Designed for light-duty anchor applications, these ribbed plastic anchors prevent the anchor from turning in the hole during installation. They expand as the screw is tightened for a secure hold and feature a split to ensure expansion on two opposing sides. Features a classic white finish for a simple look.
Q:Will this work on bricks? To hang picture frames.
by|Dec 29, 2022
2 Answers
Answer This Question
A: Yes. But you need to drill a hole in the mortar between the bricks. It might be too hard to make a hole in the brick itself. I've place them in the mortar and they are still working 6-10 years later.
by|Jan 23, 2023
A: Everbilt #8-10 x 1 in. White Ribbed Plastic Anchor with Pan-Head Combo Drive Screw (10-Piece) is appropriate for drywall application, would not recommend for brick application.
by|Jan 3, 2023
Q:What is the recommended plastic anchor for concrete
by|Dec 2, 2021
1 Answer
Answer This Question
A: Everbilt #8-10 x 1 in. White Ribbed Plastic Anchor with Pan-Head Combo Drive Screw (10-Piece) will be appropriate for concrete application. For this application noted (1/2” drywall, 5/8” drywall, concrete block, solid concrete, and Hardy Board) you would use a 3/16" drill bit.
by|Dec 3, 2021
Q:What size drill bit should I use with this anchor
by|Jan 28, 2021
1 Answer
Answer This Question
A: For the #8-10 x 1 in. White Ribbed Plastic Anchor with Pan-Head Combo Drive Screw (10-Piece) we suggest 3/16" drill bit.
by|Apr 17, 2021
1 found this answer helpful
Showing 1-4 of 6
Customer Reviews
4.4 out of 5
(100)
4.4
out of 100 reviews
88% recommend this product
5
61
4
27
3
5
2
1
1
6
Filter by:
Showing 1-10 of 100 reviews
Apr 19, 2019
This is a ten piece package of metal pan head screws and plastic anchors. The screws are number 8...
This is a ten piece package of metal pan head screws and plastic anchors. The screws are number 8-10 screw size, and the plastic anchors are three sixteenth by one inch long. they are good for hanging pictures or decorations on different non wood walls, they can be used on drywall or plaster. Drill a three sixteenth hole in marked position, insert plastic anchor, be sure to set it firmly in wall to engage the plastic tab, which helps stop turning or twisting in the wall when tightening the screw. Insert the screw and you are set.
These plastic anchors and screws are for light-duty anchor applications. If you plan to use these...
These plastic anchors and screws are for light-duty anchor applications. If you plan to use these anchors and screws in 1/2 in. sheet rock the shear load limit is approximately 22 lbs. They are not recommended for overhead use. A 3/16 in. drill is required for installation of the anchor. The ribbed plastic anchors prevent the anchor from turning in the hole during installation. They expand as the screw is tightened for a secure hold and feature a split to ensure expansion on two opposing sides. They have a classic white finish for a simple look. I like the pan head screws for hanging picture frames that have wire for hanging and wall clocks.
Needed extra support for a handrail. These Everbilt White Ribbed Plastic anchors hold up well. Easy to install.
by
Nov 8, 2023
by
Nov 8, 2023
by
Nov 8, 2023
I've used this product for over 20 years. Highly recommended! Never fails. Use it to hang wall shelves and heavier art work.
by
Nov 1, 2023
Anchors and screws what I needed
by
Oct 25, 2023
by
Oct 18, 2023
Not negative but it sure seems these plastic anchors are getting cheaper all the time. If you don’t drill the hole a size larger then listed the anchor will fold before it’s totally seated. This is true with most I’ve bought from other sellers as well.
by
Oct 18, 2023
These do the job and well! Sometimes you have one of thr bunch that breaks down on you, but you know that very early in the process! These are a must have in every tool box though!
Designed for light-duty anchor applications, these ribbed plastic anchors prevent the anchor from turning in the hole during installation. They expand as the screw is tightened for a secure hold and feature a split to ensure expansion on two opposing sides. Features a colorful green hue for a vibrant look.
Designed for light-duty anchor applications, these ribbed plastic anchors prevent the anchor from turning in the hole during installation. They expand as the screw is tightened for a secure hold and feature a split to ensure expansion on two opposing sides. Features a classic white finish for a seamless look.
Hang crown moulding easily with the Focal Point 4-1/8 in. Quick Clip (crown moulding not included). The quick clips are durable and lightweight and can be painted or finished prior to installation. The clips feature an easy clip-on design, so you can hang moulding easily with no nails or screws.