![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Everbilt | Everbilt | Everbilt |
Name | 6 in. Zinc-Plated Corner Brace | 4 in. Galvanized Flat Corner Brace (2-Pack) | 8 in. Zinc-Plated Corner Brace | 10 in. Galvanized Corner Brace |
Price | $398 | $496 | $530 | $848 |
Ratings | (113) | (8) | (113) | (29) |
Product Depth (in.) | 1 | 0.06 | 0.25 | .22 in |
Product Width (in.) | 6 in | 4 in | 8 in | 1.24 in |
Brace type | Angle | Flat | Angle | Angle |
Product Length (in.) | 6 | 4 | 8 | 10 in |
Material | Zinc | Galvanized Steel | Zinc | Galvanized Steel |
Features | No Additional Features | No Additional Features | No Additional Features | No Additional Features |
Fasteners Included | Fasteners Not Included | Fasteners Included | Fasteners Not Included | Fasteners Not Included |
Connector Finish | None | None | None | None |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Everbilt | Everbilt | Everbilt |
Name | 6 in. Zinc-Plated Corner Brace | 4 in. Galvanized Flat Corner Brace (2-Pack) | 8 in. Zinc-Plated Corner Brace | 10 in. Galvanized Corner Brace |
Price | $398 | $496 | $530 | $848 |
Ratings | (113) | (8) | (113) | (29) |
Product Depth (in.) | ||||
Product Width (in.) | ||||
Brace type | ||||
Product Length (in.) | ||||
Material | ||||
Features | ||||
Fasteners Included | ||||
Connector Finish | ||||
View Product | View Product | View Product | View Product |
The distance between the 1st and 3rd (outermost) holes on each leg of the 6 in. brace is 4-3/8 inches center to center.
For this Corner Brace, the diameter of the holes is 0.293”. A 1/4” screw can fit but we recommend to using #12x1-1/2” flat head tapping screws.
The corner brace is 0.157 inches thick.
The holes for this Corner Brace are 0.31 inches.
These Corner Braces are only zinc-plated, they will eventually rust. Store SKU 282-928, Galvanized 10 inch corner brace would be a better application.
This corner brace can hold 60 pounds.
The thickness of this corner brace is 4mm.
They are not folded sharply and are only suitable for inside angle use. The radius is simply too large at the fold. They are also not square. Use a shelf support bracket instead.
Yes, it is.
For this corner brace the diameter of the hole is 3/8".