Model # 18397

Internet #202041871

Store SKU #831395

Everbilt 60 in. Sliding Door Set
0030699183975

Everbilt

60 in. Sliding Door Set

  • The track is made of galvanized steel for corrosion resistance
  • Designed for doors 3/4" to 1-3/8" thick weighing up to 60 lbs.
  • Ideal for doors up to 60 in. wide; can be cut down to any length
$1398 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Installation Options

Product Overview

  • The track is made of galvanized steel for corrosion resistance
  • Designed for doors 3/4" to 1-3/8" thick weighing up to 60 lbs.
  • Ideal for doors up to 60 in. wide; can be cut down to any length
The Everbilt 60 in. Bi-Fold Sliding Door Set allows 2 sliding closet doors to move smoothly and quietly. It is designed for doors with a thickness of 3/4 - 1-3/8 in. that weigh up to 60 lb. Its floor guide can withstand strong impacts and the jump-proof V-shaped track is made with corrosion-resistant galvanized steel for durability.
  • Made of corrosion-resistant galvanized steel
  • Designed to allow closet doors to roll quietly and smoothly
  • Floor guide can withstand strong impacts
  • Dial-adjust hangers allow up to 5/16 in. vertical door adjustment
  • Designed for 2 sliding closet doors with a thickness of 3/4 - 1-3/8 in. each
  • Detailed instructions included for easy installation
  • Pre-drilling required for installation
  • Set includes dial-adjust hangers, door alignments, a V-shaped track, rollers, a floor guide and hardware
  • NOTE: Dial-adjust hangers come with two different offsets; when installing doors with 3/4 in. thickness use #2 hangers (1/8 in. offset) on the rear door; when installing doors with 1-3/8 in. thickness use #1 hangers (7/16 in.) on the rear door; refer to step 7 in instructions

Product Overview

  • The track is made of galvanized steel for corrosion resistance
  • Designed for doors 3/4" to 1-3/8" thick weighing up to 60 lbs.
  • Ideal for doors up to 60 in. wide; can be cut down to any length
Model #: 18397
Sku #: 831395
Internet #: 202041871

The Everbilt 60 in. Bi-Fold Sliding Door Set allows 2 sliding closet doors to move smoothly and quietly. It is designed for doors with a thickness of 3/4 - 1-3/8 in. that weigh up to 60 lb. Its floor guide can withstand strong impacts and the jump-proof V-shaped track is made with corrosion-resistant galvanized steel for durability.

California residents: see   Proposition 65 information

  • Made of corrosion-resistant galvanized steel
  • Designed to allow closet doors to roll quietly and smoothly
  • Floor guide can withstand strong impacts
  • Dial-adjust hangers allow up to 5/16 in. vertical door adjustment
  • Designed for 2 sliding closet doors with a thickness of 3/4 - 1-3/8 in. each
  • Detailed instructions included for easy installation
  • Pre-drilling required for installation
  • Set includes dial-adjust hangers, door alignments, a V-shaped track, rollers, a floor guide and hardware
  • NOTE: Dial-adjust hangers come with two different offsets; when installing doors with 3/4 in. thickness use #2 hangers (1/8 in. offset) on the rear door; when installing doors with 1-3/8 in. thickness use #1 hangers (7/16 in.) on the rear door; refer to step 7 in instructions

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Price
$11.98 /each
$13.98 /each
$14.98 /each
$23.98 /each
Name 48 in. Sliding Door Set 60 in. Sliding Door Set 72 in. Sliding Door Set 96 in. Sliding Door Set
Brand Everbilt Everbilt Everbilt Everbilt
Ratings (16) (30) (31) (9)
Hardware Finish Family Wood-Unfinished Wood-Unfinished Wood-Unfinished Wood-Unfinished
Material Steel Steel Steel Steel
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
2.08
Product Height (in.)
1.06
Product Width (in.)
58.375

Details

Builders Hardware Product Type
Closet Door Hanging/Mounting Kit
Finish
Unfinished
Hardware Finish Family
Wood-Unfinished
Material
Steel
Returnable
30-Day

Warranty / Certifications

Manufacturer Warranty
None

Specifications

Dimensions

Product Depth (in.)
2.08
Product Height (in.)
1.06
Product Width (in.)
58.375

Details

Builders Hardware Product Type
Closet Door Hanging/Mounting Kit
Finish
Unfinished
Hardware Finish Family
Wood-Unfinished
Material
Steel
Returnable
30-Day

Warranty / Certifications

Manufacturer Warranty
None

Questions & Answers

Can this be used with doors that weigh 78 lbs ?

