
          I wish I could say that I use these types of brackets for frames around nice artwork or nice cabinetry, but most of the time I use these types of straight or angle brackets for kluge repairs that hopefully no one will ever see-- even me. This four pack is nice and a good price. The best thing is that they are galvanized and the holes are tapered or counter sunk specifically for the included screws.
          by
          • Recommended
          I use a lot of these corner braces for different projects. This one is simply top of the line in quality. it will not flex at all. Everbilt has a large selection of different types of brackets and braces to choose from for purchase.
          by
          • Verified Purchase
          Everbilt Galvanized Corner Brace is a Durable Product!
          The Everbilt 3 inch Galvanized Corner (4-Pack) is a great product to have for all of your DIY projects. First, the product is galvanized and that will allow it to be very durable in many different conditions. It does come with very easy to read instructions and everything is very straightforward in terms of measurements. This is a great product to have for cabinetry and other bracing needs.
          by
          • Recommended
          Perfect solution for weak corner joints
          I got the Everbilt 3 in. Galvanized Corner Brace to review for free. I've used this type of plate before to reinforce corner joints in furniture and bookshelves and it works great for that to hold two pieces of wood boards. The plate is just the right thickness and provides a strong connection. It comes with screws so all you need to do is position it, drill pilot holes and screw it in.
          by
          • Recommended
          It's ok.
          I am not sure how to write a review about a piece of simple hardware but here goes.......... These are zinc plated, not galvanized, so I would not use these around water or maybe even outdoors in a damp climate. The holes are countersunk on one side for use with flat head screws. The plates are fairly straight and free of defects. They are about 1/16" thick, maybe just under.
          by
          • Recommended
          Corner Brace
          These are very sturdy corner braces. I use them all over the homestead to make things a bit more sturdy. Great for holding together corners in garden boxes and multiple uses in the barn. GREAT for shoring up a door that wants to sag. Very easy to use and done in a flash. They do take the paint well if you want to cover them up. This set comes with all the screws so it is a one buy thing and no searching around for the right size screw.
          by
          • Recommended
          Were the steel meets the wood
          Everbuilt corner brace,bracket. Built to last, zink plated,for optional in or outdoor purposes. Notice in photos that the screw holes are counter sunk on one side only. This has duie purposes, firstly the screws heve a tapered head ment for flush fit to the surface of the brace. Secondly, the hole in the brace is larger than the shaft of the screw and when the screws are installed fully into thr counter sunk edge of the brace the head is flush . So if your going to cover your work with paneling you dont want screw heads sticking up. Mu potos will also show a dual method of installation. One on each side in two directions.
          by
          • Recommended
          Simple corner brace
          A corner brace needs to be sturdy but blend in. This corner brace is strong enough to hold projects together while still being able to let the project shine. The zinc finish can be painted to blend in. The screw holes are counter sunk to make the screw heads flush to the brace. The included screws are 3/4 inch long for easy attachment. I used mine to put a board on a desk to stop things from falling off the back.
          by
          • Recommended
          Simple bracket for your home use
          Simple and effective bracket to support whatever small project you are completing around the house. I used mine to secure my new utility sink against the wall to prevent movement and dislodging my plumbing below. Made of simple metal, it has all reach three inches to meet most of the do-it-yourself needs. I have a drawer full of different sizes to use on my projects
          by
          • Recommended
          Decent Hardware, Not Galvanized
          First off, these are not galvanized braces but rather zinc plated steel. Zinc will resist corrosion for a while, but the finish will inevitably corrode over time. The upside is the thinner gauge is more malleable and can be molded slightly to address base material deformities. Screw holes are countersunk to assure a smooth flat installation. The screws are just 3/4" long, which is perfect for common cabinet doors and similar applications. However that length may compromise strength depending on what it's fastened to. The 3" brace length is adaptable for a wide range of repairs.
          by
          • Recommended
          Showing 1-10 of 215 reviews

          Compare Similar Items

          current item

          Product Depth (in.)

          0.06 in

          0.06 in

          0.08 in

          0.06 in

          Product Width (in.)

          0.5 in

          2 in

          1.25 in

          0.37 in

          Product Length (in.)

          3 in

          2 in

          8 in

          1.5 in

          Brace type

          Flat

          Flat

          Flat

          Flat

          Material

          Zinc

          Zinc

          Steel

          Zinc