#1 Home Improvement Retailer

Internet #206758282

Model #49072

Store SKU #1001687347

7/8 in. Clear Screw on Bumpers (4 per Pack)

  • Ideal for use on the bottom of heavy furniture and chairs
  • Screw-on anti-skid protection
  • Makes a great bumper for doors as well
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

7/8 in. Clear Screw Bumpers (4 per pack) are great under lightweight accessories and appliances. The non-marking, rubber protects surfaces from scratches and deadens sound. They can also be used for industrial and institutional doors.
  • General duty SurfaceGard bumpers are screw-mounted and cushioned for sound-dampening and protection of walls, doors and floors
  • Round bumper with integrated screw hole can be attached to various surfaces to remedy contact with neighboring surfaces
  • Easy to install - Pre-drill pilot hole to avoid wood splitting and drive screw through base and securely into wall, floor, or door
  • Not intended for use on angled chair or table legs
  • 7/8 in. diameter round clear bumpers 3/8 in. tall with recessed screw holes and (4) 1/2 in. long screws - 4 Pack

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Individual Product Height (in.)
.44
Individual Product Width (in.)
.94
Maximum Inside Diameter (in.)
.81
Minimum Inside Diameter (in.)
.20

Details

Builders Hardware Product Type
Bumper
Color
Clear
Color Family
Clear
Material
Other
Package Quantity
4

Warranty / Certifications

Manufacturer Warranty
1 year against defects in material and workmanship

Questions & Answers

8Questions13Answers

Are the screws stainless steel?

Asked by ANIBAL February 26, 2021
1
Answer

Hi ANIBAL, These are not stainless steel they are zinc coated steel screws.

Are these heat resistant? I want to use these on my cutting board and store it on top of the toas...

Asked by River February 24, 2021
1
Answer

Hi River, Putting these on a cutting board is a great idea, but we don't recommend that you store it with these bumpers on top of the toaster oven.

how much of the screw extends above the bumper?

Asked by buster October 10, 2020
1
Answer

Hi Buster - The screw extends 1/4" above the bumper.

Are these bumpers heat resistant? I want to use them for my fire pit windguard.

Asked by Angel18 August 18, 2020
1
Answer

Thank you for asking Angel18- These are great for many outdoor uses but we do not recommend these for use near high heat or flames.

How big are the screws? Will a quarter inch wide screw work?

Asked by Coceaux August 6, 2020
1
Answer

Thanks for your question HB- The screws provided are approximately 3/16"w X 1/2"l. The hole size on this bumper is 3/16". A 1/4" wide screw might be a tight fit and could cause the bumper to split.

are the screws stainless steel?

Asked by Anthony April 27, 2017
3
Answers

Yes they are

How "high" are these bumpers?

Asked by Dee September 9, 2016
3
Answers

They lift your item slightly less than 1/2". See pic.

Do these come in black?

Asked by Booba June 27, 2016
2
Answers

I only saw white and clear in the Home Depot.

Customer Reviews

  • 4.7
    out of 19 reviews
  • 92% recommend this product
Filter by:
Showing 1-10 of 19 reviews
Very useful and sturdy bumpers! I used these for the bottom of my triangle frame that housed a m...
Very useful and sturdy bumpers! I used these for the bottom of my triangle frame that housed a military flag from my father's funeral. I have it on my entertainment center and it kept sliding around and scuffing up the top of my piece of furniture. These bumpers are rubbery and soft but very sturdy. They have an indented middle that you screw into your item. (see pics). Once I installed these bumpers, the frame sits perfectly in place without sliding around. I'm very happy with these bumpers and would highly recommend them!
by JoJo
2 people found this helpful
Review of Everbilt screw on bumpers Protecting wood floors is an ongoing battle for me. I have t...
Review of Everbilt screw on bumpers Protecting wood floors is an ongoing battle for me. I have tried numerous products and I always end up with seriously scratched floors. I put some sort of protection on any of my furniture that is on wood floors. The most common is the fabric kind. However, I find that over time the stickiness on the fabric wears off and the furniture seriously scratches the floors. See the diagram below for a sample of a ruined Hickory floor. The other kind of floor protection I have tried is the plastic type. It looks good and scratches the floor a little less but scratches non-the less. The hard plastic just digs in with use and the floor gets ruined. I tried the Everbilt Screw-On feet and I have had great results. They are made of a great non-slip soft neoprene type substance. There is virtually no scratching or digs on my floor at all. I put them on wooden chairs that have no leg protection. I then used them with some guests who came over for dinner. So, they got lots of pushing back and forth from the dinner table. This would have been a prime time to destroy the floors. But they did not. Not one scratch or floor mark could be found. If only I had known about these before and used them for my couch and ottoman. The couch could really have benefitted from something like with. And because of their non-stick quality it would have kept the couch from sliding around on the floor the way it has been doing. Unlike the plastic and fabric kind, these do require a little more effort to install. But it is an effort that is well worth while. A screw, which is included in the package is inserted through the middle of the foot protector to secure it to the furniture leg. It is easy to screw in, either by hand or with a power screwdriver. It took me about two minutes to place four of these on one chair. This is a product that is well worth the slight additional effort to protect your floors.
by ROBERT
1 person found this helpful
These bumpers were just perfect for protecting the back side of my Holiday 1/2 tree which I made ...
These bumpers were just perfect for protecting the back side of my Holiday 1/2 tree which I made for the exterior side of my garage. The wind would always move it and tilt it out of place, causing black scrape marks on the siding. I was able to attach the 4 (approx. 1/2" thick by 7/8" wide) bumpers at the ends of the back side of the tree so it no longer scraped and damaged the siding. Photos give the detail below.
by Hobbyist
1 person found this helpful
Good quality with consistent finish that seems to do the job as expected. There are 4 bumpers an...
Good quality with consistent finish that seems to do the job as expected. There are 4 bumpers and 4 screws in the package. Easy to install, just create small pilot hole and screw into intended item you wish to provide protection capabilities (it or other items). It can take around 5 minutes to install in most situations. My only concern is that the included screws have limited extension past the bottom of the bumper. Depending on the application they might not grab properly and come off over time. Maybe a 1/4" longer would be appropriate, but that would also depend on the size/width of the item its being attached to. Probably not an issue on smaller lighter objects. There are couple of logical usages for these bumpers. One is to protect either the item you attach the bumpers to or to protect whatever the item will be in contact with including the floor/wall or others adjacent items. You can provide some elevation to the item that it is attached to if you add them to the bottom. The hard plastic material is a safe way to protect a variety of more expensive flooring materials. Use these if you are getting creative with unique items that did not provide such protection when originally purchased/repurposed, or to replace broken/nonfunctional equivalents. I am not aware of the weight limitations for usage. I recommend this product.
by CaptainPico
2 people found this helpful
Takes a minute to install!
There are so many different ways you can use these bumpers to protect surfaces from getting damaged. Very easy to install
by Young
A perfect transaction in all ways! Thank you!
A perfect transaction in all ways! Thank you!
by MassachusettsJane
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by Will
Good bumpers....
Good bumpers.
by NCP
These worked perfectly as legs for the cutting board I installed them on and look great!
These worked perfectly as legs for the cutting board I installed them on and look great!
by txhomeowner
Easy install.not slip.will buy more....
Easy install.not slip.will buy more.
by Huil
Showing 1-10 of 19 reviews