#1 Home Improvement Retailer
$2640
Apply Now
Pay $1.40 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Removes dangerous lint build-up
  • Reduces drying time
  • Helps extend the life of your dryer
Store
0 in stock
Text to Me
caret

Product Details

The Drill Powered Duct Brush helps to remove lint build up and debris in your dryer duct as well as other general ducting. This brush can be used manually or attached to a drill for increased power. The brush kit includes a 4 in. Dia brush head and (6) 2 ft. flexible rods that can be used to extend the brush up to 12 ft. in length.
  • Kit includes synthetic head brush and 6 rods
  • Use with or without drill to remove lint buildup
  • Helps reduce dryer time
  • Helps extend the life of your dryer
  • Return Policy

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

51Questions
caret
Q:What is the minimum radius that this product will bend?
by|Jan 27, 2023
0 Answer
Answer This Question
caret
Q:Does it work in AC vents?
by|Jan 16, 2023
1 Answer
Answer This Question

A:  Depending on the size of the vents, you'll probably have to work it around a little, but I think it would work fine. I used mine for my heating ducts.

by|Jan 19, 2023
    caret
    Q:Are the rods flexible
    by|Dec 31, 2022
    4 Answers
    Answer This Question

    A:  Yes

    by|Jan 8, 2023

      A:  Yes, works well cleaning out my curved dryer vent. 

      by|Jan 6, 2023

        A:  Yes

        by|Jan 7, 2023

          A:  Yes, their joints can bend. 

          by|Jan 6, 2023
            caret
            Q:How to get the brush outside the vent? It?s stuck inside the vent, it?s broken. Thanks
            by|Nov 20, 2022
            2 Answers
            Answer This Question

            A:  As I understood from University of YouTube, you put drill in the forward (tightening) setting as you push the brush up inside vent; then you KEEP the drill in the same forward setting (don't reverse it!) If you put drill in reverse, the brush disconnects

            by|Jan 10, 2023

              A:  I had this same problem. There was no way to get it out without going under the house and disconnect the duct work. I do not recommend this product. The fiberglass extensions twisted so hard they are also permanently bent.

              by|Dec 1, 2022
                1 found this answer helpful
                Showing 1-4 of 51
                caret

                Customer Reviews

                4.4 out of 5
                (964)
                • 4.4
                  out of 964 reviews
                • 88%recommend this product
                Filter by:
                Showing 1-10 of 964 reviews
                Absolutely Wonderful
                This dryer cleaning tool was incredible. Our vent was completely clogged up and this was very easy to use and cleaned the whole thing out to where it was almost shiny inside. Highly recommend.
                by
                • Verified Purchase
                • Recommended
                Works Great
                My vent is vertical just like the picture on the package. I bought 2 kits in case 12 feet wouldn’t be long enough. 12 feet was just enough to do the job, very easy to use with or without a drill. I highly recommend this vent cleaning kit.
                by
                  • Recommended
                  1 found this review helpful
                  Fantastic Product!!!
                  I read many reviews, decided to make the purchase. Easy to use! Attaching rods to a drill did the extra work. Dryer should dry MUCH better now huh
                  by
                    • Recommended
                    4 found this review helpful
                    Worked great! Amazing how much junk came out of the...
                    Worked great! Amazing how much junk came out of the duct.
                    by
                    • Verified Purchase
                    2 found this review helpful
                    Works well but the user needs to use common sense. The rods are a balance between rotational sti...
                    Works well but the user needs to use common sense. The rods are a balance between rotational stiffness and lateral flexibility. One has to work slowly and carefully depending on the radius and number of bends. A good variable speed drill is a must. Also the amount of debris in the vent will have a great impact on the speed one can progress. The vent I cleaned hadn't been cleaned for 15 years. I twisted a kink in one of the rods when I got too aggressive. I realized that I was pushing more and more debris as I moved forward causing more resistance. I decided that I needed to clear the loosened lint as I moved along so I used a ring clamp to cover the inner vent opening with a thick mil plastic and then cut a cross slit in the middle allowing me to insert my shop vac hose into it with a good seal. I had it in blower configuration and it blew the loosened lint out. I could then go back in with the brush, loosen some more and repeat. It was helpful that I could remove the outer vent flap and work from both directions with the brush. Any tool requires some skill from the user. I recommend it.
                    by
                      • Recommended
                      21 found this review helpful
                      Highly recommend
                      This product gets the job done with ease! My dryer wasnt drying anymore and I knew it had to be a clogged vent. I kept having to dry the same load multiple times. I waited far too long to get this cleaning kit!! I wish I had purchased sooner. It cleaned my vent and there was soooo much in there I had no idea. Now my dryer is actually drying the first time I start it and quickly!
                      by
                        • Recommended
                        2 found this review helpful
                        Highly recommend
                        This product gets the job done with ease! My dryer wasnt drying anymore and I knew it had to be a clogged vent. I kept having to dry the same load multiple times. I waited far too long to get this cleaning kit!! I wish I had purchased sooner. It cleaned my vent and there was soooo much in there I had no idea. Now my dryer is actually drying the first time I start it and quickly!
                        by
                          • Recommended
                          1 found this review helpful
                          Does a great job. Didn’t bother to attach it to...
                          Does a great job. Didn’t bother to attach it to our drill, wasn’t necessary. We have a long distance from the dryer vent to where it discharges outside (approx. 154” total length w/2 curves) so the extra attachments to extend the length were very helpful and necessary.
                          by
                          • Verified Purchase
                          5 found this review helpful
                          It worked like a charm. Very easy to use in my drill. It pulled out this much stuff from my vent....
                          It worked like a charm. Very easy to use in my drill. It pulled out this much stuff from my vent. The tool was just long enough to reach from the floor to the roof. Great job. Thanks
                          by
                          • Verified Purchase
                          • Recommended
                          2 found this review helpful
                          It is pretty terrific. I was worried about...
                          It is pretty terrific. I was worried about opening one of the joints on my vent with the brush but the brush and rods are very flexible. When I insert the brush in the vent line it stopped so then I started spinning it with my drill and it went around the bend in the vent line. I recovered a lot of lint which is a fire hazard. My dryer vent is over 20 feet long and this product only has 12 feet of rod. I will be going back to the Home Depot to get a second one so that I can finish the job.
                          by
                          • Verified Purchase
                          1 found this review helpful
                          Showing 1-10 of 964 reviews

                          Frequently Bought Together

                          Exclusive
                          +
                          +
                          Price:
                          $2640

                          Compare Similar Gas Fittings & Connectors

                          ExclusiveWide Mouth Dryer Vent Hood in White
                          current product
                          ExclusiveDryer Vent Cleaning Kit
                          Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. FIP x 60 in. Stainless Steel Gas Connector 3/8 in. O.D. (24,900 BTU)Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. FIP x 60 in. Stainless Steel Gas Connector 5/8 in. O.D. (93,200 BTU)
                          BrandEverbiltEverbiltBrassCraftBrassCraft
                          NameWide Mouth Dryer Vent Hood in WhiteDryer Vent Cleaning KitSafety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. FIP x 60 in. Stainless Steel Gas Connector 3/8 in. O.D. (24,900 BTU)Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. FIP x 60 in. Stainless Steel Gas Connector 5/8 in. O.D. (93,200 BTU)
                          Price
                          $1858
                          $2640
                          $2942
                          $4167
                          Ratings
                          (351)
                          (963)
                          (1)
                          (0)
                          MaterialAluminumOther
                          View ProductView ProductView ProductView Product