Asked by: Loretta
"No". This track is designed for a maximum 55 lb. doors.
Answered by: arromeck
Date published: 2018-03-01

Can this track be cut? It is a little long. Thank you.

Asked by: Rick
Yes it can. It can also accommodate an opening that is wider than the track is long as long as the rollers are placed inboard from the edge of the door far enough so they don't exit the track before the door comes to rest against the jamb.
Answered by: arromeck
Date published: 2018-03-01

Can I use this with older doors that currently run on a bottom track? They are light hollow doors.

Is there something about doors that run on a bottom track that makes them unable to be outfitted with a top track only system like this? I really like the look of not having a bottom track running along my nice new floor. It seems like my handyman doesn't think I can do this and I just am not understanding what is different about the doors as we have another set of doors same size that are running on a top track only and I don't see what is different about them.
Asked by: jenfromzen
There is nothing that would prevent this from replacing a bottom track setup. Simply mount the upper track, remove the existing bottom track, mount the wheels on the doors as per the instructions in the package. The obvious considerations are max door thickness being 1-3/8" and whether or not the door length has to be cut in order to accommodate the track. If the doors being hollow core have to be cut the inner frame of the door may have to be reworked. This isn't a big deal but does require some knowledge and time. Since time is money your handyman may be thinking the cost in labor would make it not worthwhile. If you have the tools and the ability to modify the doors, then certainly, this can be done.
Answered by: arromeck
Date published: 2018-03-01

How do I hang 1 inch doors?

Which order should the rollers be for 1 inch doors? And what should my offset from the header be?
Asked by: rluain
I may have reversed the hanger number, just use hanger that pushes door forward for outside door, router and hang back door with hangers that pull it back
Answered by: Hehmum
Date published: 2016-09-28
  • y_2018, m_6, d_17, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_, sid_202041871, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 294ms
  • QUESTIONS, PRODUCT

Customer Reviews

60 in. Sliding Door Set is rated 3.5 out of 5 by 30.
Rated 5 out of 5 by from This was an easy install but like some others I bought this a few years ago and on an off trying ... This was an easy install but like some others I bought this a few years ago and on an off trying to figure out why the doors were rubbing. There were no #1 or #2 on the hangers. As a DIY it wasn't clear how the hangers go on the door so I put it any old way now I see how the hangers go and all is good. Front door hangers are flush. Back door hangers are offset. Hope this helps the next DIYer.
Date published: 2018-05-31
Rated 3 out of 5 by from Had to buy a new 2 1/8 hole saw to... Had to buy a new 2 1/8 hole saw to jerry rig a hole for the oversized pulls. Pulls should be changed to 1 1/2or so such that the whole world with a set of spade bits can drill hole for the pulls in 1 minute. All else is good.
Date published: 2018-04-10
Rated 4 out of 5 by from I just bought it and installed it. What worries me is the weight capacity of 60 lbs. I installed ... I just bought it and installed it. What worries me is the weight capacity of 60 lbs. I installed it with two 1 3/8" 32"x80" semi solid doors. We'll see how it holds.
Date published: 2018-05-22
Rated 3 out of 5 by from It works but the track is narrower than the old... It works but the track is narrower than the old one so it's harder to slide.
Date published: 2018-03-13
Rated 1 out of 5 by from Too weak, I have to buy another one. ... Too weak, I have to buy another one.
Date published: 2018-06-06
Rated 5 out of 5 by from Great parts easy kit... Great parts easy kit
Date published: 2018-05-22
Rated 4 out of 5 by from Pay Attention to door hangers Everything was really easy to install until I tried to hang the 1 3/8 inch door and it would not slide past the other door. Pay close attention to the hangers. You will notice they are not exact. One set the wheels sit closer to the middle (back door) the other is closer to the edge of the door ( front door). I had to read a previous review before I noticed the difference. Once I got the right hangers together the doors slide with no problems.
Date published: 2015-03-22
Rated 4 out of 5 by from Be sure to read instructions carefully. Item 7 I used this set to replace my old set which had a damaged track due to mal adjusted doors and off track episodes with jamming by previous owner which caused dents in the track which I was unable to fix. The track in this kit was 58.5 inches which required no cutting to fit my finished opening of 58.75. The instructions are vague when it comes to describing the hangers. Unlike my old set, this set has two different "offset" measurements. Be sure to read item 7 of the instructions. The hangers with the 7/16" offset must be mounted on the door which will install first nearest the inside of the close. VERY IMPORTANT STEP. The adjustable hangers made squaring the doors to the edge quite easy. I now have a nice smooth operating bypass door set on my closet. No more "bumpity bump".
Date published: 2015-10-19
  • y_2018, m_6, d_17, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_, sid_202041871, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 371ms
  • REVIEWS, PRODUCT