Black Deluxe Latch Gate Set

The latch to the Black Deluxe Latch Gate Set can be installed on either side of the gate no matter if it swings in or out. Please be sure to follow the directions for installation depending on whether the latch gate set is installed right-handed or left-handed.

This can be used on vinyl fencing but the screws need to be changed to machine screw sized 5/16” together with corresponding washer and nut. The screw length will depend on the thickness of fence.

The "strike" for this kit is 6.4" in length and is not sold separately.

The set include the following types of screws: For hinge (12 pcs), latch (2pcs), and bar (2pcs) use 5/16” x 2” lag screws for a total 16 pcs. For handle use 1/4”x 1” lag screw (2pcs), and 5/16”x1-1/4” lag bolt (1pc) with nut and washer.

This Fate Set is designed to be locked with a padlock. Either a combination lock or cable lock with a combination could be solutions that would not require a key.

you would have to go to Everbilt website with model number and see if they sell replacement parts. you may be able to find them at home depot where the specialty nuts and bolts are.

Yes it can. Look at the attached photo. See the area circled in red? That little bolt moves forward, and back, in it’s slot (which locks, or unlocks, the jaws. Simply slide the bolt into the locked jaw position and then put the padlock hasp through the open part of the slot.

Please reach out to Customer Care and they can put you in touch with the manufacturer. We are unable to respond without additional information.

I bought this E-clip from Home Depot also just yesterday, An associate helped me find in another store as her store didn't have it in stock, I drove to the other store and an associate there took to the department that had screws, fasteners and such. He was very happy to help me, I was also happy.

unbolt the outward facing side, remove the slide component. Attach the slide component to the removed side then bolt the side w/the slide component back on.